• 한국해양학회지
• /
• v.30 no.5
• /
• pp.480-492
• /
• 1995

Petrographic investigation has been carried out to determine the composition of the beach sediments and the affecting factors which have controlled their compositional variations from Hyupjae, Aeweol, Iho, Samyang, Hamdeok, Sehwa, Pyoseon, Jungmun, and Hwasun areas along the coast of the Cheju Island. Average mean sizes of the beach sediments are Hyupjae 2.2ø, Aeweol 0.8ø, Iho 1.4ø, Samyang 2.4ø, Hamdeok 1.6ø, Sehwa 1.5ø, Pyoseon 2.1ø, Jungmun 0.4ø, and Hwasun 0.9ø, thus, aries from 0.4 to 2.4ø. The beach sediments from Pyoseon and Hwasun areas are poorly sorted, those from Aeweol and Jungmun areas are moderately sorted and those from the rest of the areas are moderately well sorted. While-colored beach sediments in Hyupjae, Aeweol, Hamdeok, Sehwa, and Pyoseon areas are mostly composed of calcareous shells (more than 85%) such as mollusk, red algae, benthic foraminiferas, etc., whereas volcanic rock fragment is the dominant component of the black-colored beach sediments in Iho, Samyang, and Hwasun areas. Especially, the relatively white-colored beach sediment in Jungmun area, which is on e of the carbonate-dominant areas, shows a higher content of rock fragments than the other carbonate-dominant areas. The beach sediments in Pyoseon area show a high content of carbonate intercalates. Considering the contributions by organisms according to grain size, grains with the size range of 1∼2ø are mostly composed of calcareous red algae fragments, and grains with the size range of 2∼3ø consist of mollusk fragments. It is also notable that bryozoan fragments comprise about 48% of the sediment in Samyang area with the size range of 0∼1ø. The composition of the beach sediments in Cheju Island appears o be controlled by the riverine supply rate of volcanic rock fragments, the lithology of the rocks distributed ear the beaches, the direction of alongshore currents, and the direction of storms, etc.. It is suggested that the beach sediments in Iho and Samyang areas show black color because of the higher supply rate of the volcanic rock fragments from the nearby rivers, whereas those in the rest of the areas show white color due to the relatively lower content of volcanic rock fragments and higher content of carbonate components transported from shallow marine environment. In Hwasun area, the content of volcanic rock fragments is high, and they are directly from the tuffaceous rocks distributed nearby. Also, the volcanic rock fragments in Jungmun area are transported not only from the rivers nearby but also from the nearby tuffs by storm activities. The beach sediment in Pyoseon area contains a high content of carbonate intercalates, which formed in the nearby shallow marine environment through marine cementation. This indicates that active marine cementation occurs in shallow marine environment near Pyoseon area.

• Food Science of Animal Resources
• /
• v.31 no.6
• /
• pp.921-927
• /
• 2011

To compare pork quality from different pig species domesticated for Korean consumers, the meat quality characteristics of 5 different pure breeds of Landrace (L), Yorkshire (Y), Duroc (D), Berkshire (B), and Chester White (C) were determined from the 3 parts of loins, butts, and bellies. The fat content of loins was higher in breed D than in the other breeds, while that of butts and bellies was higher in breed B. The CIE color $a^*$ and $b^*$ values of the loins and butts from breed C were lower than those of the other breeds, but the color values of the belly part did not significantly differ by breed due to the high fat accumulation. The drip loss and cooking loss significantly differed depending on meat parts: breeds D and B were inferior in loins and butts but superior in bellies. The lipid oxidation of raw meat did not increase during the 7 d storage. The cooked butts of breed C had less thiobarbituric acid-reactive substances values than those of the other breeds at 7 d, and the cooked bellies of breeds D and B had less. Moreover, there were only minimal differences in fatty acid compositions by pork breed and part. From the view points of the physicochemical and organoleptic analysis of pork from different pig species, it is estimated that breed D had better meat quality in the loin part and breed B had better meat quality in the butt. The belly meat quality of breed C showed the least value. Although the meat quality of pig species differed depending on the parts and it was difficult to compare the meat quality of a part using the meat quality parameters of another part, the result of this study could provide basic information that can be used to improve the meat quality of different parts of pig species.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.5
• /
• pp.709-715
• /
• 2015

