• Corrosion Science and Technology
• /
• v.13 no.6
• /
• pp.214-223
• /
• 2014

Interest in the durability assessment and structural performance has increased according to an increase of concrete structures in salt damage environment recent years. Reliable way ensuring the most accelerated corrosion test is a method of performing the rebar corrosion monitoring as exposed directly to the marine test site exposure. However, long-term exposure test has a disadvantage because of a long period of time. Therefore, many studies on reinforced concrete in salt damage environments have been developed as alternatives to replace this. However, accelerated corrosion test is appropriate to evaluate the critical chlorine concentration in the short term, but only accelerated test method, is not easy to get correct answer. Accuracy of correlation acceleration test depends on the period of the degree of exposure environments. Therefore, in this study, depending on the concrete mix material, by the test was performed on the basis of the composite degradation of the salt damage, and investigate the difference of corrosion initiation time of the rebar, and indoor corrosion time of the structure, of the marine environment of the actual environments were inuestigated. The correlation coefficient was derived in the experiment. Long-term exposure test was actually conducted in consideration of the exposure conditions submerged zone, splash zone and tidal zone. The accelerated corrosion tests were carried out by immersion conditions, and by the combined deterioration due to the carbonation and accelerated corrosion due to wet and dry condition.

• Journal of the Korean Society for Railway
• /
• v.9 no.4 s.35
• /
• pp.349-356
• /
• 2006

At present, the selecting system and analytic estimation criterion on repair materials and methods of the deteriorated RC structures have not yet been set up in domestic. Under these circumstances, deterioration such as shrinkage crack, corrosion of rebar has been often occurred after repair, and this finally results in too frequent repairs. In this study, three types of repair methods were experimentally investigated by the accelerating test in a combined deterioration chamber and long-term field exposure test. Three types of repair methods applied in this study belong to a group of polymer cement mortar, which is commonly used in repair works. According to the results of this study, durability of repair mortar layers and corrosion properties of recovered rebar could be investigated in short period by the accelerating test in a combined deterioration chamber, which can simulate the condition of repeated high-and-low temperature and repeated dry-and-wet environment, spraying chloride solution and emitting $CO_2$ gas. After 36 month long-term filed exposure test in the coastal area, harmful macro-cracks are observed in the polymer cement mortar layer of some repair methods. These crack are considered to result from drying shrinkage of polymer cement mortar. Also, after 36 month exposure, amount of corrosion area and weight loss of rebar are found to be different according to the types of repair methods.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.522-525
• /
• 2003

Mine waters, surface waters and groundwaters were sampled around seven Au-Ag mine areas (Dongil, Okdong, Dongjung, Songcheon, Ssangjeon, Dogok and Gubong Au-Ag mines). The main contamination sources of As in these abandoned Au-Ag mines can be suggested as mine tailings and waste rocks including the sulfide gangue minerals (arsenopyrite). The relatively high concentration of As in mine waters was shown in the Dongil (524 ${\mu}g/L$) and the Dogok (56 ${\mu}g/L$) mine areas. Arsenic concentrations in stream waters from the Dongil ($0.9\~118{\mu}g/L$), the Songchon ($0.8\~63{\mu}g/L$), the Ssangjeon ($1.6\~109{\mu}g/L$) and the Gubong ($3.6\~63{\mu}g/L$) mine areas exceeded the permissible level for stream water in Korea. Groundwaters collected from the Dongil ($0.9\~64{\mu}g/L$ ), the Okdong ($0.2\~69{\mu}g/L$) and the Gubong ($0.5\~101{\mu}g/L$) mine areas contained high As concentration to cause the arsenicosis in these areas. In As speciation, the concentration ratios of As(III) to As(total) present up to $75\%$ and $100\%$ in stream waters from the Okdong and the Songcheon mines, and $70\%$ in groundwaters from the Okdong and the Dongjung mines. Arsenic concentration decreases downstream from the tailing dump correlatively with pH and Fe concentration. Highly elevated As concentrations are found in the dry season (such as April and March) than in the wet season (September) due to the dilution effect by heavy rain during summer in stream waters from the Dongil and the Songcheon mine areas.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.2 s.150
• /
• pp.255-265
• /
• 2006

