• 제목/요약/키워드: wide bandwidth

검색결과 773건 처리시간 0.023초

IEEE 802.17 레질런트 패킷링을 위한 대역폭 재분배 기반 공정성 제어 방식 (Bandwidth Redistribution Based Fairness Control Method for the IEEE 802.17 Resilient Packet Ring)

  • 김태준;김황래
    • 한국멀티미디어학회논문지
    • /
    • 제9권7호
    • /
    • pp.844-853
    • /
    • 2006
  • 미래 근거리망, 도시망 및 광역망을 위해 최근에 표준화된 IEEE 802.17 레질런트 패킷링의 공정성 제어 방식은 비대칭 과부하에서 지연지터 특성을 악화시키고 대역폭 손실까지 초래하는 문제점을 갖고 이다. 본 논문은 이러한 문제를 해결하기 위해 기존 방식과 호환성을 유지하는 대역폭 재분배 기반 공정성 제어 방식을 제안한다. 제안된 방식에서 체증노드는 상단노드들의 병목링크 사용을 통제한 결과 얻어지는 병목링크의 가용 대역폭을 측정하고 대역폭이 더 필요한 상단노드의 수를 추정하여 최적 공정속도를 계산하며, 계산된 공정속도를 상단노드로 통보하여 가용 대역폭을 재분배 한다. 성능평가 결과 단 2회의 재분배 시도로 가용 대역폭의 95%를 공평하게 분배하였다.

  • PDF

루프 대역폭 조절기를 이용한 빠른 위상 고정 시간을 갖는 이중 루프 위상고정루프 (A Fast Locking Dual-Loop PLL with Adaptive Bandwidth Scheme)

  • 송윤귀;최영식
    • 대한전자공학회논문지SD
    • /
    • 제45권5호
    • /
    • pp.65-70
    • /
    • 2008
  • 본 논문에서는 루프 대역폭을 조절하여 빠른 위상 고정 시간을 갖는 새로운 구조의 이중 루프 위상고정루프를 제안하였다. 위상고정루프가 out-lock 상태일 때는 채널 간격의 1/10보다 더 큰 대역폭을 갖도록 하였으며, in-lock 부근에서는 채널 간격의 1/10 보다 더 작은 좁은 대역폭을 갖도록 하였다. 제안된 위상고정루프는 표준 CMOS $0.35{\mu}m$ 공정으로 HSPICE를 이용하여 설계 하였다. 시뮬레이션 결과 PLL의 대역폭을 200KHz 채널 간격 보다 14배 크게 하여 80MHz의 주파수를 변화시키는데 $50{\mu}s$의 빠른 위상고정 시간을 갖는 것으로 나타났다.

유럽향 2세대 Wide TV용 PALplus 디지털 디코더 시스템의 개발 (Development of PALplus Digital Decoder System for the European 2nd Generation Wide TV)

  • 김정훈;이민승;정태홍;송동일;이명호
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 1997년도 학술대회
    • /
    • pp.101-106
    • /
    • 1997
  • Palplus system is a new European 16:9 wide screen TV format which has a full compatibility with standard PAL and the system has a advantage of improving picture quality by the reduction of cross color and cross luminance as well as making use of the full horizontal luminance bandwidth of the PAL system. We implemented European 16:9 PALplus Digital decoder(625/50/2:1) system using SVP(Serial Video Processor) IC and discrete helper demodulator.

  • PDF

보드 설계에 따른 Adaptive Bandwidth PLL의 성능 분석 (Performance Analysis of Adaptive Bandwidth PLL According to Board Design)

