• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.399-405
• /
• 1997

With the increase of ZnO content, heat of hydration decreased. For specimens containing ZnO more than 0.6 wt.%, the compressive stength of cement cured for 28 days could not be measured because setting was not occurred. With the increase of ZnO content, Blaine specific surface area of cement was decreased and the residue of 45 ${\mu}{\textrm}{m}$ and 90 ${\mu}{\textrm}{m}$ was increased when cement was ground. That is, grindability became worse as ZnO increased in clinker. The difference of color as a function of ZnO content could not be observed, but in the excess of amount of ZnO added, color became more white and reddish yellow.

• 한국세라믹학회지
• /
• 제24권3호
• /
• pp.282-288
• /
• 1987

Diffusion of Cl- ion in hardened cement paste with slag and siliceous powder such as silica fume and white carbon was investigated. The addition of admixtures reduces the content of Ca(OH)2, which is the main cause of pore formation by corrosive action of sea-water. The addition of admixtures makes the hardened cement paste dense, thereby restricting the diffusion of Cl- ion and improving the resistance to sea-water. Apparence diffusion coefficient of Cl- ion in hardened ordinary portland cement paste was 3.7${\times}$10-8$\textrm{cm}^2$/sec, while that for the hardened cement paste with the admixture was 1.2∼3.2${\times}$10-8$\textrm{cm}^2$/sec.

• 콘크리트학회지
• /
• 제6권5호
• /
• pp.149-157
• /
• 1994

보통 포틀랜드 시멘트와 수용성 고분자 물질인 hydroxy propyl methyl cellulose(HPMC), 미세골재 및 혼화재료를 사용하여 W/C=0.1이 되도록 물을 첨가하고 twin roll mill로 혼합 성형한 후 60일간 양생하여 고강도 시멘트 경화체를 제조하였다. 이 경화체에 대한 휨강도 및 파괴인성을 검토하였다. SiC 분말 및 백색시멘트를 첨가한 경우 휨강도는 약 100MPa정도, 탄성계수는 80-95GPa의 값을 나타내었다. 실리카흄을 첨가한 경우 휨강도는 80MPa, 탄성계수는 60GPa의 값을 나타내었다.

• Advances in concrete construction
• /
• 제6권3호
• /
• pp.285-296
• /
• 2018

In the present paper, the results of an experimental study of the bond between repair materials and mortar substrate subjected to hot climate is presented. Half-prisms of size $40{\times}40{\times}80mm$, serving as a substrate mortar samples (SUBM) were manufactured in the laboratory and then stored at an ambient temperature for 6 months. Five self compacting mortar mixes (SCMs) incorporating 0%, 10%, 20%, 30%, and 40% of natural pozzolana as white cement replacement were used as repair materials. Repaired composite samples (SCMs/SUBM) were cured at hot climate for different lengths of time (28 and 56-days). During the first week of curing, the composite samples were watered twice a day. The test carried out to assess the bond between SCMs and SUBM was based on three-point bending (3 PB) test. The obtained results have proved that it was feasible to produce compatible repair materals in this curing environment by using up to 30% natural pozzolana as white cement replacement.

• Restorative Dentistry and Endodontics
• /
• 제33권4호
• /
• pp.369-376
• /
• 2008

이 연구의 목적은 3 종의 포틀랜드 시멘트 (포틀랜드 시멘트, 백색 포틀랜드 시멘트, 초속경 시멘트)와 white MTA의 성분 및 세포독성을 비교하는 것이다. 성분비교를 위해서 X선 회절기 (XRD), X선 형광분석기 (XRF), 유도결합플라즈마 원자방출분광 분석기 (ICP-AES)를 사용하였으며, 세포독성비교를 위해서는 우무확산법 (agar diffusion test)을 사용하였다. 분석 결과, white MTA와 백색 포틀랜드 시멘트는 포틀랜드 시멘트나 초속경 시멘트에 비해 적은 양의 마그네슘 (mg), 철 (Fe), 아연 (Zn), 그리고 망간 (Mn)을 함유하고 있었다. 또한 초속경 시멘트는 다른 시멘트 및 white MTA에 비해 많은 산화 알루미늄 ($Al_2O_3$)을 함유하고 있었다. MTA와 포틀랜드 시멘트의 주된 성분은 tricalcicium silicate ($3CaO{\cdot}SiO_2$), dicalcium Silicate ($2CaO{\cdot}SiO_2$), tricalcium aluminate ($3CaO{\cdot}Al_2O_3$), 그리고 tetracalcium aluminoferrite (4CaO{\cdot}Al_2O_3{\cdot}Fe_2O_3)등이었다 세포독성 실험결과를 Kruskal-Wallis Exact test와 Bonferroni 사후 검정법을 사용하여 분석 한 결과 white MTA와 3 종의 포틀랜드 시멘트 군 사이에서 통계적으로 유의성 있는 차이를 보이지 않았다 (p > 0.05). White MTA와 3종의 포틀랜드 시멘트의 주성분은 유사하였으나 알루미늄 (Al), 마그네슘 (mg), 철 (Fe), 아연 (Zn), 그리고 망간 (Mn) 등의 함량에서는 차이를 보였으며 이러한 차이들은 물리적 성질에 영향을 미칠 것으로 보인다.

