• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.813-824
• /
• 2005

This study was carried out to evaluate the quality characteristics of the spicy fermented pork with traditional seasonings. The samples, outside muscle of pork ham, were cut to cube($7{\time}10{\time}2$cm3) and five traditional seasonings such as soy sauce(T1), Kimchi sauce(T2), pickled shrimps sauce(T3), onion sauce (T4) were seasoned by the proportions of meat to seasonings(1:1), respectively. The seasoned samples were fermented at $1{\pm}1^{\circ}C$ for 10 days. And then, the spicy fermented meat was atmosphere packaged and stored at $1{\pm}1^{\circ}C$ for up to 28 days. The pH level of fermented pork has been decreased at the end of the storage compared to the early storage days. The pH level of T3 was higher than that of other treatments during the whole storage days. The salinity and saccharinity of treatments were increased during the storage periods in T1, T3 and T4. TBARS in all treatments was significantly high at the later days of the storage compared to the early days of the storage. VBN was increased until the 21 days of storage and decreased rapidly since then. There were no significant differences in WHC among the all treatments. The shear force was increased with storage in all treatments group. The L* values of surface meat showed a tendency of increasing value along the storage days and the a*, b* values showed a tendency of decreasing value. The number of total bacteria and lactic acid bacteria were tended to increase during storage, while E. coli was decreased as storage period extended. In the results of sensory evaluation, T1 had the highest score in overall acceptability.

• Journal of the Korean Society of Food Culture
• /
• v.20 no.5
• /
• pp.574-583
• /
• 2005

To investigate the importance and practice of well-being related dietary life pattern such as purchasing food materials, food habits and eating out, a survey was conducted by questionnaire and 5-point Likert score in Seoul and Gyeonggi-Do, September, 2004 and April, 2005. The responses of 732 housewives who were over 40 years were analyzed by SPSS package program. The results were as follows. Most of them were 40-49 years(74.4%), graduated highschool (66.6%) and their family type was nuclear family type(81.4%). Almost half of them had full-time job (37.1%) and part time job (15.4%). The average importance score of 'food habits', 'purchasing food materials' and 'eating out' were $4.15{\pm}0.91,\;4.06{\pm}0.96\;and\;3.25{\pm}1.01$ respectively. But the average practice score of 'food habits' was greater($3.58{\pm}1.06$) than 'purchasing food materials ($3.19{\pm}1.19$)' and 'eating out($2.54{\pm}1.05$)'. Among 5 types of 'food habits', the type of 'cut down on eating fast food' had the greatest score of importances ($4.31{\pm}0.97$) but the difference between importance and practice was greatest(0.94). Also 'consume home-made food rather than processed or ready to food' showed great scores in importance ($4.28{\pm}0.87$) and practice($3.87{\pm}1.04$). 'Consume fruits and vegetables rather than meats' and 'avoid heavy use of oils' had the importance score of $4.04{\sim}4.19$. But the practice score of 'avoid heavy use of oils' was the lowest($3.39{\pm}0.97$). Among four types of purchasing of food materials, 'purchase domestic agricultural food' was greatest($4.37{\pm}0.78$) and 'don't purchase genetically modified food' 'purchase organic food' and 'purchase whole grain products' were also great ($3.92{\sim}3.99$). But the practice score of 'purchase organic/low chemical foods($2.77{\pm}0.98$)' and 'don't purchase genetically modified food($2.99{\pm}1.41$)' were lowest. 'Go to well being restaurant' in three types of 'eating out' showed greatest in importance($3.35{\pm}0.96$) but the practice score($2.47{\pm}0.10$) was lower than the importance score. Also 'choose menu with comparing calories' had the lower score in practice($2.45{\pm}1.06$) rather than importance score($3.22{\pm}1.03$). In regarding to 'food habits', the importance score were significantly affected by type of food expense (p<0.05) and health status (p<0.05). The importance score of 'purchase food materials' were significantly affected by the type of food expense (p<0.001), type of residence(p<0.05), and self assessment of weight(p<0.05). Monthly income, especially more 400 million won, was the commonly significant effector in practice score of 'purchase food materials' and 'eating out'.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.3
• /
• pp.407-417
• /
• 1999

