DOI QR코드

DOI QR Code

Physicochemical Properties of Brown Rice Flours Differing in Amylose Content Prepared by Different Milling Methods

아밀로오스 함량이 다른 현미의 제분방법별 이화학적 특성

  • Lee, Young-Tack (Dept. of Food Science and Biotechnology, Kyungwon University) ;
  • Kim, Yeon-U (Dept. of Food Science and Biotechnology, Kyungwon University)
  • 이영택 (경원대학교 식품생물공학과) ;
  • 김연우 (경원대학교 식품생물공학과)
  • Received : 2011.10.14
  • Accepted : 2011.10.25
  • Published : 2011.12.31

Abstract

Two brown rice samples differing in amylose content, 20.1 (normal) and 7.3% (low amylose) were milled by different milling methods, and their physicochemical properties were tested. Particle size of brown rice flour prepared by dry milling using a pin mill (DM) was lower than that prepared by wet milling using a roll mill (WM). Particle size was further reduced by successive dry milling of the flour after wet milling and drying (WM/DM). Damaged starch contents in the wet milled brown rice flour were 14.6 and 15.6% for the normal and low amylose samples, respectively, whereas they were only 4.2 and 4.8% for the dry milled samples. WM/DM method resulted in a lower damaged starch (%) than DM, despite a reduced flour particle size. Water absorption index (WAI) of the brown rice flour was the lowest after WM/DM, and the water solubility index (WAI) was higher in the order of DM, WM/DM, and WM. Brown rice flour with normal amylose content appeared to have significantly higher pasting viscosities, as determined using a Rapid Visco Analyzer (RVA). Compared to dry milled brown rice flour, wet milled brown rice flour showed lower peak viscosity and higher final viscosity, resulting in increased setback value.

아밀로오스 함량에 차이가 있는 일반 멥쌀 현미(아밀로오스 20.1%)와 저아밀로오스 현미(아밀로오스 7.3%)를 제분 방법을 달리하여 현미가루로 제조한 후 제분방법별 현미가루의 이화학적 특성을 비교 조사하였다. Pin mill로 건식제분 한 현미가루의 입자크기가 수침후 roll mill에 의해 습식제분 한 현미가루에 비해 작았고 입자크기는 습식제분 하여 건조한 현미가루를 2차 건식 재분쇄하는(습식/건식) 제분방식에 의해 더 감소하였다. 현미가루의 전분손상도는 건식제분 현미가루가 14.6~15.6%로 습식제분 4.2~4.8%에 비해 현저하게 높았으나 습식/건식제분이 그대로 건식제분 하는 방법에 비해 입자크기가 미세해지면서 현미가루의 전분손상도는 줄여줄 수 있는 것으로 나타났다. 현미가루의 수분흡수지수는 습식/건식 현미가루에서 가장 낮았으며 수분용해도지수는 건식>습식/건식>습식제분 순이었다. 습식제분 한 현미가루가 건식제분보다 최고점도가 낮은 반면에 paste의 최종점도는 증가하여 setback은 증가하는 경향을 보였다. 제분방법별 일반 현미가루의 평균 최고점도, trough, breakdown, 최종점도, setback이 저아밀로오스 현미가루에 비해 훨씬 높게 나타났으며 전분의 노화 정도에 서로 차이가 있을 것으로 예측되었다.