The purpose of this study was to examine the dyeing properties of four kinds of composite yams that were twisted in different processes. The composite yarns consist of acetate and functional polyester in ratio of 70 : 30. The composite yams were dyed at 100$^{circ}C$ and 125$^{circ}C$ using three types of dyes, disperse dyes for acetate fiber, PET fiber and PET-acetate blended fiber, in the three primary colors. The exhaustion($\%$) and K/S value were observed for each case. Also the effects of four different twisting processes to dyeing properties and physical properties were examined. Regardless of twisting methods, the composite yarns that were dyed at 125$^{circ}C$ had higher exhaustion($\%$) than those were dyed at 100$^{circ}C$ with all three types of dyes; However, tendency of the K/S value after reduction cleaning process was measured at 100$^{circ}C$ and the value measured 125$^{circ}C$ had a great difference with disperse dyes for acetate and dyes for PET. The difference of the K/S values of composite yarns, when dyed at 100$^{circ}C$ and 125$^{circ}C$ with disperse dyes for PET-acetate blended fiber, was almost negligible. According to twisting methods K/S values were in the following order: AP1 > AP3 > AP4> AP2. This means that AP1, treated at 220$^{circ}C$, had the highest K/S value and K/S value becomes higher as the yam is higher twisted and becomes lower as lower twisted. On the other hand, the dry shrinkage and wet shrinkage showed low shrinkage rate when the twist was high and steam setting temperature was high.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.253-253
• /
• 2017

Recently, strong interest in the well-being and healthy food trends lead a spreading of rice processing products such as rice noodles, rice breads, and rice cakes. However, most of rice varieties developed in Korea showed very limited processing properties in processing of noodles compare to that of wheat flour. Moreover, low competitiveness as a raw processing materials due to high price give poor evaluations for rice noodles processing. To cope those barriers, 'Saemimyeon' a Tongil type high yielding variety with a high amylose contents was developed in RDA. 'Saemimyeon' showed about 10~32 % of increase in yield as 7.08MT/ha and 26.7% of high amylose contents together with easy grinding property of 65.7% of high chalkiness ratio. The both of milled as well as brown rice of 'Saemimyeon' were well fit for processing properties in rice pasta where the contents of rice flour for rice pasta was 99% (1% of Tapioka starch was intermixed in to the rice flour). A spaghetti type for wet noodles and macaroni type for dry noodles were developed, respectively. Each of pasta were showed relatively more or less an equal quality and panel test compare to that of durum wheat pasta products. Finally, rice pasta products could suggest an alternative idea for a new rice processing items where rice noodles market was stagnant.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.9-18
• /
• 2007

Soil vapor extraction (SVE) is an effective and cost efficient method of removing volatile organic compounds (VOCs) and petroleum hydrocarbons from unsaturated soils. However, soil vapor extraction becomes ineffective in soils with low gas permeability, for example soils with air permeabilities less than 1 Darcy. Incorporating PVDs in an SVE system can extend the effectiveness of SVE to lower permeability soils by shortening the air flow-paths and ultimately expediting contaminant removal. The objective of the research described herein was to effectively incorporate PVDs into a SVE remediation system. The test results show that the gas permeability was evaluated for four different equivalent diameters, increasing the equivalent diameter results in a decrease in the calculated gas permeability. It was found that the porosity for the dry condition was greater than that of the wet condition and will allow flow rate for the same vacuum flow, offering a low resistance to the air flow.

• Weed & Turfgrass Science
• /
• v.7 no.2
• /
• pp.120-129
• /
• 2018

This experiment was conducted to find the most suitable crop establishment method and weed management practices for transplanted aman rice in Bangladesh. Rice variety Bangladesh Rice Research Institute (BRRI) dhan44 was used as planting materials where three crop establishment methods ($T_1$: direct wet seeding by drum seeder; $T_2$: hand broadcasting; $T_3$: transplanting) and four weeding options ($W_1$: Hand weeding (HW); $W_2$: BRRI weeder+HW; $W_3$: Herbicide+HW; and $W_4$: no weeding) were tested. Among the crop establishment methods, the highest grain yield ($5.12t\;ha^{-1}$) was obtained with the $T_3$, while the highest benefit cost ratio (BCR) of 2.08 was found in $T_2$. In case of the weed management method, $W_1$ showed superior results on the plant $density/m^2$ (139.66) at 60 days after transplanting (DAT), grain yield ($4.97t\;ha^{-1}$), and BCR (2.03). On the other hand, the highest plant dry matter (36.20 g) at 60 DAT and the highest yield ($6.10t\;ha^{-1}$) were obtained in a $T_3W_1$ combination. The results of this study show that the productivity of rice during aman season could be most significantly increased with the use of transplanting ($T_3$) alone, hand weeding ($W_1$) alone, or a combination of the two methods ($T_3W_1$).

