• Korean Journal of Plant Resources
• /
• v.25 no.2
• /
• pp.193-199
• /
• 2012

This study was carried out to evaluate the agronomic characteristics and biological activities of $Sorghum$ $bicolor$ germplasms introduced from USA. Plant height, stem diameter, tiller number, leaf length, leaf width, leaf vein color, ear type, ear length and ear width have different from the cultivated accessions. Sweet-N-Sterile (#4) showed the tallest height, widest ear-width and stem diameter. Most of $Sorghum$ $bicolor$ plants may be available to use for bio-energy from these results showing big biomass. Antioxidant activities of 11 cultivars collected from USA were examined by DPPH assay and reducing power. Among the cultivars, Premium stock (#1), Early Sumac (#7), SS Silage (#9) and WGF Grain Sorghum (#11) showed a significantly higher antioxidant activity in comparison to others. Early Sumac (#7) and SS silage (#9) showed more strong reducing power activities than ${\alpha}$-tocopherol, a positive control. Premium stock (#1), Sweet-N-Sterile (#4), Early Sumac (#7) and SS Silage (#9) were also showed high antioxidant activities by DPPH assay and reducing power experiment. BMR Gold I (#3) displayed strong antimicrobial activity against $Escherichia$ $coli$ at minimum inhibitory concentrations (125 ${\mu}g$/ml).

• Journal of Radiation Industry
• /
• v.6 no.1
• /
• pp.31-40
• /
• 2012

There are two methods to fabricate the readout electronic to a large-area CMOS image sensor (LACIS). One is to design and manufacture the sensor part and signal processing electronics in a single chip and the other is to integrate both parts with bump bonding or wire bonding after manufacturing both parts separately. The latter method has an advantage of the high yield because the optimized and specialized fabrication process can be chosen in designing and manufacturing each part. In this paper, LACIS chip, that is optimized design for the latter method of fabrication, is presented. The LACIS chip consists of a 3-TR pixel photodiode array, row driver (or called as a gate driver) circuit, and bonding pads to the external readout ICs. Among 4 types of the photodiode structure available in a standard CMOS process, $N_{photo}/P_{epi}$ type photodiode showed the highest quantum efficiency in the simulation study, though it requires one additional mask to control the doping concentration of $N_{photo}$ layer. The optimized channel widths and lengths of 3 pixel transistors are also determined by simulation. The select transistor is not significantly affected by channel length and width. But source follower transistor is strongly influenced by length and width. In row driver, to reduce signal time delay by high capacitance at output node, three stage inverter drivers are used. And channel width of the inverter driver increases gradually in each step. The sensor has very long metal wire that is about 170 mm. The repeater consisted of inverters is applied proper amount of pixel rows. It can help to reduce the long metal-line delay.

• Korean Journal of Environment and Ecology
• /
• v.35 no.4
• /
• pp.398-407
• /
• 2021

This study intended to identify causes of poor tree vigor in the Hanbando coastal forest by investigating its geographical environment, climate condition, soil physicochemical characteristics, and growth condition of Pinus thunbergii. It divided the forest into an area with poor tree vigor or dead standing trees and a control area with good tree vigor and examined them separately. The survey showed that stand density was significantly higher in the area with poor tree vigor. In contrast, the crown width in the area with good tree vigor was wider. The number of dead standing trees and the stand density showed a negative correlation. The stand density and diameter at breast height (DBH), tree height, crown height, and crown width also showed a negative correlation. The result indicated that, as the tree's stand density increases, the crowns of individual trees overlapped and the lower branches died. Then crown height and crown width decreased, and the number of leaves and photosynthesis was reduced, leading to lower tree height and weaker growth of breast diameter. As a result, tree vigor weakened, and combined with environmental pressures from the lack of moisture and nutrients in coastal soil and salty wind, P. thunbergii in coastal areas is expected to die massively. Although the causes of dead standing trees and poor tree vigor of P. thunbergii in the Hanbando coastal forest are complicated, poor management of adequate tree density in response to the growth of P. thunbergii is the primary cause. The secondary cause is external environmental pressures, including unfavorable soil conditions and salty and strong wind that obstruct the growth of P. thunbergii.