As consumers interest in microgreens is increasing worldwide, the production of leafy microgreens uisng different LED lights was investigated in this study. The experiment was carried out to evaluate the effects of different LED lights on the composition and vitamin C contents of buckwheat microgreens. Physicochemical properties of buckwheat microgreens grown under different lights (red, blue, and white) and control exposed to a dark room were investigated. Moisture contents of buckwheat microgreens were 95.65% under white light (WL), 95.75% under blue light (BL), 90.77% under red light (RL), and 89.71% under dark room (DR). Crude ash contents of buckwheat microgreens grown under WL, DR, RL, and BL were 0.39%, 0.39%, 0.31%, and 0.37%, respectively. Crude protein contents of buckwheat microgreens grown under DR, RL, WL, and BL were 7.12%, 7.81%, 1.60%, and 2.40%, respectively. Crude fat contents of buckwheat microgreens grown under DR, BL, RL, and WL were 1.12%, 0.54%, 0.35%, and 0.22%, respectively. $^{\circ}Brix$ was the highest in microgreens grown under BL and RL and the lowest in buds grown under DR. Vitamin C content was the highest in buds grown under WL and the lowest in buds grown under BL. Total chlorophyll content was the highest in microgreens grown under RL and the lowest in buds grown under WL. For mineral content measurement of buckwheat microgreens, Ca, K, Mg, and P contents were high whereas B, Cu, and Zn contents were not detected. The mineral contents of buckwheat microgreens according to each color of light showed significant differences. These results demonstrated that treatment of different colored LED lights during cultivation was able to increase vitamin C content up to affecting the nutritional value of buckwheat microgreens.

• Korean Journal of Poultry Science
• /
• v.35 no.2
• /
• pp.171-176
• /
• 2008

Animal welfare advocates, claim that the induced molting by fasting be avoided. This study was conducted to evaluate the effect of molting induced by various feeding methods on productivity and egg quality in laying hens. We used 400 flocks of 60-week-old leghorn laying hens in four treatments(five replicates of 20 hens each): fasting method (C), feeding single corn grain diet (T1), feeding single wheat bran diet (T2) and feeding single alfalfa meal diet (T3). As the result of the experiment, egg production and daily egg mass significantly decreased only in T1 compared with the control during the $1{\sim}4th$ week after the secondary egg laying (P<0.05). Although the amount of feed intake was significantly less in T1 group during the $1{\sim}4th$ week compared to the control, no significant difference was detected during the total period (P>0.05). In addition, no significant difference of feed conversion was observed between treatment groups. In terms of egg quality, the egg shell thickness was significantly improved in T1 group than the control group by feeding only corn at the 10th and 14th week after the secondary egg laying (P<0.05), but the significant decrease was observed at the corn (T1) and wheat bran (T2) fed treatment groups than the control group at the 26th week of the experiment (P<0.05). The eggshell strength and haugh unit did not show any difference by the molting methods. Egg yolk color was significantly decreased in T1 and T2 group than the control group at the 6th week (P<0.05). However, T1 and T2 group resulted to show significantly high egg yolk color at the 18th week of the experiment (P<0.05). As the result of the experiment, no large difference was observed in the productivity by the feeding molting method and by the fasting induced molting method. In addition, the single diet fed feeding induced molting method by using alfalfa revealed to show more satisfactory trend than the corn or wheat bran single diet fed feeding induced molting methods even if no statistically significant difference was found in terms of egg productivity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.3
• /
• pp.245-252
• /
• 2010

The objective of this study was to obtain the basic informations on variability of germplasm and cultivation practice for the production of biodiesel in sunflower. A total of 275 accessions obtained from the National Agrobiodiversity Center (34 landraces from Korea, 219 and 22 introductions from America and other countries, respectively) were screened to evaluate variations of seed characteristics, oil content and fatty acid composition. Seed types were classified into 4 types (broad ovoid, narrow ovoid, rounded and elongated). The broad ovoid type was the highest proportion of 40.4%, while the elongated type was the lowest proportion of 5.0% among accessions. Also, the seed colors were classified into 4 colors (gray, brown, black and white). Gray and brown seed color showed the highest distribution and white seed color showed the lowest among accessions, respectively. Hundred and one liter seed weight ranged 2.9~15.5g and 178~439g with averages of 6.3g and 322.0g, respectively. Oil content ranged from 11.7% to 45.6% with an average of 25.5%. The frequency distribution of oil content showed the highest in range of 22~28% and the lowest in range of over 40%. Three promising accessions with higher oil content than 40.0% were IT031967, IT031970 and IT031965 introduced from America. Palmitic and stearic acid contents, saturated fatty acid, ranged 3.1~7.6% and 1.3~4.1% with averages of 4.7% and 2.2%, respectively, and a total content of saturated fatty acid ranged 5.4~9.4% with an average of 6.9%. Oleic and linoleic acid contents, unsaturated fatty acid, ranged 18.1~75.7% and 18.1~74.1% with averages of 55.2% and 38.0%, respectively. Five accessions, IT031831, IT031669, IT031895, IT031938 and IT031694, showed higher oleic acid content than 70%. A total content of unsaturated fatty acid ranged 89.6~94.8% with an average of 93.0%.