  • 손영상;위재경
    • 대한전자공학회논문지SD
    • /
    • 제45권4호
    • /
    • pp.146-153
    • /
    • 2008
  • High speed serial link에 적합한 clock multiphase generator용 integrated phase-locked loop (PLL)을 설계하였다. 설계된 PLL은 programmable current mirror를 사용하여 동작 범위 안에서 동일한 loop bandwidth와 damping factor를 가진다. 또한 설계한 PLL 회로 netlists를 가지고 HSPICE 시뮬레이션을 통해 close-loop transfer function과 VCO의 phase noise transfer function을 구하였다. Board 위 칩의 자체 임피던스는 decoupling capacitor의 크기와 위치에 따라 계산된다. 세부적으로, close-loop transfer function에서 gain의 최대값과 VCO noise transfer function에서 gain의 최대값 사이의 주파수범위에서 decoupling capacitor의 크기와 위치에 따른 보드 위 칩의 자체 임피던스를 구하였다. 이를 바탕으로 보드에서의 decoupling capacitor의 크기와 위치가 PLL의 jitter에 어떠한 영향을 미치는지 분석하였다. 설계된 PLL은 1.8V의 동작 전압에서 400MHz에서 2GH의 wide operation range를 가지며 $0.18-{\mu}m$ EMOS공정으로 설계하였다. Reference clock은 100MHz이며 전체 PLL power consumption은 1.2GHz에서 17.28 mW이다.

LMDS대역을 위한 광대역 마이크로스트립 패치 안테나 설계 (Wide-Band Microstrip Patch Antenna Designs For LMDS Band)

  • 이현진;김태홍;임영석
    • 대한전자공학회논문지TC
    • /
    • 제37권10호
    • /
    • pp.37-42
    • /
    • 2000
  • 마이크로스트립 패치를 이용하여 안테나의 대역을 증가시키는 방법이 꾸준히 연구되고 있다. 본 연구에서 구형 패치를 이용하여 LMDS용 안테나를 설계하기 위하여 패치의 구조를 변형시킨 형태로 구형 패치 외부 에 밴드를 설치하여 프린징 효과에 의한 전자계의 외부 발산을 최소화하였으며, 이로 인한 안테나 효율의 증가와 원하는 대역의 안테나의 설계 파라미터 값과 실제 시뮬레이션 결과와의 차를 줄일 수 있는 장점을 갖고 있다. 또한 종래의 적층 패치 안테나구조에 비하여 본 연구에서 제시한 외부 밴드를 갖은 구조의 대역폭이 더 넓어짐을 확인 할 수 있었다.

  • PDF

하모닉 구조 확장과 NMF 기반의 인공 대역 확장 기술 (Artificial Bandwidth Extension Based on Harmonic Structure Extension and NMF)

  • 김기준;박호종
    • 전자공학회논문지
    • /
    • 제50권12호
    • /
    • pp.197-204
    • /
    • 2013
  • 본 논문에서는 주파수 영역에서 협대역 신호를 광대역으로 확장하는 새로운 인공 대역 확장 기술을 제안한다. 제안한 기술은 협대역 신호를 여기 신호와 스펙트럼 포락선 성분으로 분리하고, 주파수 영역에서 각각 독립적인 방법으로 확장한다. 여기 신호는 저대역의 하모닉 구조가 고대역에서 유지되도록 확장하고, 스펙트럼 포락선은 부대역별 에너지를 기반으로 NMF방법으로 확장한다. 마지막으로 시간 축에서 프레임 사이의 상관관계를 기반으로 스펙트럼 위상을 결정하여 최종 광대역 신호를 생성한다. 주관적 청취 평가를 통하여 제안한 방법으로 대역 확장된 신호가 원 협대역 신호보다 음질이 향상된 것을 확인하였다.

X-선 미소열량계 신호 검출을 위한 광대역 SQUID 전류증폭기와 조절 회로 (Wide-bandwidth SQUID Current Amplifier and Control Electronics for X-ray Microcalorimeter)

  • 김진목;이용호;권혁찬;김기웅;박용기
    • Progress in Superconductivity
    • /
    • 제5권1호
    • /
    • pp.31-37
    • /
    • 2003
  • Wide-bandwidth SQUID current amplifier and its control electronics have been constructed for detecting pulse outputs of a superconducting microcalorimeter. The current amplifier made of a double relaxation oscillation SQUID (DROS) has a bandwidth of 1.2 MHz and typical white noise level of about 6 pA/(equation omitted) Hz. To increase the dynamic range of the current amplifier, the flux-locked loop (FLL) has additional circuits to reset the integrator and to count reset numbers which present the number of passed flux quanta. In this system, dynamic range covers from -65 mA to +65 mA. SQUID electronics are controlled by software to get the optimum FLL condition, and to control the current to bias the transition edge sensor (TES). The electronics are shielded from the outside electromagnetic noises by using an aluminum case of 66 mm ${\times}$ 25 mm ${\times}$ 100 mm, and consist of 2 separate printed-circuit-boards for the current amplifier and the control electronics, respectively. The SQUID current amplifier and its control electronics will be used in TESs for detecting photons such as UV and X-ray with high energy resolution.