• Journal of Biomedical Engineering Research
• /
• v.43 no.1
• /
• pp.11-18
• /
• 2022

An electromagnetic generator with variable stimulation parameters is required to conduct basic research on magnetic flux density and frequency for pulsed electromagnetic fields (PEMFs). In this study, we design an electromagnetic generator that can conduct basic research by providing parameters optimized for cell and animal experimental conditions through adjustable stimulation parameters. The magnetic core was selected as a solenoid capable of uniform and stable electromagnetic stimulation. The solenoid was designed in consideration of the experimental mouse and cell culture dish insertion. A voltage and current adjustable power supply for variable magnetic flux density was designed. The system was designed to be adjustable in frequency and pulse width and to enable 3-channel output. The reliability of the system and solenoid was evaluated through magnetic flux density, frequency, and pulse width measurements. The measured magnetic flux density was expressed as an image and qualitatively observed. Based on the acquired image, the stimulation area according to the magnetic flux density decrease rate was extracted. The PEMF frequency and pulse width error rates were presented as mean ± SD, and were confirmed to be 0.0928 ± 0.0934% and 0.529 ± 0.527%, respectively. The magnetic flux density decreased as the distance from the center of the solenoid increased, and decreased sharply from 60 mm or more. The length of the magnetic stimulation area according to the degree of magnetic flux density decrease was obtained through the magnetic flux density image. A PEMF generator and stimulation parameter control system suitable for cell and animal models were designed, and system reliability was evaluated.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.1
• /
• pp.74-81
• /
• 2010

The effects of different levels of natural clay enterosorbent on the growth, nutrient availability, and genital organs of post-weaning female pigs fed with an addition of zearalenone (ZEA) were investigated in the study. A total of thirty-five post-weaning gilts ($L{\times}Y{\times}D$) with an average body weight of 12.36${\pm}$1.46 kg were used in the test. The gilts were raised individually in metabolism cages and fed a corn-soybean meal-whey basal diet with an addition of 0 or 1 mg/kg of ZEA for 24 d with four levels of natural clay enterosorbent added in the feed. The treatments were: i) control; ii) control+2.5 g/kg clay; iii) control+1 mg/kg ZEA; iv) control+1 mg/kg ZEA+1.25 g/kg clay; v) control+1 mg/kg ZEA+2.5 g/kg clay; vi) control+1 mg/kg ZEA+5.0 g/kg clay; vii) control+1 mg/kg ZEA +10 g/kg clay. Pigs fed diets contaminated with additional purified ZEA had significantly reduced apparent digestibility of crude protein (CP), gross energy (GE) and apparent metabolic rate of GE (ME/GE, p<0.05) without changes of net protein utilization (NPU, p>0.05). Final body weight, average daily gain (ADG), average daily feed intake (ADFI), vulva length, vulva width, vulva area, relative weights of genital organ and proliferative changes of the ovary tissues in gilts fed ZEA-contaminated diet were increased (p<0.05) compared to the gilts fed the control diet. Addition of natural clay enterosorbent in the ZEA-contaminated diet showed a positive protection effect on ZEA feeding, and the protection was increased linearly or quadratically as clay content increased. However, in pigs fed a diet with clay alone at 2.5 g/kg level there was no significant impact (p>0.05) on all the parameters as compared to the control. It is suggested that feeding ZEA at about 1.0 mg/kg for 24 days might result in a deleterious effect in pigs, and addition of 5 or 10 g clay enterosorbent per kg diet can effectively neutralize the detrimental effects of the ZEA feeding.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2280-2288
• /
• 2014

The conventional dimming control methods of LED (Light-emitting dioades) include Analog, PWM (Pulse Width Modulation), and FM (Frequency Modulation) Control. Analog dimming is controlled by adjusting forward current of Power LED. Although Analog dimming is possible to control linearly the brightness levels on a whole range (0%~100%), it comes into existence a variation of wavelength by changing the Power LED's forward current. PWM dimming has achieved by varying in duty of full current flowing to the Power LED. Generally, PWM dimming doesn't make variation of wavelength but have difficulty with adjusting the linear brightness level between 0% and 10%. FM dimming method is on the same wavelength as PWM dimming, however, it has problem of flickering at low level of dimming. This paper propose a efficient dimming control method of Power LED in order to overcome the disadvantages of the above mentioned methods. We apply to Analog method in low level of dimming control and use PWM method in dimming range from 10% to 100%. For the experiment, we design and implement a circuit and test the proposed method. Consequently, we can control the linear brightness of Power LED across the whole range and get the constant wave at different dimming level. The experimental results show the benefits of the proposed method.

• Journal of People, Plants, and Environment
• /
• v.24 no.6
• /
• pp.609-617
• /
• 2021