Objective: Mammalian follicle cells are the most important somatic cells which help oocytes grow, mature and ovulate and thus are believed to provide oocytes with various functional and structural components. In the present study we have examined whether cumulus or granulosa cells might playa role in establishing the plasma membrane structure of mouse oocytes during meiotic maturation. Design: In particular the differential resistances of mouse oocytes against chymotrypsin treatment were examined following culture with or without cumulus or granulosa cells, or in these cell-conditioned media. Results: When mouse denuded oocytes, freed from their surrounding cumulus cells, were cultured in vitro for $17{\sim}18hr$ and then treated with 1% chymotrypsin, half of the oocytes underwent degeneration within 37.5 min ($t_{50}=37.5{\pm}7.5min$) after the treatment. In contrast cumulus-enclosed oocytes showed $t_{50}=207.0$. Similarly, when oocytes were co-cultured with cumulus cells which were not associated with the oocytes but present in the same medium, the $t_{50}$ of co-cultured oocytes was $177.5{\pm}13.1min$. Furthermore, when oocytes were cultured in the cumulus cell-conditioned medium, $t_{50}$ of these oocytes was $190.0{\pm}10.8min$ whereas $t_{50}$ of the oocytes cultured in M16 alone was $25.5{\pm}2.9min$. Granulosa cell-conditioned medium also increased the resistance of oocytes against chymotrypsin treatment such that $t_{50}$ of oocytes cultured in granulosa cell-conditioned medium was $152.5{\pm}19.0min$ while that of oocytes cultured in M16 alone was $70.0{\pm}8.2min$. To see what molecular components of follicle cell-conditioned medium are involved in the above effects, the granulosa cell-conditioned medium was separated into two fractions by using Microcon-10 membrane filter having a 10 kDa cut-off range. When denuded oocytes were cultured in medium containing the retentate, $t_{50}$ of the oocytes was $70.0{\pm}10.5min$. In contrast, $t_{50}$ of the denuded oocytes cultured in medium containing the filtrate was $142.0{\pm}26.5min$. $T_{50}$ of denuded oocytes cultured in medium containing both retentate and filtrate was $188.0{\pm}13.6min$. However, $t_{50}$ of denuded oocytes cultured in M16 alone was $70.0{\pm}11.0min$ and that of oocytes cultured in whole granulosa cell-conditioned medium was $156.0{\pm}27.9min$. When surface membrane proteins of oocytes were electrophoretically analyzed, no difference was found between the protein profiles of oocytes cultured in M16 alone and of those cultured in the filtrate. Conclusions: Based upon these results, it is concluded that mouse follicle cells secrete a factor(s) which enhance the resistance of mouse oocytes against a proteolytic enzyme treatment. The factor appears to be a small molecules having a molecular weight less than 10 kDa.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.5 s.21
• /
• pp.183-192
• /
• 2004

Even in Korea the number of steel structure buildings that allow internal space and easy change of their layouts in accordance with the purpose of buildings and box-type steel bridges constructed with thick plates with thickness in a rage just from a few $\beta$AE to \$100\beta$AE is increasing these days and therefore, domestic fabrication and processing technology of members for steel structures is being improved at a pace faster than in the past to meet the growing requirements of consumers for high reliability on quality control on the related steel structures. However, most domestic fabricators os steel structures who are turning out their steel products in accordance with the designs prepared by engineering companies in their respective works for the sake of cost cut more than anything else, hesitating to introduce any advanced new technology into themselves. In the case of the steel structure design application for small and mid-size buildings in particular, it is quite meaningful not only for those who are involved in steel structure business, but also for the people working at construction work fields to review the result of the study on the connections of steel structure members deigned to obtain superb quality of steel structures within short period for steel fabrication and erection at fields in economical ways, as there is a glowing tendency seeking standardization of connection of steel structure members as well as whole structure together with the development on design of construction system of buildings including their exterior and interior decoration materials, manufacture of the related members and fabrication technique structure. This paper has been prepared with the aim to review the peculiar characteristics of buildings constructed with the main frames of steel structures and actual cases of the change made ing the connections between steel structure columns and between columns and girder members in order to reduce the work period necessary for fabrication and erection of steel structures at the maximum as well as the some examples of steel structures fabricated through automatic welding by robots for box-type columns in addition to the description of the problems found in the course of fabricating those steel structures, suggesting possible counter-measures to solve them.

