• 한국전자파학회논문지
• /
• 제22권2호
• /
• pp.220-227
• /
• 2011

현대 이동 통신 기술의 급격한 발전과 함께 800 MHz 이상의 주파수 대역에서는 다양한 디지털 변조 방식에 의한 기술이 서비스되고 있다. 그러나 국내에서는 전자기파 방사의 영향에 대한 특별한 검토나 연구가 없이 IEC 61000-4-3에 기반한 방사 내성 시험이 AM 신호로만 수행되고 있으며, 광대역 디지털 변조 신호나 cdmaone(IS-95)나 WCDMA 접속 방식에 의한 PM 신호로는 시험되지 않고 있다. 본 연구는 전자기파 방사 내성 시험의 기술 표준을 검토하여, 국내 전파 환경에 적합한 인가 신호를 분석하고 시험하기 위해 수행되었다. 연구 결과로는 AM 신호보다 PM 신호나 디지털 변조 신호 인가 시, 더 큰 영향을 받는 것으로 확인되었다. 본 연구 결과는 국내 통신 기술의 환경에 맞는 정확하고 합리적인 방사 내성의 평가를 위해서는 단편적인 접근이 아닌 대역폭, 물리 채널, 변조 기술, 출력 전력 및 다중화에 의한 신호 등의 복합적 검토와 심층적 연구가 필요함을 보여준다.

• Journal of Communications and Networks
• /
• 제5권4호
• /
• pp.319-327
• /
• 2003

We consider the problem of low-sampling rate high-resolution channel estimation and timing for digital ultrawideband (UWB) receivers. We extend some of our recent results in sampling of certain classes of parametric non-bandlimited signals and develop a frequency domain method for channel estimation and synchronization in ultra-wideband systems, which uses sub-Nyquist uniform sampling and well-studied computational procedures. In particular, the proposed method can be used for identification of more realistic channel models, where different propagation paths undergo different frequency-selective fading. Moreover, we show that it is possible to obtain high-resolution estimates of all relevant channel parameters by sampling a received signal below the traditional Nyquist rate. Our approach leads to faster acquisition compared to current digital solutions, allows for slower A/D converters, and potentially reduces power consumption of digital UWB receivers significantly.

• ETRI Journal
• /
• 제27권5호
• /
• pp.579-584
• /
• 2005

A CMOS direct-conversion mixer with a single transistor-level topology is proposed in this paper. Since the single transistor-level topology needs smaller supply voltage than the conventional Gilbert-cell topology, the proposed mixer structure is suitable for a low power and highly integrated RF system-on-a-chip (SoC). The proposed direct-conversion mixer is designed for the multi-band ultra-wideband (UWB) system covering from 3 to 7 GHz. The conversion gain and input P1dB of the mixer are about 3 dB and -10 dBm, respectively, with multi-band RF signals. The mixer consumes 4.3 mA under a 1.8 V supply voltage.

• Journal of information and communication convergence engineering
• /
• 제8권2호
• /
• pp.155-158
• /
• 2010

In this article, we proposed a new interference canceller using the adaptive algorithm. We designed constant modulus algorithm-correlation normailized least mean square (CMA-CNLMS) for wireless system. This structure is normalized LMS algorithm using correlation between the desired and input signal for cancelling the interference signals in the wideband code division multiple access (WCDMA) system. We showed that the proposed algorithm could improve the Mean Square Error (MSE) performance of LMS algorithm. MATLAB (Matrix Laboratory) is employed to analyze the proposed algorithm and to compare it with the experimental results. The MSE value of the LMS with mu=0.0001 was measured as - 12.5 dB, and that of the proposed algorithm was -19.5 dB which showed an improvement of 7dB.

• ETRI Journal
• /
• 제35권5호
• /
• pp.757-766
• /
• 2013

This paper deals with the estimation of the time of arrival (TOA) of ultra-wideband signals under IEEE 802.15.4a channel models. The proposed approach is based on a randomness test and consists of determining whether an autoregressive (AR) process modeling an energy frame is random or not by using a distance to measure the randomness. The proposed method uses a threshold that is derived analytically according to a preset false alarm probability. To highlight the effectiveness of the developed approach, simulation setups as well as real data experiments are conducted to assess the performance of the new TOA estimation algorithm. Thereby, the proposed method is compared with the cell averaging constant false alarm rate technique, the threshold comparison algorithm, and the technique based on maximum energy selection with search back. The obtained results are promising, considering both simulations and collected real-life data.

