• 전기학회논문지P
• /
• 제58권2호
• /
• pp.142-147
• /
• 2009

Conventional HP(high pressure) sodium or Metal-halide lamps have a life span of around one year requiring at least annual replacement and maintenance. High Power LED lights require no regular maintenance further increasing savings on replacement bulbs, access equipment and labour costs. New installations benefit from a substantial reduction in the cost of expensive heavy duty cable required for sodium lighting. Especially, LED light can achieve variable color temperature, high functional performance in the field of street light. There are two main method to achieve variable color temperature function of the street light. one method is using RGB multi-chip LED, the other is using Orange-White LED method. In this paper, it was compare RGB Multi-chip LED with white-orange LED for there characteristics performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.145-147
• /
• 2003

This paper presents a method of improvement of color mixing in an RGB LED white lamp. The deviation from white light after RGB color mixing results mainly from the difference in the ray direction among LEDs. The authors propose a method using tilted lenses covered over each LED to deflect the overall direction of the ray generated from far-sited LEDs toward the center axis of the lamp. The degree of improvement is evaluated using a color discrimination method based on McAdam ellipse.

• 조명전기설비학회논문지
• /
• 제18권2호
• /
• pp.8-15
• /
• 2004

본 논문은 RGB LED를 이용한 백색 전구의 색혼합 향상에 관한 것이다. RGB LED를 이용하여 전구를 설계하였을 경우, LED의 위치에 따라 광선의 진행 경로가 틀려 색혼합이 잘 되는 않는다. 따라서 각각의 LED에 경사렌즈를 씌워서 광선의 진행경로를 전구의 중심축으로 향하게 하여 주었다. 색혼합 정도는 MacAdam ellipse 이론을 이용하여 평가하였다.

• 한국광학회지
• /
• 제16권5호
• /
• pp.433-439
• /
• 2005

백색 광원과 컬러 센서를 이용하여 바이오 센서의 발색 정도를 측정하는 측정기를 개발하였다. 컬러 센서의 적색, 녹색 및 청색영역의 빛의 세기를 비율로 나타냄으로서, 조사 광의 세기가 변하는 경우에도 안정적인 분광 정보를 얻을 수가 있었고, 바이오 센서의 화학적 처리 과정에서 발생하는 수막 등의 영향에 의한 오차를 감소시킬 수 있다. 바이오 센서의 발색 변화율이 작은 경우 컬러 센서의 각 영역에 대한 증폭률을 조정하는 것만으로 시스템의 민감도를 향상 시킬 수 있었다.

• 대한인간공학회지
• /
• 제26권4호
• /
• pp.33-39
• /
• 2007

In the full white pattern, white uniformity means the degree of uniform distribution of white color and luminance across the whole screen. Among the FPDs(Flat Panel Displays), the TFT-LCD has weak point of viewing angle. The viewing angle considering location and direction can cause different image quality of the TFT-LCD. Therefore, white uniformity of the TFT-LCD must consider viewing angle. Based on international standards, this study proposes an alternative that is realistic and ergonomic measurement of white uniformity of the TFT-LCD.

• 한국생활과학회지
• /
• 제19권1호
• /
• pp.149-156
• /
• 2010

TV news anchor woman's appearance, voice, expression, and clothing, etc., have an influence on the reliability of the article to be reported. Among these, clothing is the most crucial factor in forming an anchor woman's image, especially the clothing color factor. This study is aimed at providing the basic foundation for anchor woman when they select the clothing color by analyzing the clothing color image on the screen. For this purpose, the KBS and MBC 9 o'clock news desk and SBS 8 o'clock news of the local major news programs were selected. With the collection of 300 pieces of news clips related to anchor woman's clothing from January to December 2008, they were classified into F/W seasons and analyzed by the clothing color. The surveying method of clothing color was to capture the anchor woman's clothing among the news clips, then pick the representing color by applying Adobe Photoshop, and researching the formed $L^*a^*b^*$ value of color chips. The surveyed color was transformed into value of distant cell, H V/C, and the results were analyzed. As a result, it showed that the White system for anchor woman's clothing during the S/S seasons is most frequently picked, followed by the Red system. In F/W seasons, Gray system is the most favored, then White and Red, respectively. It was revealed that the most frequently selected colors for upper-wear by anchor women in the three broadcasting stations was an achromatic color, such as White or Gray, and then the chromatic color, Red. It shows that there is no big difference in season. The Inner-wear color matched the jackets which were also achromatic in color, white and black being the most favored in the S/S seasons, and in the case of chromatic colors, Red was the most favored. In addition to this, identical coloration with jacket, coloration with similar color, or single color as clothing color were no less frequently adopted. During the F/W seasons, identical coloration accounts for 26%, the most popular colored being White and Red. It was found that the coloration with achromatic colors are highly favored in the three major broadcasting stations alike.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.59-68
• /
• 2023