• Radiation Oncology Journal
• /
• v.22 no.4
• /
• pp.288-297
• /
• 2004

Puporse: The aims of this study were to evaluate the change of $[^18F]fluoromisonidazole$($[^18F]FMISO$) uptake in C3H mouse squamous cell carcinoma-VII (SCC-VII) treated with mild hyperthermia ($42^{circ}C$) and nicotinamide and to assess the biodistribution of the markers in normal tissues under similar conditions. Methods and Materials: $[^18F]FMISO$ was producedby our hospital. Female C3H mice with a C3H SCC-VII tumor grown on their extremities were used. Tumors were size matched. Non-anaesthetized, tumor-bearing mice underwent control or mild hyperthermia at $42^{circ}C$ for 60 min with nicotinamide (50 mg/kg i.p. injected) and were examined by gamma counter, autoradiography and animal PET scan 3 hours after tracer i.v. injected with breathing room air, The biodistribution of these agents were obtained at 3 h after $[^18F]FMISO$ injection. Blood, tumor, muscle, heart, lung, liver, kidney, brain, bone, spleen, and intestine were removed, counted for radioactivity and weighed. The tumor and liver were frozen and cut with a cryomicrotome into 10- um sections. The spatial distribution of radioactivity from the tissue sections was determined with digital autoradiography. Results: The mild hyperthermia with nicotinamide treatment had only slight effects on the biodistribution of either marker in normal tissues. We observed that the whole tumor radioactivity uptake ratios were higher in the control mice than in the mild hyperthermia with nicotinamide treated mice for $[^18F]FMISO$ ($1.56{\pm}1.03$ vs. $0.67{\pm}0.30$; p=0.063). In addition, autoradiography and animal PET scan demonstrated that the area and intensity of $[^18F]FMISO$ uptake was significantly decreased. Conclusion: Mild hyperthermla and nicotinamide significantly improved tumor hypoxia using $[^18F]FMISO$ and this uptake reflected tumor hypoxic status.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.3
• /
• pp.154-201
• /
• 2016

During the Incipient and Early Silla phases, which witnessed the establishment and development of the ancient Silla state, the Wolseong North Burial Ground functioned as not only the central burial ground in the Gyeongju region of the capital of Silla but also as the central burial ground of the whole Silla state. Wolseong North Burial Ground is where transformations in Silla funerary architecture first occurred. As such, an empirical study of the tombs constructed at this burial ground can be regarded as a starting point from which an understanding of the development of the tomb culture of the Silla state may be achieved. This paper therefore aims to examine the changing nature of the tomb culture of the Early Silla phase through the burial data of Wolseong North Burial Ground and the Gyeongju region. Wooden chamber tombs were constructed from the late phase of Saroguk. At Wolseong North Burial Ground, which eventually developed into the central burial ground of the Gyeongju region, wooden chamber tombs embellished with stone packing emerged during the Incipient Silla phase; wooden chamber tombs with stone mounds, on the other hand, first appeared in the Early Silla phase and eventually became established as the central tomb type. A key difference between the wooden chamber tomb embellished with stone packing and the wooden chamber tomb with stone mound is that, in the case of the latter, stones were packed not only around sides of the wooden structure that acted as the burial chamber but also on top of this structure. The addition of a high earthen mound surrounded by protective ring of stones is another distinctive feature of the latter, presenting a contrast to the low mound of the former. During the Early Silla phase, two types of wooden chamber tombs with stone mounds were constructed at Wolseong North Burial Ground: those with burial chambers located above ground and those with subterranean burial chambers. Also constructed during this phase were the wooden chamber tomb embellished with packed stones, the wooden chamber tomb embellished with packed clay, simple earth cut burials, which had been used since the Incipient Silla phase, as well as the stone-lined burials with vertical entrance which first appeared in the Early Silla phase. However, of these different types of burials, it was only the wooden chamber tomb with stone mound that was covered with a 'high mound.' Differentiation between the different tomb types can also be observed in terms of location, type of burial chamber used, construction method, and tomb size. It is therefore possible to surmise that stratification between the different tomb types, which first emerged in the Incipient Silla phase, became intensified during the Early Silla phase.