• 말소리와 음성과학
• /
• 제4권3호
• /
• pp.119-125
• /
• 2012

This paper describes a new algorithm for encoding spectral shape and envelope in the generic mode of G.718 super-wide band (SWB). In the G.718 SWB coder, generic mode coding and sinusoidal enhancement are used for the quantization of modified discrete cosine transform (MDCT)-based parameters in the high frequency band. In the generic mode, the high frequency band is divided into sub-bands and for every sub-band the most similar match with the selected similarity criteria is searched from the coded and envelope normalized wideband content. In order to improve the quantization scheme in high frequency region of speech/audio signals, the modified generic mode by the improvement of the generic mode in G.718 SWB is proposed. In the proposed generic mode, perceptual vector quantization of spectral envelopes and the resolution increase for spectral copy are used. The performance of the proposed algorithm is evaluated in terms of objective quality. Experimental results show that the proposed algorithm increases the quality of sounds significantly.

• ETRI Journal
• /
• 제29권2호
• /
• pp.237-239
• /
• 2007

Interference from IEEE 802.11a systems affects ultra-wideband (UWB) systems significantly. In this letter, we suggest a novel narrow-band interference (NBI) suppression technique based on the singular value decomposition (SVD) algorithm in time-hopping pulse amplitude modulation (TH-PAM) UWB systems. The SVD algorithm is used to approximate the interference which then is subtracted from the received signals. In contrast to the conventional notch filter and rake receiver, our method is more effective and the receiver complexity can be greatly reduced.

• ETRI Journal
• /
• 제42권1호
• /
• pp.108-117
• /
• 2020

This study proposes a robust range-only beacon mapping method for registering the locations of range-only beacons automatically. The proposed method deals with the multipath propagation of signals from range-only beacons using the range-only measurement association (RoMA) and an unscented Kalman filter (UKF). The RoMA initially predicts the candidate positions of a range-only beacon. The location of the range-only beacon is then updated using the UKF. With the proposed method, the locations of range-only beacons are accurately estimated in a multipath environment. The proposed method also provides the location uncertainty of each range-only beacon. Simulation results using the model for multipath propagation and experimental results in a real indoor environment verify the performance of the proposed method.

• 전자공학회논문지A
• /
• 제31A권3호
• /
• pp.18-27
• /
• 1994

An 8-bit 2-stage pipelined current mode A/D converter is designed with a new architecture, where the wideband track-and-hold amplifiers which have 2 integrators in parallel sample input signal twice per clock cycle. The conversion speed of the A-D converter is two times faster than that of conventional pipelined method. The converter is designed to be operated at the power supply voltage of 3.3V with the input dynamic range of 0-256$\mu$A. HSPICE simulation results show the performance of up to 55Msamples/s and power consumption of 150mW with the parameters of ISRC $1.5\mu$m BICMOS process. The chip area is 3${\times}4mm^{2}$.

• 한국통신학회논문지
• /
• 제39A권3호
• /
• pp.140-148
• /
• 2014

본 논문은 전자기파 신호 계산에 있어 하이브리드 방식의 기저 함수로써 Gaussian 함수를 제안하고자 한다. 하이브리드 방식은 전반부 시간 및 낮은 주파수 데이터를 이용하여 후반부 시간 및 높은 주파수 데이터를 구하는 방식이다. 시간을 이용한 MOT, 주파수를 이용한 MOM 방식의 장점만을 가져오기 때문에 전자기 분석 데이터를 구하기 위한 시간이 감소되며 오차가 적다는 장점이 있다. 이를 위해서는 기저 함수를 필요로 하며 Hermite, Laguerre를 기저 함수로 사용한 기존의 방법과의 비교를 통해 제안된 방법의 성능을 확인하였다.