• Restorative Dentistry and Endodontics
• /
• 제34권3호
• /
• pp.192-198
• /
• 2009

이번 연구는 치근 천공의 치료 재료인 white mineral trioxide aggregate (MTA)를 흔히 사용되는 calcium hydroxide liner ($Dycal^{(R)}$), glass ionomer cement (GIC), 그리고 MTA와 유사한 성분을 가진 Portland cement와 세포독성 실험으로 생체 친화성을 평가하는 것이다. 세포독성의 정도는 MG-63 세포를 이용해 주사전자 현미경적 관찰과 수용성 tetrazolium salt를 이용한 흡광도를 측정 (XTT assay)하여 평가하였다. SEM 관찰에서, 1일과 3일째 모두에서 GIC와 MTA, Portland cement 표면에서는 잘 부착된 세포를 보여주었다. 반면에, Dycal 표면의 세포들은 둥글고 부착되지 않은 양상을 보여 주었다. XTT assay에서는 Dycal을 제외한 모든 재료에서 유사하게 높은 세포 활성도를 보여주었으며, 이는 SEM 관찰 소견과 일치하였다. 이번 연구는 MTA가 생체친화적인 재료라는 견해를 뒷받침한다. 또한 Portland cement와 GIC에서도 MTA와 유사한 세포반응을 보여주었다.

• International Journal of Concrete Structures and Materials
• /
• 제9권4호
• /
• pp.427-438
• /
• 2015

The present work proposes a new image analysis method for the evaluation of the multi-walled carbon nanotube (MWNT) distribution in a cement matrix. In this method, white cement was used instead of ordinary Portland cement with MWNT in an effort to differentiate MWNT from the cement matrix. In addition, MWNT-embedded cement composites were fabricated under different flows of fresh composite mixtures, incorporating a constant MWNT content (0.6 wt%) to verify correlation between the MWNT distribution and flow. The image analysis demonstrated that the MWNT distribution was significantly enhanced in the composites fabricated under a low flow condition, and DC conductivity results revealed the dramatic increase in the conductivity of the composites fabricated under the same condition, which supported the image analysis results. The composites were also prepared under the low flow condition (114 mm < flow < 126 mm), incorporating various MWNT contents. The image analysis of the composites revealed an increase in the planar occupation ratio of MWNT, and DC conductivity results exhibited dramatic increase in the conductivity (percolation phenomena) as the MWNT content increased. The image analysis and DC conductivity results indicated that fabrication of the composites under the low flow condition was an effective way to enhance the MWNT distribution.

• 한국세라믹학회지
• /
• 제31권3호
• /
• pp.330-336
• /
• 1994

High strength cement composites (W/C=0.1) were prepared by using various blending materials such as SiC whisker and white carbon (hydrated silica: SiO2·nH2O). The effect of various blending materials on the microstructure and strength of the hardened cement paste were investigated in the view of fracture mechanics. The plain specimen showed 101 MPa of flexural strength, 81 GPa of Young's modulus and 1.32 MPam1/2 of fracture toughness. When the blending materials were added to the composites, their values were enhanced to about 110∼138 MPa, 95∼146 GPa and 1.32∼1.87MPam1/2 respectively. The improvement of the mechanical strength for the hardened cement paste may be due to the removal of macropores, the reduction of total porosity, pozzolanic reaction and the increase of various fracture toughening effect.

• 대한화학회지
• /
• 제65권6호
• /
• pp.415-418
• /
• 2021

• 한국폐기물자원순환학회지
• /
• 제35권8호
• /
• pp.721-730
• /
• 2018

We investigated the effects of heavy metals in cement in the last 3 years and the amount of waste in the cement manufacturing process. The result shows that the average $Cr^{6+}$ content in cement products is controlled at 10 mg/kg. Cu and Pb have lower detection tendency in white cement than in ordinary portland cement. In addition, heavy metals such as Cd show a certain level of detection regardless of the input wastes. Copper slag and phosphate gypsum are the main influencing factors on the heavy metals in cement products. In auxiliary fuels, plastics waste and wood waste are considered to affect heavy metals in cement products. Alternative raw materials are considered to be affected by the alternative raw materials managed as byproducts. In the case of supplementary fuels, auxiliary fuels managed as waste instead of auxiliary fuels managed as byproducts affect the heavy metals in cement. This study examined the input amount without considering the heavy metals in each waste. Therefore, the result may vary in different situations, and further research must be conducted to supplement the findings. However, if the heavy-metal contents in the waste are constant, it can be used as a reference material for the control of heavy metals in cement products.