• Korean Journal of Heritage: History & Science
• /
• v.36
• /
• pp.5-38
• /
• 2003

The history of Baekje Kingdom, one of the Three kingdoms, is divided into three periods to the change of sociopolitical center, including its capital as follows: Hanseong Period (18 BC ~ AD 475), Ungjin Period (AD 475~538), and Sabi Period (AD 538~660). Though the Hanseong Period of Baekje Kingdom covers more than two thirds of the whole history of Baekje Kingdom (493 years), history and archaeological culture of the Hanseong Period is still unclear and even ambiguous comparing to the Ungjin and Sabi periods. Most of all, it is because of quite limited historical records and archaeological data available. In addition, negative attitude of the Korean academic circles to the early records of Samguksaki(三國史記) has been a critical obstacle to the study of early history of the Three kingdoms, including the Hanseong Period of Baekje kingdom. Author, who has attempted to combine historical records and archaeological data in order to reconstruct the history and archaeological culture of the early Baekje, specifically the Hanseong Period, has held positive attitude to the early records of the Samguksaki as far as possible. He(Author) came to realize that comprehensive understanding of Mahan (馬韓) society, one of the Three Han (三韓) Society was more than essential in the study of Baekje. According to historical records and archaeological data, Mahan Society represented by Mojiguk(目支國) ruled by King Jin(辰王) has been located in the middle and/or southwestern parts of the Korean peninsula from the 3rd~2nd century BC through the end of the 5th century or early 6th century AD. Mahan already occupied central portion of the Korean Peninsula, including the Han River Valley when King Onjo(溫祖王) first set up the capital of Baekje Kingdom at Wiryeseong (慰 禮城) considered to be modern Jungrang~Songpa-gu area of Han River Valley. From the beginning of the Baekje history, there had been quite close interrelationships between Baekje and Mahan, and the interrelationships had lasted for around 500 years. In other words, it is impossible to attempt to understand and study Hanseong period of Baekje, without considering the historical and archaeological identity of Mahan. According to the Samguksaki, Baekje moved its capital three times during the Hanseong Period (18 BC ~ AD 475) within the Han River Valley as follows: Wiryeseong at Jungrang-gu area of the Han River (河北慰禮城, 18 ~ 5 BC), Wiryeseong at Songpa-gu area of the Han River(河南慰禮城, 5 BC ~ AD 371), Hansan at Iseongsan fortress site(Historical site No. 422, 漢山, AD 371~391), and Hanseong at Chungung-dong of Hanam city(漢城, AD 391~475). Before 1990s, archaeological data of the Hanseong Period was quite limited, and archaeological culture of Mahan was not well defined. Only a few burial and fortress sites were reported to be archaeological remains of the early Baekje, and a few settlement and jar burial sites were assumed to be those of Mahan without clear definition of the Mahan Culture. Since 1990s, fortunately, a number of new archaeological sites of Hanseong Baekje and Mahan have been reported and investigated. Thanks to the new discoveries, there has been significant progress in the study of early Baekje and Mahan. In particular, a number of excavations of Pungnap-dong Fortress site(Historical site NO. 11, 1996~2003), considered to be the Wiryeseong at south of the Han River, the second capital of the Hanseong Baekje, provided critical archaeological evidence in the study of Hanseong Period of Baekje. Since the end of the 1990s, a number of sites have been reported in Gyeonggi, Chungcheong, and Jeolla provinces, as well. From these sites, archaeological features and artifacts representing distinctive cultural tradition of Mahan have been identified such as unstamped fortresses, pit houses cut into the rock, houses with lifted floor(掘立柱 건물), and potteries decorated with toothed wheel and bird's footprint designs. These cultural traditions reflected in the archaeological remains played a critical role to define and understand archaeological identity of the Mahan society. Moreover, archaeological data from these new sites reported in the middle and southwestern parts of the Korean Peninsular made it possible to postulate a hypothesis that the history of Mahan could be divided into three periods to the change of its sociopolitical center in relation with the Baekje Kingdom's political Situation as follows: Cheonan (天安) Period, Iksan(益山) Period, and Naju(羅州) Period. The change of Mahan's sociopolitical center is closely related to the sociopolitical expansion of the Hanseong Baekje.

