• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.205-209
• /
• 2000

Modem wireless communication equipments provides various multimedia and aims at the development of low-power, minimum size and weight, and low-cost implimentations. Because of the heterodyne architecture which was invented many decades ago in the wireless communication system using too many components, it was difficult to make it small, compact and On-Chip so it does not proper for future communication. That gives rise a new developing architecture, so called, Direct Conversion. Because The Direct Conversion down-converts the wireless frequency band to baseband directly, it does not need using additive components and has a merit of reduction in power dissipation. We describes the Direct Conversion architecture and DC-Offset, which must be solved, theorectically and predicts system performance enhancement when adopt the AC-Coupling method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.295-302
• /
• 2011

In this paper we consider technological requirements to broadcast digital television signals using single frequency networks(SFN) in the Advanced Television Systems Committee(ATSC) transmission systems and propose Interference Cancellation Digital On Channel Regenerative Repeater(IC-DOCR) thar overcomes the limitation of EDOCR(Equalization Digital On Channel Repeater) proposed by ETRI. The proposed IC-DOCR maintains the benefits of EDOCR that have good output signal quality removing multi-path, additive white Gaussian noise(AWGN). In additional, since the Interference Cancellation algorithm using the 8-VSB symbol demodulation of received signal removes the Interference of feedback signal, IC-DOCR improve the weakness of EDOCR that have low isolation between receive and transmit antenna so that can overcome the limitation of output signal power. we did analysis and verification of the proposed system performance using computational simulation.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.5
• /
• pp.71-76
• /
• 2000

A TC-16ADPSK scheme for transmitting different kinds of information simultaneously is proposed in this paper. The scheme is designed for simultaneously transmitting two kinds of Information on one channel. In signal mapping, a data of two kinds of information is used to phase modulation on Star-16APSK constellation and the other to amplitude modulation. In detection, each data independently recovers from mixing signal on each detector Therefore, we can transmit two kinds of Information on one channel can be transmitted efficiently. BER performance of the proposed scheme is analyzed on AWGN channel and Rayleigh fading channels on a computer with Matlab communication toolbox. On same SNR, the Gray code mapping has more 0.5-1.5dB coding gains than Ungerboeck's code mapping gains.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.1
• /
• pp.25-31
• /
• 2010

It is known from consumer surveys that the interior design of cars greatly influences on consumers' affection. Most notably, the instrument panel which occupies the driver's attention while driving would be one of the main components that affect consumer's affection, but the designer does not often put due importance to this design component. The purpose of this study is to define consumers' affection on the instrument cluster panel in terms of its design factors: color of panel lighting and layout of meters as independent factors. Semantic differentials or affective adjectives that are related to the instrument panel were first derived from surveys, existing studies and the available literature. Then, representative affective factors were drawn using factor analysis and multi-dimensional scaling (MDS). Evaluation of the instrument panel was performed and analyzed by Taguchi's robust design to provide more robust results under various noise factors which are color and material of car interior. Experiment revealed that consumers had five affective factors on the instrument panel and luxurious, charming, and visible affections are grouped into a factor and unique and dynamic affections in another factor. Evaluation of the instrument panel by Taguchi's robust design found that the white color of panel lighting and the panel with four meters was the most preferred design in terms of both the affection of luxury and uniqueness.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.12
• /
• pp.69-75
• /
• 2004

In the paper, system is combined multiband system with DS-UWB techniques with properties including low peak-to-average power ratio, robustness to multiuser interference and excellent security. Because each sub-band is not satisfied with coherence bandwidth, rake receiver in each sub-band is applied to the Proposed system receiver. Output of rake receiver is combined by using Maximal Ratio combining technology. In this paper we mathematically analyse the BER of the DS-UWB system with singleband and multiband systems in the narrow interference channel condition and multi user interference channel condition, the simulation results show that proposed scheme is getting robuster with increasing of the number of subbands.

• Journal of the Korea Society for Simulation
• /
• v.17 no.1
• /
• pp.17-22
• /
• 2008

Double-binary turbo code has been adopted as an error control code of various future communication systems including wireless metropolitan area networks(WMAN) due to its powerful error correction capability. One of the components affecting the performance of turbo code is internal interleaver. In 802.16 d/e system, an almost regular permutation(ARP) interleaver has been included as a part of specification, however it seems that the interleaver is not optimized in terms of decoding performance. In this paper, we propose three optimization methods for the interleaver based on spatial distance, spread and minimum distance between original and interleaved sequence. We find optimized interleaving parameters for each optimization method and evaluate the performances of the proposed methods by computer simulation under additive white Gaussian noise(AWGN) channel. Optimized parameters can provide up to 1.0 dB power gain over the conventional method and furthermore the obtainable gain does not require any additional hardware complexity.

