• Journal of electromagnetic engineering and science
• /
• v.9 no.3
• /
• pp.152-158
• /
• 2009

We have developed a novel digital feedback predistortion(DFBPD) linearization based on RF feedback PD for the wide bandwidth modulated signals. The wideband PD operation is carried out by combining the DFBPD and memory lookup table(LUT). To experimentally demonstrate the linearization performance of the proposed PD technique for wideband signal, a class-AB amplifier using an LDMOSFET MRF6S23140 with 140-W peak envelope power is employed at 2.345 GHz. For a forward-link 2FA wideband code-division multiple-access signal with 10 MHz carrier spacing, the proposed DFBPD with memory LUT delivers the adjacent channel leakage ratio at an 10 MHz offset of -56.8 dBc, while those of the amplifier with and without DFBPD are -43.2 dBc and -41.9 dBc, respectively, at an average output power of 40 dBm. The experimental result shows that the new DFBPD with memory LUT provides a good linearization performance for the signal with wide bandwidth.

• The Journal of the Korea Contents Association
• /
• v.5 no.3
• /
• pp.175-181
• /
• 2005

Recent measurements of local-area and wide-area traffic have shown that network traffic exhibits at a wide range of scales-Self-similarity. Self-similarity is expressed by long term dependency, this is contradictory concept with Poisson model that have relativity short term dependency. Therefore, first of all for design and dimensioning of next generation communication network, traffic model that are reflected burstness and self-similarity is required. Here self-similarity can be characterized by Hurst parameter. In this paper, when different many data traffic being integrated under various environments is arrived to communication network, Hurst Parameter's change is analyzed and compared with simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.362-367
• /
• 2005

Control network adopted in the national power-plant or manufactory are mostly vendor-dependent products, which have their own special specification, components and individual communication methods. These systems not only raise installation cost, but also bring many difficulties to maintenance and extension. To overcome these problems, this paper introduces a development and application case of a new "PC/Ethernet-based fieldbus" architecture and protocol to be used in mid-level fieldbus. The designed system has a basic idea of "3 Layers fieldbus over Standard-LAN" and implemented on PCs. PC gives user friendly environment. By using an open standard Ethernet in layer 1,2, the system has low cost, wide communication bandwidth and high compatibility. Layer 3 protocol designed for large realtime data communication makes user bypass TCP/IP layer and gives user direct access to the Ethernet. This new protocol eliminates potential collision of Ethernet, and transmits large periodic/non-periodic control data by using long-frame/wide-bandwidth of Ethernet effectively, and offers simple API-Services to the upper layer. Since the system have installed in H-power plant simulator and U-nuclear power plant simulator in Korea, it have been proved to be efficient and stable without any trouble in realtime communication service for full-scope plant simulator that has a lot of control elements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.104-108
• /
• 2006

There are range and azimuth direction resolution of synthetic aperture radar on the aircraft or satellite. Wide bandwidth chirp pulse generation technology is prerequisite for SAR image with fine resolution. There are two kinds of digital chirp pulse generation technology as arbitrary waveform generator(AWG) and direct digital synthesizer(DDS). In this paper, we design and implement a digital chirp pulse generator to generate 300MHz wide bandwidth linear FM chirp pulse for the fine resolution image with direct digital synthesizer. Implemented chirp pulse generator can be useful for the SAR sensors to make 50cm range resolution image.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.625-632
• /
• 2002

In this paper, a wide band modified inverted-F type antenna printed on a high dielectric ceramic material is designed and fabricated. This antenna is designed to have optimum antenna characteristics analyzing the effects of design parameters such as printed antenna pattern, ceramic dielectric material dimension and dielectric constant on antenna characteristics using the commercial simulation tool HFSS. The fabricated antenna's width, length and height are 8 mm, 8 mm and 3 mm, respectively. Measurement results show that it has -10 dB bandwidth of 270 MHz which satisfies the IMT-2000 bandwidth required for handset and that its maximum radiation gain is 2 dBi.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.50-57
• /
• 2001