• Journal of Korean Society of Forest Science
• /
• v.110 no.2
• /
• pp.217-232
• /
• 2021

This study calculated the productivity and cost of extraction and processing of logging residues by cut-to-length (CTL) and whole-tree (WT) harvesting methods. In addition, the comparative analysis of the characteristics of wood chip fuel to examine whether it was suitable for the fuel conditions of the energy facility. In the harvesting and processing system to produce the wood chips of logging residues the system productivity and cost of the CTL harvesting system were 1.6 Gwt/SMH and 89,865 won/Gwt, respectively. The productivity and cost of the WT harvesting system were 2.9 Gwt/SMH and 72,974 won/Gwt, respectively. The WT harvesting productivity increased 1.3times while harvesting cost decreased by 18.7% compared to the CTL harvesting system. The logging residues of wood chips were not suitable for CTL wood chips based on International Organization for Standardization (ISO 17225-4:2021) and South Korea standard (NIFoS, 2020), but the quality (A2, Second class) was improved through screening operation. The WT-unscreened wood chips conformed to NIFoS standard (second class) and did not conform to ISO but were improved through screening operation (Second class). In addition to the energy facility in plant A, all wood chips except CTL-unscreened wood chips were available through drying processing. The WT-unscreened wood chips were the lowest at 99,408 won/Gwt. Plants B, C, and D had higher moisture content than plant A, so WT-unscreened wood chips without drying processing were the lowest at 57,204 won/Gwt. Therefore, the production of logging residues should improve with operation methods that improve the quality of wood chips required for applying the variable biomass and energy facility.

• (The) Research of the performance art and culture
• /
• no.41
• /
• pp.257-284
• /
• 2020

Goseong Ogwangdae started academic research in the late 1950s and was designated as a national intangible cultural asset in 1964. From the time of the academic survey to the time of designation, it was recorded as using paper masks, but when the recording image was filmed in 1965, it was already changed to wooden masks. In 1960, before being designated as an intangible cultural asset, the number of masks, which was 9 points, gradually increased to 19 points in 1964. It is necessarily included in the leper, Chorani, Malttuki, Cheongbo-Yangyang, Halmi, and Jemilju, but the character of the yangban is not yet clearly differentiated. Hwangbongsa and Sangju appeared as bare faces, and consumption, milling, Cheongbo-Yangyang are used together with Bibi and inspiration. It can be guessed that Bibi was not the appearance of a foreign object with horns as it is now, considering that Bibi and Madangsoi were used together. Since 1965, shortly after the designation, the whole of the Goseong Ogwangdae mask has been changed to a wooden mask. All the characters except for resident, courtyard, and top-of-the-line are wearing masks. Bibi, Hongbaek, and service masks have never appeared until 1964. The Yangban was changed to the closing ceremony with six people in the order of Won-Yangban, Baekje, Heukje, Cheongje, Hongbaek, and Jonggadoryong. Starting in 1969, the mask enters the stable period where the kind is the same as the present. Bibi-Yangban uses both the Won-Yangban and the Jemilju uses the Somu, but all other characters use the individual mask to use a total of 18 masks. The Yangbans are clearly differentiated, and a total of seven Yangban appear. The reason why the change in the type of mask and the expression of material is so large is that the first generation of mask makers died and the tradition of mask production was cut off, but there is also a cause of the extreme change in the environment of the drama that the performers who joined after the designation had to face. Also, it is closely related to the change of the times when the meaning and weight of masking in masking has changed. At that time, the performers were not so tied to the current concept of 'original form' that they preserved the appearance of the designated time. Originally, Goseong Ogwangdae was centered on improvisation dance, not the formalized dance as it is now, and there was a certain fluid aspect in the retelling, so it was flexible in the use of masks even before the designation of cultural assets. Strict rules did not apply in the details, as it was a self-sufficient play by the performers, not an offer event. The form and contents of this fluid play are changed to preparation for the performance while preparing for the folk art contest. As the subject of the contest in self-sufficient play, dance, costumes, and props became more and more colorful as well as dancing, costumes, and props. As a result, participation in the contest brought about changes in the overall performance and changed the mask, which was accepted within the preservation society.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.1-41
• /
• 1988

