• Korean Journal of Rural Living Science
• /
• 제4권1호
• /
• pp.9-12
• /
• 1993

• Journal of Biosystems Engineering
• /
• 제3권2호
• /
• pp.88-99
• /
• 1978

In this study, rice harvesting systems suitable to Korean situations and the optimum timing of these systems were determined, respectively, based on experimentally determined factors such as filed yield and the milling quantity and quality measured at various levels of the grain moisture content at harvest. Rice varieties used for the experiment were the AKIBARE (Japonica-type) and the SUWEON 251 (high yielding TONGIL sister-line variety), The harvesting systems studied by the experimental work of this study were traditional system with both the wet material and dry-material threshing system by use of binder with both the dry-material and wet-material threshings, and system by use of combine. Grain samples were taken from final products of the paddy rice harvested from the experiment a fields for each system to measure the recovery rates of the milled rice. The results may be summarized as follows; 1. The milling recovery rate of the AKIBARE variety had highest value within the range of the grain moisture at harvest, showing from 21 to 26 percent. The head-rice recovery for the same variety was a little greater in the wet-material threshing than in the dry-material threshing , higher values of which , were 20 to 25 percent , seen within the range of grain moisture at harvest regardless of the harvesting systems tested. 2. The milling recovery of the SUWEON 251 , when tested for different harvesting systems and harvesting grain moisture, did not show a statistically significant different. In contrast , head-rice recovery for the systems operated by the wet-material threshing was much greater than that by the -material threshing. The difference of the recoveries between these systems range from 2.6 to 4.7 percent. 3. An assessment of the optimum period of -harvest timing for each of the harve\ulcornersting systems tested were made bJ.sed on (a) the maximum total milled-rise yield and (b) the percentage reduction in the total milled-rice yield due to untimely harvest operations. The optimum period determined are: 23-19% for the ATD, AC, STD, SBW, STW systems, 25-21% for the ATW ani ABW systems, and 27-18% for the ABD, SBD, and SC systems, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제40권12호
• /
• pp.1797-1801
• /
• 2011

Two brown rice samples differing in amylose content, 20.1 (normal) and 7.3% (low amylose) were milled by different milling methods, and their physicochemical properties were tested. Particle size of brown rice flour prepared by dry milling using a pin mill (DM) was lower than that prepared by wet milling using a roll mill (WM). Particle size was further reduced by successive dry milling of the flour after wet milling and drying (WM/DM). Damaged starch contents in the wet milled brown rice flour were 14.6 and 15.6% for the normal and low amylose samples, respectively, whereas they were only 4.2 and 4.8% for the dry milled samples. WM/DM method resulted in a lower damaged starch (%) than DM, despite a reduced flour particle size. Water absorption index (WAI) of the brown rice flour was the lowest after WM/DM, and the water solubility index (WAI) was higher in the order of DM, WM/DM, and WM. Brown rice flour with normal amylose content appeared to have significantly higher pasting viscosities, as determined using a Rapid Visco Analyzer (RVA). Compared to dry milled brown rice flour, wet milled brown rice flour showed lower peak viscosity and higher final viscosity, resulting in increased setback value.

• Food Science and Biotechnology
• /
• 제16권5호
• /
• pp.759-764
• /
• 2007

To investigate the effect of soaking and particle sizes on the properties of rice flour and gluten-free rice bread, wet-milled (WRF, dried at $20^{\circ}C$) and dry-milled rice flours (DRF) were passed through sieves (45 or 100 mesh). Soaking of the rice grains affected the particle size distribution of flour passed through the same size screen. The L and b values of WRF were higher than those of DRF and were not changed with decreasing particle sizes, but DRF increased L and decreased b values. The initial pasting temperatures and setback viscosities of both flours decreased with decreasing particle sizes. The swelling powers at $100^{\circ}C$ increased with decreasing particle sizes in DRF, but maintained in WRF. Starch granules were observed on the surface of flour particles in WRF. The apparent viscosity of WRF paste exhibited 3-5 times higher than that of DRF. Thus, wet milled rice flour with smaller particle sizes (${\phi}<150\;{\mu}m$) showed better properties for making gluten-free rice bread.

• Proceedings of the Korean Nuclear Society Conference
• /
• 한국원자력학회 2001년도 추계학술발표회요약집
• /
• pp.222.2-222
• /
• 2001

• Journal of the Korean Society of Food Culture
• /
• 제36권5호
• /
• pp.492-501
• /
• 2021

This study investigated the physicochemical properties and acceptability of yellow layer cake prepared using various levels of wet-milled rice flour (RF). RF was used to substitute 0% (control group), 15% (RF-15 group), 30% (RF-30 group) and 45% (RF-45 group) of wheat flour (WF) to manufacture yellow layer cakes. The substitution of WF with RF showed no significant effect on the pH but decreased the specific gravity and viscosity of the batter. Baking loss rates ranged from 4.65% to 5.03%, showing no significant difference among samples. In the color measurement, the experimental groups showed higher redness (a) and yellowness (b) than the control group (p<0.05). The experimental groups showed lower gumminess and chewiness than the control group. According to the results of intensity measurement of sensory properties, the RF-30 and RF-45 groups showed stronger intensities for darkness, sweetness, moistness and softness than the control group. The acceptance test found that the RF-45 group had significantly higher or similar results for all acceptance attributes than the control group. These results indicate that RF addition as a replacement of WF at a ratio of 45% is optimal for producing yellow layer cakes.