Background and objective: The nanobubbles remain stable in water, and it increased dissolved oxygen (DO) in the water that promotes the seed germination and the plant growth. We evaluated the seed germination and growth of sprouts (radish, wheat, and barley) and leafy vegetables (red mustard and pak choi) when irrigated with various DO of nanobubble water (NB). Methods: The oxygen NB was generated by surface friction and treated in 4 levels: NB 0% (control, DO 9.21 mg·L^-1), NB 20% (DO 15.40 mg·L^-1), NB 33% (DO 20.93 mg·L^-1), and NB 100% (DO 39.29 mg·L^-1). Results: The root length of radish and wheat increased more in NB 33% than the control plot. The fresh weight increased in NB 33% compared to the control plot in radish and wheat, and both fresh and dry weight increased more in NB 20%, NB 33%, and NB 100% than the control plot of barley. The leaf length and width of red mustard decreased more in NB 33% and NB 100% than the control plot and NB 20%, which indicated the leaf compactness. The fresh and dry weight of shoot and root increased more in NB 100% than the control plot in red mustard. In pak choi, the shoot fresh weight increased more in NB 100% than the control plot. In leafy vegetables, the germination rate of red mustard in NB 100% was higher than the control plot, however, it was not significantly different between oxygen NB plots in sprout vegetables. Conclusion: The results showed that the root growth and biomass increased after applying NB 33% in sprout vegetables. The leaf growth properties as the number of leaves and leaf size were not significantly different or decreased in NB treatments compared to control plots, but NB 100% (DO 39.29 mg·L^-1) effectively increased the root growth and plant biomass in leafy vegetables.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.52-61
• /
• 2011

Whereas recent researches have elucidated the positive ecological roles of large wood (LW) in fishbearing channels, LW is also recognized as a negative factor of log-laden debris flows and floods in densely populated areas. However in Republic of Korea, no study has investigated longitudinal variations of LW distribution and dynamic along the stream corridor. Hence to elucidate 1) physical factors controlling longitudinal distribution of LW and 2) their effect on variation in LW load amount, we surveyed the amount of LW with respect to channel morphology in a mountain stream, originated from Mt. Ki-ryong in Inje, Gangwondo. Model selection in the Generalized Linear Model procedure revealed that number of boulder (greater than or equal to 1.0 m in diameter), bankfull channel width and their interaction were the best predictors explaining LW load volume per unit channel segment area (unit LW load). In general, boulders scattered within small mountain streams influence LW retention as flow obstructions. However, in this study, we found that the effect of the boulders vary with the channel width; that is, whereas the unit LW load in the segment with narrow channel width increased continuously with increasing boulder number, it in the segment with wide channel width did not depend on the boulder number. This should be because that, in two channels having different widths, the rates of channel widths reduced by boulders are different although boulder numbers are same. Our findings on LW load varying with physical factors (i.e., interaction of boulder number and channel width) along the stream corridor suggest understanding for longitudinal continuum of hydrogeomorphic and ecologic characteristics in stream environments, and these should be carefully applied into the erosion control works for systematic watershed management and subsequent disaster prevention.

• Journal of Korea Water Resources Association
• /
• v.45 no.6
• /
• pp.569-581
• /
• 2012

The levee is the facility which is constructed along with river for the protection of landside and for passage of water when there is a flood. When the seepage is exposed to the atmosphere on the landside surface of levee, it may eventually lead to levee failure. The seepage water may be removed from the landside surface by a properly designed drainage system. The purpose of the study is to show seepage control effect of a pervious toe drain, and to compare two drainage methods of a pervious toe drain. One is the pervious toe drain suggested by U.S. Army Corps of Engineers (USACE) and the other is that suggested by Japan Institute of Construction Engineering (JICE). The levee model constructed has the following dimension: the base width is 2.6 m; the crest width is 0.4 m; the side slope 1 : 2. The water depth in the riverside is 0.5 m. The shape of the toe drain by USACE is triangular. The shape of the toe drain by JICE is rectangular. They were installed with the base length of 0.4 m. The levee model without the toe drain showed saturation surface on the land side in the experiment but not with the toe drain. The experiment results was applied to a numerical analysis model using SEEP/W to calibrate and verify. The numerical analysis results for 35 cm and 30 cm drain width showed that the drain by JICE is a little bit safer than the drain by USACE. It is also easier to construct the toe drain by JICE. The results in the study would be applied to plan the seepage control for a levee with pervious toe drain.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.715-720
• /
• 2016

This paper proposes a PWM (Pulse Width Modulation) voltage mode DC-DC step-up converter for portable devices. The converter, which is operated with a 1 MHz switching frequency, is capable of reducing the mounting area of passive devices, such as inductor and capacitor, and is suitable for compact mobile products. This step-up converter consists of a power stage and a control block. The circuit elements of the power stage are an inductor, output capacitor, MOS transistors Meanwhile, control block consist of OPAMP (operational amplifier), BGR (band gap reference), soft-start, hysteresis comparator, and non-overlap driver and some protection circuits (OVP, TSD, UVLO). The hysteresis comparator and non-overlapping drivers reduce the output ripple and the effects of noise to improve safety. The proposed step-up converter was designed and verified in Magnachip/Hynix 0.18um 1-poly, 6-metal CMOS process technology. The output voltage was 5 V with a 3.3 V input voltage, output current of 100 mA, output ripple less than 1% of the output voltage, and a switching frequency of 1 MHz. These designed DC-DC step-up converters could be applied to the Personal Digital Assistants(PDA), cellular Phones, Laptop Computer, etc.