• Journal of Digital Contents Society
• /
• v.7 no.3
• /
• pp.139-145
• /
• 2006

Short-range wireless transmission and networking technologies are becoming increasingly important in enabling useful mobile applications. Bluetooth and IEEE 802.11b standards are the most commonly deployed technologies for WPAN and WLAN. This paper investigates the effect of short range wireless channel on the performance of MC-CDMA/BPSK system and Bluetooth GFSK signal transmission in AWGN and Rician fading environments. And we investigate performance degradation due to interference effects in short range wireless channel. We firstly derive a equation for the bit error probability in additive white Gaussian noise depending on MC-CDMA/BPSK signal and GFSK modulation signal parameters according to the Bluetooth RF standard. Then, from this error rate expression we calculate the mean error probability for MC-CDMA/BPSK signal and Bluetooth GFSK signal in Rician fading and interference channel. In particular, the impacts of the Rician fading depth and interference level on the error probability is shown in BER performance figures.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.420-427
• /
• 1993

Dielectric thin film mirrors are embedded in multimode and single-mode fibers by a fusion splicing technique. The fibers with $45{\circ}$ angled embedded mirrors serve as ultra-compact directional couplers with low excess optical loss of 0.2 dB for multimode and 0.5 dB for single mode at 1.3 ${\mu}m$ and excellent mechanical properties. The reflectance is wavelength dependent and strongly polarization depencient. Far-field scans of the reflected output power measured with a white-light source show a pattern which is almost circularly symmetric with aspect ratio of 1.09 at 5% of the peak power. The splitting ratio in a multimode coupler measured with a diode laser source is much less dependent on input coupling conditions than in conventional fused biconical-taper couplers, indicating that these couplers are less susceptible to modal noise occuring in optical fiber communication systems. Spectral properties of multilayer internal mirrors normal to the fiber axis have been investigated experimentally, and a matrix analysis has been used to explain the results.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2007

Ground reaction force (GRF) measures are one of the most commonly used in biomechanical study. GRF system is very useful educational tool to explain and demonstrate the Newton's law of universal gravitation and laws of motion as well. However, accuracy, intra- and inter- force platform measures' consistency, reliability, noise, and the effect of platform mounting to GRF measures were not clearly viewed. The aim of this study was to examine the above. GRFs of a plastic dummy and two subjects' quiet upright standing were collected at four university laboratories eight force platforms. The types of platforms, analysis programs, and platform set-up were various. Three 100s-trials were conducted with sampling frequency of 100 Hz. First two trials' vertical component of GRFs, Fz, and CoP sway ranges of mid-60s-portion of 100s trials were analyzed by the paired t-tests and one-way ANOVA. Six of eight platforms' 1st and 2nd trial dummy Fz were statistically different (p<.05) and all platforms ICC were poor (<.28). Fz of the two platforms in every four laboratories were statistically different (p<.05). There were white noises and/or very distinctive noises at specific frequency ranges in all Fz measures. 5 Hz low-pass filtering made clear the Fz differences. CoP ranges of dummy were less than 0.5 cm and the best was 0.02 cm. This CoP range finding agrees with previous results suggests the importance of force platform mounting and A/D card resolution.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1635-1641
• /
• 2017

In this paper, a trellis-coded 3-dimensional (3-D) orthogonal frequency division multiplexing (OFDM) system is presented and its performance is analyzed. Here, a set-partitioning technique for trellis coding with respect to a 3-D signal constellation is also presented. We show theoretically that the proposed system, which exploits a trellis coding scheme with recursive systematic convolutional codes (RSC) of code rate R = 1/3 and 2/3, can improve symbol error rate (SER) up to 7.8 dB as compared with the uncoded OFDM system in an additive white Gaussian noise (AWGN) channel. Computer simulation confirms that the theoretical analysis of the proposed system is very accurate. It is, therefore, considered that the proposed trellis-coded 3-D OFDM system is well suited for the high quality digital transmission system without increase in the available bandwidth.