• Economic and Environmental Geology
• /
• v.18 no.4
• /
• pp.343-355
• /
• 1985

Spectral reflectivity and microhardness were measured quantitatively on polished surfaces of a selection of bireflecting minerals obtained from several well known metallic deposits. Incremental errors are much higher than decremental errors and errors were found to be lowest in the spectral region close to the green wavelength ($544m{\mu}$). The characteristics of the spectral profile are significant in their control of white light color. The covellite and graphite have reflectivity profiles similar in shape for each principal direction, showing noticeable difference in magnitude between the profiles: The spectral reflectivity of covellite parallel to the extraordinary vibration is higher (R$$\simeq_-$$10%) than that parallel to the ordinary vibration and graphite shows opposite feature. Reflectivity of the enargite and famatinite cut parallel to the cleavage plane is always higher (R$$\simeq_-$$5%) than that of the section cut normal. The optical symmetry of 5 bireflecting minerals was determined by noting the variation in reflectivity at $544m{\mu}$. The data indicate that covellite is optically uniaxial positive and graphite is optically uniaxial negative. The Rm values for enargite and famatinite are clearly closer to the minimum value for the mineral ($R_1$) than to the maximum value ($R_2$) : the minerals can be recognized as optically biaxial positive. Enargite and famatinite cut parallel to cleavage have much higher hardness values (HV=> $200kg/mm^2$) than those cut normal to cleavage. Vickers indentations exhibit characteristic features for all the bireflecting mineral species studied. Broad radicle groupings of the mineral species can be made with regard to the reflectivity microhardness numbers.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.803-811
• /
• 2003

This study compared the physicochemical characteristics of yellow pigments in domestic and imported yellow croakers during distribution and storage. The croaker is generally adulterated by mixed color product of red and yellow pigment. This study found that the yellow pigment was stable during pH and temperature changes, but the red pigment was less stable than the yellow pigment. As for the light effect on the yellow pigment and the red pigment, there was no change in the remaining rate of the pigment stored in a dark place. The moisture content decreased according to the storage period, and the width of changes was large in the order of croaker stored at $5^{\circ}C$, croaker stored at $15^{\circ}C$ and dried croakers. The yellowness value of the abdomen of the adulterated white croaker did not show any large difference at the initial stage and for a storage period of 10 days at $5^{\circ}C$. However, the yellow croakers showed a decreasing trend according to the storage period at $15^{\circ}C$. The croaker can be generally adulterated by a mixed color of red and yellow pigment. For the texture change in accordance with the storage condition of the croakers, both the yellow and white croakers showed a gradually increasing trend of hardness when stored at $5^{\circ}C$ and $15^{\circ}C$.

• Science of Emotion and Sensibility
• /
• v.19 no.2
• /
• pp.101-112
• /
• 2016

Selecting appropriate materials can be significantly important to make different image in the product and also give distinguished express to the users. A material for the ceramic product surface consists of the combination between a glaze and a body, and each attribution of materials and the way of the combination creates different texture and color. This study analyzes the difference between visually and tactually sensibility of ceramic surface to through the simulating both visual and tactual stimulation by verbal evaluation method. Totally 13 adjectives are selected from homepage of local and global ceramic product brand. And totally 12 ceramic samples are created with the consideration of color, glossiness and roughness. These 12 samples are the combination between four ceramic bodies (White porcelain, Celadon_c, Sancheong and Black soil) and three glazes (Transparent, Celadon_g, Black glaze). The respondents of first survey were asked to rub, touch and hold before evaluating the sensibility of ceramic surface and other respondents of second survey were asked to evaluate visual images of 9 samples which showed meaningfully difference from first survey. The surface which scored the highest sensibility with the first survey was 'pure' on a surface of White porcelain body with Transparent glaze, and the lowest was also 'pure' on a surface of Black soil body with Transparent glaze. The highest score in the second survey was the same result as the first survey, but the lowest scored 'casual' and the surface was Black soil body with Celadon glaze. By the comparison with two survey results, not every sensibility is same result shown as the first survey and the second survey, but the tactile sensibilities such as 'artistic', 'luxurious', 'sensuous', 'romantic' and 'mysterious' can be experienced by via visual materials of ceramic surfaces.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.2
• /
• pp.128-136
• /
• 2009