• The Korean Journal of Food And Nutrition
• /
• 제25권3호
• /
• pp.637-643
• /
• 2012

This study was performed to increase the utilization of rice and improve the productivity of jochung, traditional food in Korea. Two kinds of jochung products were prepared from steamed rice(SR) and wet-milled rice flour(WRF) by rice cultivated from 2006 to 2010. It is common to add a liquefying enzyme for rice liquefaction(4 $m{\ell}$/1,000 g rice, at $90{\sim}95^{\circ}C$, 3 h) and saccharogenic enzyme with malt(45 g/1,000 g rice, at $55{\sim}57^{\circ}C$, 6 h). In order to evaluate the quality characteristics of jochung, producing rate, pH, solidity, reducing sugar, dextrose equivalence(D.E.), viscosity, total phenolic compound, color value and sensory evaluation were carried out. In terms of the producing rate of jochung, WRF jochung was produced about 7.4% much more than SR jochung. There was no difference in producing rate between the jochung cultivated from 2006 to 2010 rice. The pH varied from 4.86~5.66, solidity was 79.48~82.28%. Color L value was 25.82~27.92, a value of 1.28~2.81, b value were 2.98~4.33. The results of sensory evaluation for jochung, as a whole, received higher score than for the commercial product(Daesang Co., Ltd, Seoul, Korea), overall acceptability score was the highest in the 2008SR. Reducing sugar, dextrose equivalence(D.E.) and total phenolic compounds were determined to be higher WRF jochung than SR jochung, while viscosity was lower WRF jochung than SR jochung. These results are thought to be due to increased surface area of rice by milling. SR jochung manufacturd by wet-milled rice flour will increase the producing rate for jochung, thereby saving manufacturing time and costs.

• Food Science and Preservation
• /
• 제22권2호
• /
• pp.174-181
• /
• 2015

This study investigated the physicochemical properties of three different types of rice flour prepared via dry and wet milling. The powder, soft, and hard-types of rice flour were Suwon No. 542, Suwon No. 541, and Unbong No. 30, respectively. The analysis of the proximate compositions of the different types of rice flour showed that their moisture content was 7.03~7.99%, their crude protein was 7.94~8.35%, their crude lipid was 0.71~1.49% and their crude ash was 0.25~0.82%. For the Hunter's color values, the L value was highest in the wet-milled rice flour, the a value was highest in the dry-milled rice flour, and the b value was highest in the dry-milled rice flour. All the samples showed distinctive rice starch particles in the particle analysis using scanning electron microscope. The dry-milled rice flour showed the greatest amount of irregular particles and the coarsest texture. The water absorption and water solubility indices were higher in the wet-milled soft- and hard-type rice flour. The crystallinities of the samples by X-ray diffractography were all A-type, but the crystallinity of the dry-milled hard-type rice flour was higher in diffraction degree. For the amylogram properties, the wet-milled soft-type rice flour showed the highest maximum viscosity, breakdown and setback. In the meanwhile, the dry-milled soft-type rice flour showed the highest initial pasting temperature, onset, peak, and end temperatures despite of the reverse enthalpy.

• Korean journal of food and cookery science
• /
• 제26권6호
• /
• pp.727-736
• /
• 2010

The purpose of this research was to compare the physicochemical compositions and morphological properties of five varieties of rice flours (RR, RGD, RSGD, RWDG, RWGD). RR was raw milled rice without washing, RGD was raw rice flour without soaking, RSGD was raw milled rice flour with 0 hr of soaking, RWDG was raw rice flour with 8 hr of soaking and grinding after drying, and RWGD was raw rice flour with 8hr of soaking and drying after grinding. The protein and lipid contents of wet milling rice flour (RSGD, RWDG, RWGD) were significantly lower than those of dry milling rice flour (RR, RGD). L and a values were significantly increased in wet milling rice flour, and b value was significantly increased in dry milling rice flour. Scanning electron microscopy (SEM) showed that RWDG and RWGD were distributed as separated fine particles in rice flours. The WBC of RWDG and RWGD were higher than those of other rice flours. Solubility was significantly increased according to the temperature, and swelling power of RWDG was higher than that of other rice flours at 50 and $60^{\circ}C$. Using RVA, the initial pasting temperature and setback of RWDG were lower and the peak viscosities of RSGD and RWDG were higher than those of other rice flours. Using a mixograph, peak times were not significantly different among the groups, wheras peak heights were significantly decreased in RSGD, RWDG, and RWGD. The peak width of RWGD was lower than those of other rice flours. Based on these findings, RWDG flour was less damaged, and had a lower setback and pasting temperature, which makes it an appropriate rice flour for commercial mass production.

• 연구논문집
• /
• 통권29호
• /
• pp.131-139
• /
• 1999

The effect of ball milling conditions in the milling of aluminium foil scraps was studied. Initial foil thickness, ball size. content of oleic acid. weight ratio of mineral spirits/foil. charged amount of foil were varied in wet ball milling process. It is impossible to make flake powders by milling of foil scraps with thickness $120 \mum$. As foil thickness decreases from $60\mum$ to $6.5\mum$, Mean size of powder milled for 30 h decreases from 107 µm to 17 µm. Bigger ball is slightly beneficial for milling of foils to the flake powders due to the larger impact energy produced by them. It is impossible to mill the foil without oleic acid to fabricate the flake powder. As content of oleic acid increases from 1.5 % to 5 %, mean size of flake powder milled for 30 h is drastically decreased. For the mineral spirits content below 50 %, foil scrap was not milled because sliding motion of balls by lubricant effect between balls and wall of container. As weight ratio of mineral spirits and foil increase over 100 %, foils were milled powders with mean powder size 15 - 20 때 irrespective of mineral spirits content due to reduced lubricant effect. As charged amount of foil decreases, mean powder size decreases due to increased collision frequency between ball and foil.