• The Journal of the Korean dental association
• /
• v.44 no.2 s.441
• /
• pp.115-122
• /
• 2006

Objective : The purpose of this study was to evaluate the dimensional errors between real tooth, 3D CT image and CARP model. Materials and Methods : Two maxilla and two mandible block bones with intact teeth were taken from two cadavers. Computed tomography was taken either in dry state and in wet state. After then, all teeth were extracted and the dimensions of the real teeth were measured using a digital caliper at mesio-distal and bucco-lingual width both in crown and cervical portion. 3D CT image was generated using the V-works $4.0^{TM}$ (Cybemed Inc., Seoul, Korea) software. Twelve teeth were randomly selected for CARP model fabrication. All the measurements of 3D Ct images and CARP models were made in the same manner of the real tooth group. Dimensional errors between real tooth, 3D CT image model and CARP model was calculated. Results : 1) Average of absolute error was 0.199 mm between real teeth and 3D CT image model, 0.169 mm between 3D CT image model and CARP model and 0.291 mm between real teeth and CARP model, respectively. 2) Average size of 3D CT image was smaller than real teeth by 0.149 mm and that of CARP model was smalier than 3D CT image model by 0.067mm. Conclusion : Within the scope of this study, CARP model with the 0.291 mm average of absolute eror can aid to enhance the success rate cf autogenous tooth transplantation due to the increased accuracy of recipient bone and donor tooth.

• The Korean Journal of Ecology
• /
• v.21 no.2
• /
• pp.169-174
• /
• 1998

This is the review of vegetational history of the post-glacial period in Korea. most of studies for vegetational changes are located in the lowland alluvial plain, especially below the hilly zone of western and eastern coastal regions of Korea. A couple of methods, pollen analysis and radiocarbon dating, have been employed in these studies. These results lead us to establish the pollen zonation in Korea as the followings. Yasuda et al.(1980) classified six period in Yongrang lake of sokcho. These are as follow I. 17,000-15,000yr B.P.: Picea, Abies, Pinus(Haploxylon), Larix stage, II.15,000-10,000yr B.P:Herb, Pteridophyta stage, III.10.000-6,700yr BP.:Quercus stage, IV.6,700-4,500yr B.P.:Pinus, Quercus, Carpinus stage, V.4,500-1,400yr B.P.:Quercus. Pinus stage, VI.1,400yr B.P.-present: Pinus, Herbs stage. Jo(1979) also divided the period into two stages from the outcomes of analysis done in Jumoonjin and other sites I.10,000-6,000yr B.P.:Quercus stage, II.6,000-present: Pinus-Quercus stage, and three substages: IIa.6,000-3,400 yr B.P.:lower Pinus stage, IIb.3,400-2,000yr B.P.:Pinus-Quercus stage, IIc.2,000-present: Pinus stage. Choi(1993, 1996) divided the period into three stages: I.6,000-5,000yr B.P.:Alnus, Quercus stage, II.5,000-4,000yr B.P.: Alnus, Quercus, Pinus stage, III.4,500-2,600yr B.P.: Alnus, Pinus stage. In the period around 6,000yr B.P. distinct dominant species clearly occupied the lowland of the eastern and western coasts. Thus, this strongly supports the fact that even if Korea experienced its warm and wet climate after the lateglacial, it underwent a different environmental change, dry climate, compared to the regions of Japan.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.265-275
• /
• 2003

In this study, shaking table tests were conducted to estimate dynamic interface properties between geosynthetics such as geomembrane, geotextile and geosynthetic clay liner. Accelerations of both shaking table and upper box, and relative displacements between geosynthetics under dynamic loading were measured. Also, the influence of normal stress, frequency of excitation and dry/wet conditions were investigated through the analyses of test results. from the test results, it was found that there is a limited acceleration below which dynamic farce can be transmitted between geosynthetics without the loss of horizontal acceleration. Dynamic interface friction angle between geosynthetics could be calculated through the limited acceleration. Relative displacements induced along geosynthetic interfaces under dynamic loading were not consistent depending on the type of interface and test conditions. The maximum slip displacements between geosynthetics are normalized and normalized slip equations were developed for each interface. By using the normalized slip equation, maximum slip displacements for the geosynthetic interface could be predicted for the given base acceleration and frequency of excitation.