To obtain pure lines for breeding $F_1$ varieties of spreading surfinia and wave petunia, Petunia ${\times}$ hybrida, 20 lines of surfinia petunia and 28 lines of wave petunia that were considered uniform in growth and flowering characteristics were selected by self-pollination of the fifth($S_5$) or the seventh generation($S_7$). The 20 selected lines of surfinia petunia had the branch number ranged from 6.0 to 11.0 cm, and the internode length ranged from 2.0 to 4.2 cm. Among them, ten lines, including '$Pe99-017^7$' were above 60 cm of plant width, above 300 leaves in a plant. Fourteen lines including '$Pe99-017^7$' were more than 150 in the number of flower. In the petal color, thirteen lines, including '$Pe99-017^7$', were red-purple; three, including '$Pe99-007^7$', were purple; '$Pe04-086^7$' and '$Pe04-159^7$' were violet; and line '$Pe072-1^7$' was white. Eight lines including '$Pe02-205-2^5$' ranged from 4.0 to 5.0 cm of flowers diameter, and seven lines including '$Pe04-086^5$' ranged from 3.0 to 4.0 cm of leaf length, which is relatively low. Germination rate of the lines was more than 50%. In the wave petunia, the branch number of the 28 selected lines ranged from 8.0 to 13.0 cm, and the internode length ranged from 1.0 to 3.2 cm, which is relatively higher than surfinia petunias. Among them, ten lines, including '$Pe99-020^7$' were above 60 cm of plant width, above 200 leaves in a plant. Twelve lines including '$Pe04-034-2^5$' were more than 150 in the number of flower. In the petal color, eighteen lines, including '$Pe99-020^7$', were red-purple; three, including '$Pe04-113-4^5$', were red; three, including '$Pe04-263^5$', were white; '$Pe04-201^5$' and '$Pe04-263^5$' were violet blue; and line '$Pe04-072-5^5$' was purple. Nine lines including '$Pe04-201^5$' ranged from 4.0 to 5.0 cm of flowers diameter, and eleven lines including '$Pe04-263^5$' ranged from 3.0 to 4.0 cm of leaf length, which is relatively low. All the lines with various growth and flowering characteristics would be very promising to use as breeding materials for $F_1$ hybrids of spreading petunia, Petunia ${\times}$ hybrida.

• Korean Journal of Plant Resources
• /
• v.32 no.5
• /
• pp.486-498
• /
• 2019

This study was conducted to investigate the leaf growth and flowering characteristics of 85 Hosta cultivars. The 85 cultivars were grown in a pot in Useful Plant Resources Center in Yangpyeong, Korea. H. 'Abiqua Blue Crinkles', H. 'Abiqua Drinking Gourd', H. 'Dancing in the Rain', H. 'Elegance', H. 'Inniswood', and H. 'Venus' were classified as a large size group (> 50 cm), while 27 cultivars including H. 'Abby', H. 'Birchwood Parky's Gold', H. 'Blue Cadet', and H. 'Blue Edge' were classified as a small size group (< 20 cm). The others were classified as a medium size groups. 79% of Hosta cultivars had leaf variegation. Leaf variegation type was divided into 5 types (standard, marginata, mediovarigata, albomaculata, striata). Among them 31 cultivars including H. 'Abby', H. 'Abiqua Moonbeam', and H. 'Atlantis' has a variegation type of marginata in the leaf. 36 cultivars including H. 'Abby', H. 'Abiqua Drinking Gourd', and H.'Abiqua Moonbeam' bloomed in late May and 9 cultivars including H. 'Black Hills', H. 'Boeun', and H. 'Fragrant Bouquet' started to flower on late August. Most flowers were below 3.0 cm in length, while H. 'Avocado' was longest on 10.0 cm. Most flowers have a lavender color group (63.5%), and 14 cultivars of Hosta showed white color group (16.5%). 12 cultivars including H. 'Blue Mouse Ears', H. 'Captain Kirk', and H. 'Fragrant Bouquet' had the fragrance in their flowers. H. 'Cherry Berry' and H. 'Revolution' had a colorful stalk, red and yellow, respectively.