For the purpose of utilizing the sawdust having poor combining properties as board raw material and resulting in dimensional instability of board, polypropylene chip (abbreviated below as PP chip) or oriented PP thread was combined with sawdust particle from white meranti(Shorea sp.). The PP chip was prepared from PP thread in length of 0.25, 0.5, 1.0 and 1.5 cm for conventional blending application. Thereafter, the PP chip cut as above was combined with the sawdust particle by 3, 6, 9, 12 and 15% on the weight basis of board. Oriented PP threads were aligned with spacing of 0.5, 1.0 and 1.5cm along transverse direction of board. The physical and mechanical properties on one, two and three layer boards manufactured with the above combining conditions were investigated. The conclusions obtained at this study were summarized as follows: 1. In thickness swelling, all one layer boards combined with PP chips showed lower values than control sawdustboard, and gradually clear decreasing tendendy with the increase of PP chip composition. Two layer board showed higher swelling value than one layer board, but the majority of boards lower values than control sawdustboard. All three layer boards showed lower swelling values than control sawdustboard. 2. In the PP chip and oriented thread combining board, the swelling values of boards combining 0.5cm spacing oriented thread with 1.0 or 1.5cm long PP chip in 12 and 15% by board weight were much lower than the lowest of one or three layer. 3. In specific gravity of 0.51, modulus of rupture of one layer board combined with 3% PP chip showed higher value than control sawdustboard. However, moduli of rupture of the boards with every PP chip composition did not exceed 80kgf/cm2, the low limit value of type 100 board, Korean Industrial Standard KS F 3104 Particleboards. Moduli of rupture of 6%, 1.5cm-long and 3% PP chip combined boards in specific gravity of 0.63 as well as PP chip combined board in specific gravity of 0.72 exceeded 80kgf/$cm^2$ on KS F 3104. Two layer boards combined with every PI' chip composition showed lower values than control sawdustboard and one layer board. Three layer boards combined with.1.5cm long PP chip in 3, 6 and 9% combination level showed higher values than control sawdustboard, and exceeded 80kgf/$cm^2$ on KS F 3104. 4. In modulus of rupture of PP thread oriented sawdustboard, 0.5cm spacing oriented board showed the highest value, and 1.0 and 1.5cm spacing oriented boards lower values than the 0.5cm. However, all PP thread oriented sawdustboards showed higher values than control saw-dustboard. 5. Moduli of rupture in the majority of PP chip and oriented thread combining boards were higher than 80kgf/$cm^2$ on KS F 3104. Moduli of rupture in the boards combining longer PP chip with narrower 0.5cm spacing oriented thread showed high values. In accordance with the spacing increase of oriented thread, moduli of rupture in the PP chip and oriented thread combining boards showed increasing tendency compared with oriented sawdustboard. 6. Moduli of elasticity in one, two and three layer boards were lower than those of control sawdustboard, however, moduli of elasticity of oriented sawdustboards with 0.5, 1.0 and 1.5cm spacing increased 20, 18 and 10% compared with control sawdustboard, respectively. 7. Moduli of elasticity in the majority of PP chip and oriented thread combining boards in 0.5, 1.0 and 1.5cm oriented spacing showed much higher values than control sawdustboard. On the whole, moduli of elasticity in the oriented boards combined with 9% or less combination level and 0.5cm or more length of PP chip showed higher values than oriented sawdustboard. The increasing effect on modulus of elasticity was shown by the PP chip composition in oriented board with narrow spacing. 8. Internal bond strengths of all one layer PP chip combined boards showed lower values than control sawdust board, however, the PP chip combined boards in specific gravity of 0.63 and 0.72 exceeded 1.5kgf/$cm^2$, the low limit value of type 100 board and 3kgf/$cm^2$, type 200 board on KS F 3104, respectively. And also most of all two, three layer-and oriented boards exceeded 3kgf/$cm^2$ on KS F. 9. In general, screw holding strength of one layer board combined with PP chip showed lower value than control sawdustboard, however, that of two or three layer board combined with PP chip did no decreased tendency, and even screw holding strength with the increase of PP chip composition. In the PP chip and oriented PP thread combining boards, most of the boards showed higher values than control sawdustboard in 9% or less PP chip composition.