This paper describes a design for the circularly polarized microstrip EMC cross dipole array antenna with the wide bandwidth. To realize the characteristics of wide bandwidth and circular polarization, the electromagnetic-coupled cross dipole element is proposed. The optimum design parameters of a circularly polarized EMC cross dipole element are calculated by the FDTD and the Ensemble. To obtain the uniform aperture illumination of electric field in an array, offset technique that the cross dipole elements are alternatively arranged on center of the microstrip feed line is adopted. In 20-element array design, the calculated axial ratio and gain are about 0.1dB and 9.9 dBi at 12 GHz, respectively, The frequency characteristics of a fabricated 20-element array antenna are measured. The calculated results agree well with the measured ones.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.4
• /
• pp.257-265
• /
• 2021

Many studies have been performed to predict a reliable and accurate stress-range distribution and fatigue damage regarding the Gaussian wide-band stress response due to multi-peak waves and multiple dynamic loads. So far, most of the approximation models provide slightly inaccurate results in comparison with the rain-flow counting method as an exact solution. A step-by-step study was carried out to develop new approximate spectral moments that are close to the rain-flow counting moment, which can be used for the development of a fatigue damage model. Using the special parameters and bandwidth parameters, four kinds of parameter-based combinations were constructed and estimated using the R-squared values from regression analysis. Based on the results, four candidate empirical formulas were determined and compared with the rain-flow counting moment, probability density function, and root mean square (RMS) value for relative distance. The new approximate spectral moments were finally decided through comparison studies of eight response spectra. The new spectral moments presented in this study could play an important role in improving the accuracy of fatigue damage model development. The present study shows that the new approximate moment is a very important variable for the enhancement of Gaussian wide-band fatigue damage assessment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.23-28
• /
• 2009

The general six-port phase correlator is comprised of a Wilkinson power divider and three $90^{\circ}$ hybrid coupler, which has less than 10 % bandwidth. In this paper, the six-port phase correlator using two section power divider has 33 % bandwidth and external matching $90^{\circ}$ hybrid coupler with 15 % bandwidth was designed at the center frequency of 2.5 GHz. The simulation result by ADS2003A indicates that RF port and LO port of proposed six-port phase correlator got wide frequency bandwidth of 14 % for VSWR of 1.5. The fabricated six-port phase correlator has a bandwidth of 12 % similar to the simulation result. The maximum phase discrepancy and insertion loss are $6^{\circ}$ and 2.5 dB over a bandwidth, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.3
• /
• pp.73-80
• /
• 2010

The advancement of communication and networking technologies has enabled e-science and commercial application that often require the transport of large volume of data over wide-area network. Schedulable high-bandwidth low-latency connectivity is required to transport the large volume of data. But the public Internet does not provide predictable service performance. Especially, if data providers and users are far away, dedicated bandwidth channels are needed to support remote process efficiently. Currently several network research projects are in progress to develop dedicated connectionsy sA bandwidth scheduler computes an user requested path based on network topology information and link bandwidth allocationsy In this paper, we have proposed an efficient algorithm for finding the earliest time interval when minimum bandwidth and duration are giveny Our algorithm is experimentally compared with the known algorithm.

• The Journal of Korea Robotics Society
• /
• v.12 no.3
• /
• pp.350-355
• /
• 2017

UWB (Ultra Wide Band) refers to a system with a bandwidth of over 500 MHz or a bandwidth of 20% of the center frequency. It is robust against channel fading and has a wide signal bandwidth. Using the IR-UWB based ranging system, it is possible to obtain decimeter-level ranging accuracy. Furthermore, IR-UWB system enables acquisition over glass or cement with high resolution. In recent years, IR-UWB-based ranging chipsets have become cheap and popular, and it has become possible to implement positioning systems of several tens of centimeters. The system can be configured as one-way ranging (OWR) positioning system for fast ranging and TWR (two-way ranging) positioning system for cheap and robust ranging. On the other hand, the ranging based positioning system has a limitation on the number of terminals for localization because it takes time to perform a communication procedure to perform ranging. To overcome this problem, code multiplexing and channel multiplexing are performed. However, errors occur in measurement due to interference between channels and code, multipath, and so on. The measurement filtering is used to reduce the measurement error, but more fundamentally, techniques for removing these measurements should be studied. First, the TWR based positioning was analyzed from a stochastic point of view and the effects of outlier measurements were summarized. The positioning algorithm for analytically identifying and removing single outlier is summarized and extended to three dimensions. Through the simulation, we have verified the algorithm to detect and remove single outliers.