Keywords

References

  1. Bean MM. 1986. Rice flour-its functional variations. Cereal Foods World 31: 477-481.
  2. Nishita KD, Bean MM. 1982. Grinding methods; the impact on rice flour properties. Cereal Chem 59: 46-50.
  3. Chiang PY, Yeh AI. 2002. Effect of soaking on wet-milling of rice. J Cereal Sci 35: 85-94. https://doi.org/10.1006/jcrs.2001.0419
  4. Choi EJ, Kim HS. 1997. Physicochemical and gelatinization properties of glutinous rice flour and starch steeped at different conditions. J Korean Soc Food Sci Nutr 26: 17-24.
  5. Kim WS, Shin M. 2007. The properties of rice flours prepared by dry- and wet-milling of soaked glutinous and normal grains. Korean J Food Cookery Sci 23: 908-918.
  6. Kim SK, Bang JB. 1996. Physicochemical properties of rice affected by steeping conditions. Korean J Food Sci Technol 28: 1026-1032.
  7. Kim MH, Park MW, Park YK, Jang MS. 1993. Physicochemical properties of rice flours as influenced by soaking time of rice. J Korean Soc Food Sci Nutr 9: 210-214.
  8. Lin PY, Lai HM. 2011. Bioactive compounds in rice during grain development. Food Chem 127: 86-93. https://doi.org/10.1016/j.foodchem.2010.12.092
  9. Liu RH. 2007. Whole grain phytochemicals and health. J Cereal Sci 46: 207-219. https://doi.org/10.1016/j.jcs.2007.06.010
  10. Renzetti S, Arendt EK. 2009. Effect of protease treatment on the baking quality of brown rice bread: from textural and rheological properties to biochemistry and microstructure. J Cereal Sci 50: 22-28. https://doi.org/10.1016/j.jcs.2009.02.002
  11. Lee MH, Oh MS. 2006. Quality characteristics of cookies with brown rice flour. Korean J Food Culture 21: 685-694.
  12. Lee WJ, Jun JK. 2002. Quality characteristics and preparation of noodles from brown rice flour and colored rice flour. Korean J Culinary Research 8: 267-278.
  13. AACC. 2000. Approved methods of the AACC. 10th ed. American Association of Cereal Chemists, St. Paul, MN, USA.
  14. Anderson RA. 1982. Water absorption and solubility and amylograph characteristics of rolled-cooked small grain products. Cereal Chem 59: 265-271.
  15. Chen JJ, Lu S, Lii CY. 1999. Effect of milling on the physicochemical characteristics of waxy rice in Taiwan. Cereal Chem 76: 796-799. https://doi.org/10.1094/CCHEM.1999.76.5.796
  16. Kum JS, Lee SH, Lee HY, Kim KH, Kim YI. 1993. Effect of different milling methods on distribution of particle size of rice flour. Korean J Food Sci Technol 25: 541-545.
  17. Kum JS, Lee HY. 1999. The effect of the varieties and particle size on the properties of rice flour. Korean J Food Sci Technol 31: 1542-1548.
  18. Kim RY, Kim CS, Kim HY. 2009. Physicochemical properties of non-waxy rice flour affected by grinding methods and steeping times. J Korean Soc Food Sci Nutr 38: 1076-1083. https://doi.org/10.3746/jkfn.2009.38.8.1076
  19. Park YK, Seog HM, Nam YJ, Shin DW. 1988. Physicochemical properties of various milled rice flours. Korean J Food Sci Technol 20: 504-510.
  20. Park JD, Choi BK, Kum JS, Lee HY. 2006. Physicochemical properties of brown rice flours produced under different drying and milling conditions. Korean J Food Sci Technol 38: 495-500.
  21. Kim SS, Kim YJ. 1995. Effect of moisture content of paddy on properties of rice flour. Korean J Food Sci Technol 27: 690-696.
  22. Kim KA. 1996. Physicochemical properties of nonwaxy and waxy brown rice flour. Korean J Soc Food Sci 12: 557-561.

Cited by

  1. Studies of Physicochemical Properties of Baby Powder Developed from Rice-flour vol.23, pp.7, 2013, https://doi.org/10.5352/JLS.2013.23.7.879
  2. Starch Structure and Physicochemical Properties of Colored Rice Varieties vol.61, pp.3, 2016, https://doi.org/10.7740/kjcs.2016.61.3.153
  3. Quality Characteristics of Seasoning with Different Particle Size of Hericium erinaceus Powder vol.29, pp.6, 2013, https://doi.org/10.9724/kfcs.2013.29.6.741
  4. Impact of Milling Method on Quality Parameters of Waxy Sorghum Flour vol.29, pp.2, 2013, https://doi.org/10.9724/kfcs.2013.29.2.129
  5. Physicochemical Characteristics of the Sorghum(Sorghum bicolor L. Moench) Powder following Low Temperature-Microparticulation vol.25, pp.3, 2012, https://doi.org/10.9799/ksfan.2012.25.3.656
  6. Agronomic and genetic analysis of Suweon 542, a rice floury mutant line suitable for dry milling vol.6, pp.1, 2013, https://doi.org/10.1186/1939-8433-6-37
  7. Changes in physicochemical characteristics and antioxidant activities of Jerusalem artichoke tea infusions resulting from different production processes vol.23, pp.6, 2014, https://doi.org/10.1007/s10068-014-0257-3
  8. 현미 도정과정에 따른 살균제 Hexaconazole, Tricyclazole 및 살충제 Etofenprox, Imidacloprid 잔류량 변이 vol.21, pp.3, 2011, https://doi.org/10.7585/kjps.2017.21.3.324
  9. 품종 및 입자크기별 건식 쌀가루를 이용한 증편의 품질 특성 vol.33, pp.6, 2018, https://doi.org/10.7318/kjfc/2018.33.6.588
  10. The use of floury endosperm mutants to develop rice cultivars suitable for dry milling vol.14, pp.2, 2011, https://doi.org/10.1007/s11816-020-00604-x
  11. Storage characteristics of two‐spotted cricket ( Gryllus bimaculatus De Geer) powder according to drying method and storage temperature vol.50, pp.11, 2020, https://doi.org/10.1111/1748-5967.12472