• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.293-297
• /
• 2009

In this thesis, design of a VCO(Voltage controlled Oscillator) with a novel tuning mechanism is presented for the Radar system. This circuit, the 9.5 GHz oscillator is designed and implemented by restructuring microstrip resonator to raise Q value and to require a wide frequency tuning range. This product is fabricated on 2.6 Teflon substrate and device is NE722S01. In this paper, The new microstrip resonator VCO is proposed to achieve the characteristic of a wide frequency tuning range. This microstrip resonator VCO shows the phase noise characteristic of -108.3 dBc/Hz at 1 MHz offset from the fundamental frequency, the output power of 5.7 dBm and the second harmonic suppression of -38 dBc for the VCO are obtained. The manufacture VCO shows a frequency tuning range of 193.8 MHz. The proposed micro trip resonator VCO can be used for X-band Radar System with required tuning range.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.21-24
• /
• 2002

This paper presents a fully integrated, wide tuning range differential CMOS voltage-controlled oscillator, tuned by pMOS-varactors. VCO utilizing a novel tuning scheme is reported. Both coarse digital tuning and fine analog tuning are achieved using pMOS-varactors. The VCO were implemented in a 0.18-fm standard CMOS process. The VCO tuned from 1.8㎓ to 2.55㎓ through 2-bit digital and analog input. At 1.8V power supply voltage and a total power dissipation of 8mW, the VCO features a phase noise of -126㏈c/㎐ at 3㎒ frequency offset.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.613-614
• /
• 2008

• ETRI Journal
• /
• 제33권2호
• /
• pp.201-209
• /
• 2011

This paper presents a wide-band fine-resolution digitally controlled oscillator (DCO) with an active inductor using an automatic three-step coarse and gain tuning loop. To control the frequency of the DCO, the transconductance of the active inductor is tuned digitally. To cover the wide tuning range, a three-step coarse tuning scheme is used. In addition, the DCO gain needs to be calibrated digitally to compensate for gain variations. The DCO tuning range is 58% at 2.4 GHz, and the power consumption is 6.6 mW from a 1.2 V supply voltage. An effective frequency resolution is 0.14 kHz. The phase noise of the DCO output at 2.4 GHz is -120.67 dBc/Hz at 1 MHz offset.

• 대한전자공학회논문지SD
• /
• 제47권2호
• /
• pp.87-93
• /
• 2010

이 글은 공정, 전압, 온도 변화를 극복하기 위한 2단계 자동 트랜스컨덕턴스 조절 기능을 가진 저전력, 광대역 전압제어발진기의 설계에 관한 논문이다. 광대역에서 전압제어발진기를 발진시키기 위해, 디지털 자동 트랜스컨덕턴스 조절 루프와 아날로그 자동 진폭조절 루프가 사용되었다. 전압제어발진기의 출력 스윙 크기에 따라 트랜지스터의 바디전압을 조절하는 기능도 저전력 구현을 위해 설계되었다. 소모전류는 1.2 V 공급전압에서 2 mA에서 6 mA까지 1 mA 단위로 조절된다. 전압제어발진기의 튜닝 범위는 2.35 GHz에서 5 GHz까지 2.65 GHz로써 72%이다. 위상잡음은 중심주파수 3.2 GHz를 기준으로 1MHz 떨어진 지점에서 -117 dBc/Hz 이다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.100-103
• /
• 2003

A Ku-band Push-push VCO for low cost applications is proposed. The proposed push-push oscillator achieves a wide tuning range in Ku-band by the collector bias tuning instead of extra varactor diodes. The measurement shows a wide tuning range of 900MHz, fundamental suppression of -30dBc and good phase noise of -115dBc@1MHz offset.

• 대한전자공학회논문지SD
• /
• 제47권8호
• /
• pp.64-72
• /
• 2010

본 논문은 UWB주파수 합성기용 광대역 전압 제어 발진기로 시그마-델타 모듈레이션을 이용하여 미세한 성긴 튜닝을 구현하였다. 제안된 성긴 튜닝 방법은 위상 잡음 성능의 저하 없이 작은 유효 주파수 해상도를 제공한다. 3단계의 성긴 튜닝구조로 전압제어 발진기는 광대역과 미세 튜닝 단계를 동시에 구현한다. 본 전압 제어기를 포함한 주파수 합성기는 0.13 ${\mu}m$ CMOS공정으로 구현되었고, 5.8-6.8 GHz의 대역에 3.9 kHz의 유효 주파수 해상도를 갖는다. 측정된 위상 잡음은 1 MHz 오프셋에서 -108 dBc/Hz이고, 5.9 mW 전력 소모로 16.8 %의 튜닝 범위를 갖으며, 튜닝 범위를 갖는 Figure-of-merit(FoM)은 -181.58 dBc/Hz이다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권3호
• /
• pp.198-206
• /
• 2013

This paper presents a wide band, fine-resolution digitally controlled oscillator (DCO) with an on-chip 3-D solenoid inductor using the 0.13 ${\mu}m$ digital CMOS process. The on-chip solenoid inductor is vertically constructed by using Metal and Via layers with a horizontal scalability. Compared to a spiral inductor, it has the advantage of occupying a small area and this is due to its 3-D structure. To control the frequency of the DCO, active capacitor and active inductor are tuned digitally. To cover the wide tuning range, a three-step coarse tuning scheme is used. In addition, the DCO gain needs to be calibrated digitally to compensate for gain variations. The DCO with solenoid inductor is fabricated in 0.13 ${\mu}m$ process and the die area of the solenoid inductor is 0.013 $mm^2$. The DCO tuning range is about 54 % at 4.1 GHz, and the power consumption is 6.6 mW from a 1.2 V supply voltage. An effective frequency resolution is 0.14 kHz. The measured phase noise of the DCO output at 5.195 GHz is -110.61 dBc/Hz at 1 MHz offset.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권4호
• /
• pp.281-285
• /
• 2006

In order to widen the tuning range, capacitive degeneration is applied to fully CMOS LC VCOs. Small signal analysis shows that the fixed MOSFET capacitance seen by the LC tank is smaller than that of the traditional LC VCO, resulting in significant extension in the tuning range. This improvement in the tuning range has been verified through measurement of a 10-GHz LC VCO fabricated by $0.18{\mu}m$ CMOS process. The measured tuning range is from 9.8-GHz to 12-GHz, which is better than those of the reported CMOS LC VCOs in 10-GHz band. The measured phase noise is - 103dBc/Hz at 1MHz offset.

• 제어로봇시스템학회논문지
• /
• 제12권12호
• /
• pp.1173-1177
• /
• 2006

Using an inner P controller, a tuning rule useful for processes with wide ratios of time delay over time constant is proposed. Internal model control method and pole assignment method are utilized. It can be used for processes with wide range of the ratio of time delay to time constant without incovenience to choose different tuning rules.