  • PDF

A CMOS 5-bit 5GSample/Sec Analog-to-digital Converter in 0.13um CMOS

  • Wang, I-Hsin;Liu, Shen-Iuan
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제7권1호
    • /
    • pp.28-35
    • /
    • 2007
  • This paper presents a high-speed flash analog-to-digital converter (ADC) for ultra wide band (UWB) receivers. In this flash ADC, the interpolating technique is adopted to reduce the number of the amplifiers and a linear and wide-bandwidth interpolating amplifier is presented. For this ADC, the transistor size for the cascaded stages is inversely scaled to improve the trade-off in bandwidth and power consumption. The active inductor peaking technique is also employed in the pre-amplifiers of comparators and the track-and-hold circuit to enhance the bandwidth. Furthermore, a digital-to-analog converter (DAC) is embedded for the sake of measurements. This chip has been fabricated in $0.13{\mu}m$ 1P8M CMOS process and the total power consumption is 113mW with 1V supply voltage. The ADC achieves 4-bit effective number of bits (ENOB) for input signal of 200MHz at 5-GSample/sec.

Wide band prototype feedhorn design for ASTE focal plane array

  • Lee, Bangwon;Gonzales, Alvaro;Lee, Jung-won
    • 천문학회보
    • /
    • 제41권2호
    • /
    • pp.66.2-66.2
    • /
    • 2016
  • KASI and NAOJ are making collaborating efforts to implement faster mapping capability into the new 275-500 GHz Atacama Submillimeter Telescope Experiment focal plane array (FPA). Feed horn antenna is one of critical parts of the FPA. Required fractional bandwidth is almost 60 % while that of traditional conical horn is less than 50 %. Therefore, to achieve this wideband performance, we adopted a horn of which the corrugation depths have a longitudinal profile. A profiled horn has features not only of wide bandwidth but also of shorter length compared to a linear-tapered corrugated horn, and lower cost fabrication with less error can be feasible. In our design process the flare region is represented by a cubic splined curve with several parameters. Parameters of the flare region and each dimension of the throat region are optimized by a differential evolution algorithm to keep >20 dB return loss and >30 dB maximum cross-polarization level over the operation bandwidth. To evaluate RF performance of the horn generated by the optimizer, we used a commercial mode matching software, WASP-NET. Also, Gaussian beam (GB) masks to far fields were applied to give better GB behavior over frequencies. The optimized design shows >23 dB return loss and >33 dB maximum cross-polarization level over the whole band. Gaussicity of the horn is over 96.6 %. The length of the horn is 12.5 mm which is just 57 % of the ALMA band 8 feed horn (21.96 mm).

  • PDF

UWB(Ultra-Wide Bandwidth) 통신 시스템에서 협대역 간섭 잡음 해석 (The Analysis of the Effect of Narrowband Interference on UWB communication system)

  • 박장우
    • 한국정보통신학회논문지
    • /
    • 제7권6호
    • /
    • pp.1153-1160
    • /
    • 2003
  • 이 논문에서 협대역 간섭 잡음이 존재하는 환경에서 UWB(Ultra-Wide Bandwidth) 통신 시스템의 성능을 분석한다. UWB 통신 시스템은 일반적으로 사용되는 펄스시간위치변조 (Pulse Position Modulation)를 사용하며, 이때 전송 펄스는 가우시안 모노사이클이다. 또한, 다중접근간섭 (Multiple Access Interference)의 영향도 고려한다. 협대역 간섭은 특정 대역에서 일정한 전력 스펙트럼을 갖는 평균이 영인 랜덤 과정으로 모델링 하였다. 이 해석을 통하여, PPM 변조시 사용되는 시간 편이를 적절히 조절하고, 수신기에서 template 신호를 조정함으로써 협대역 간섭을 효과적으로 제거할 수 있음을 알 수 있다.