Currently, yellow phosphor of Y3Al5O12:Ce3+ (YAG:Ce) fluorescent material is applied to a 450~480nm blue LED light source to implement a white LED device and it has a simple structure, can obtain sufficient luminance, and is economical. However, in this method, in terms of spectrum analysis, it is difficult to mass-produce white LEDs having the same color coordinates due to color separation cause by the wide wavelength gap between blue and yellow band. There is a disadvantage that it is difficult to control optical properties such as color stability and color rendering. In addition, this method does not emit purple light in the range of 380 to 420nm, so it is white without purple color that can not implement the spectrum of the entire visible light spectrum as like sunlight. Because of this, it is difficult to implement a color rendering index(CRI) of 90 or higher, and natural light characteristics such as sunlight can not be expected. For this, need for a method of implementing sunlight with one LED by using a method of combining phosphors with one light source, rather than a method of combining red, blue, and yellow LEDs. Using this method, the characteristics of an artificial sunlight LED device with a spectrum similar to that of sunlight were demonstrated by implementing LED devices of various color temperatures with high color rendering by injecting phosphors into a 405nm deep blue LED light source. In order to find the spectrum closest to sunlight, different combinations of phosphors were repeatedly fabricated and tested. In addition, reliability and mass productivity were verified through temperature and humidity tests and ink penetration tests.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.239-239
• /
• 2015

삼성, LG전자 등 다양한 사업부의 White Anodizing구현기술의 Need는 항상 존재하고 있으며, 특히 White와 Black Color의 콤비네이션으로 친환경 이미지 강조 및 핸드폰의 고급화에 필연적인 메탈화로 작년부터 White Anodizing의 수요요청이 쇄도하고 있다. 그러나 현행 공업용 Anodizing 기술(황산법)은 봉공처리 전 착색공정에서 Red, Blue, Black 등 염료분자와 달리 염료 분자가 비교적 큰 White 염료는 Anodizing으로 성장된 다공성피막 내부로 들어가지 못해 국내 Anodizing전문기업 뿐만아니라 일본 기업 및 연구소 등에서도 무수한 시도를 하고 있지만 현재까지는 완벽한 White Anodizing구현기술이 전무한 상태이다. 이에 당사는 알루미늄합금을 White의 안료나 염료가 아닌 알칼리전해액의 Pulse전류인가 PEO(Plasma electrolytic oxidation)처리 공정에 의거 White Anodizing기술을 개발하고자 하였다. 알칼리 전해질에 의한 Anodizing 처리기술로 White와 유사한 색상을 구현하고 있으나, 수요자가 요구하는 White Anodizing으로 제품을 양산하는데 어려움이 있어 기존 Anodizing 처리 대신 Pulse전류인가 PEO처리기술로 White Color를 구현하여 수요요청이 쇄도한 국내외 기업체에 공급하고자 한다. 본 기술은 알카리 전해액을 사용하므로 친환경적이며, 다공성 피막으로 인한 우수한 도장 밀착성, 실링처리에 의한 내식성 향상, PEO 피막의 우수한 경도 및 내마모성 등을 나타내며, 알루미늄뿐만 아니라 마그네슘합금, 티타늄 등에도 공히 적용이 가능하며, White Anodizing의 특화된 기술로 표면처리기술 우위 선점 및 원가절감 등이 가능하다. 당사는 알루미늄 아노다이징 전문 기업으로서 내식성 목적의 연질 아노다이징 처리 및 고내마모성을 목적으로 하는 자동차 부품 및 기계 부품용 경질 아노다이징 처리를 주로 수행하고 있다. 본 발표에서는 당사의 표면처리 기술 및 알루미늄의 아노다이징에 대한 소개를 하고자 한다.

• 한국의상디자인학회지
• /
• 제12권3호
• /
• pp.133-143
• /
• 2010

The purpose of this study was to investigate the clothing image according to gender, coloration of chromatic and achromatic color, and interval of checked pattern. The experimental materials developed for this study were a set of stimulus and response scales. The stimuli were 16 color pictures, in which the gender(male, female), interval(0.5cm, 1.5cm, 3.5cm, 5.5cm), and coloration(WR: white+red, WY: white+yellow, WB: white+Blue, WP: white+purple) were manipulated. The 7-point scale was used for evaluation of clothing image. Data were obtained from 192 male college students and 192 female college students living in Seoul, Gwangju, Daegu, Jinju, and Changwon on March 2010. For data analysis, ANOVA and Duncan-test were used by using SPSS program. Results of this study were as follows.; Clothing image according to coloration of chromatic and achromatic color, and interval of checked pattern consisted of six dimensions of attractiveness, appeal, activity, freshness, modesty, and cuteness. Gender showed an independent effect on attractiveness, appeal, activity, freshness, and cuteness. Interval showed an independent effect on attractiveness. Coloration showed an independent effect on appeal, activity, freshness, modesty, and cuteness. Also, interaction effects of gender and coloration on freshness and cuteness were found.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1429-1432
• /
• 2007

We fabricated white organic light emitting diodes(WOLED) having two complementary and three primary colors with emission layers of DPVBi / MADN : DCM2-0.5% and DPVBi / $Alq_3$ / MADN : DCM2-1.5%, respectively. WOLED using three primary colors shows broad electroluminescence including green emission peak at 510nm while optical properties of the two complementary WOLED was higher current efficiency of 6.2 cd/A than 4.9 cd/A of three primary color WOLED. The maximum luminescence of WOLED with two complimentary color was $15200cd/m^2$ along with luminous efficiency 6.2cd/A, as achieving stable white color coordinates for both of WOLEDs at (0.33 , 0.33) almost.