• 한국의류산업학회지
• /
• 제6권4호
• /
• pp.492-496
• /
• 2004

Shrinkage properties of drawn textured Poly(trimethylene terephthalate, PTT) yarn, which has been developed recently, were investigated to provide fundamental information for the textile industry. Shrinkage ratio characteristics on PTT yarn with six different count were investigated with tension, dry and wet thermal temperature. In non-tension, the shrinkage ratio were increased to increasing temperature at dry and wet thermal treatment, and in tension, the shrinkage ratio were increased to increasing tension at dry and wet thermal treatment.

• 한방안이비인후피부과학회지
• /
• 제20권2호통권33호
• /
• pp.213-229
• /
• 2007

Objective : This study investigated results of treatment of Atopic Dermatitis(AD) patients diagnosed as damp-heat type with herbal medicine and wet dreesing. Method : Six AD subjects diagnosed as damp-heat type were selected from the outpatient department of East-West Neo Medical Center in the period of Dec. 2006 to Feb. 2007. Each subject was treated with herbal medicine and wet dressing. Severity Scoring of Atopic Dermatitis(SCORAD) was used to evaluate the effect of treatment and pictures were taken of the Atopic dermatitis lesions. Result & Conclusion : We observed improvement on SCORAD score, especially intensity score of damp-heat type when they were treated with herbal medicine and wet dressing. However, it is less effective and AD often recurs in case of chronic adult-type AD. In addition, nipple eczema in some patients has showed a tendency to improve slowly and recur easily compared to other lesions.

• 한국의류산업학회지
• /
• 제5권3호
• /
• pp.273-282
• /
• 2003

Effect of fixation methods and relaxation treatment on the flame retardant(FR) and physical properties of MDPP/HMM treated cotton weft-knitted fabrics were studied. Combination of four different fixation methods - relaxation, swelling agent treatment, pad dry cure fixation, and wet fixation - were applied to flame retardant finish of cotton weft-knitted fabric with MDPP/HMM. As the results, 1. Swelling agent and wet fixation method helps FR agent penetrate the fiber efficiently. Interlock showed relatively higher values of LOI than single jersey. 2. Interlock showed relatively higher values of bending rigidity(B), shear rigidity(G) and coefficient of friction(MIU) than those of single jersey before and after flame resistant treatment. 3. An increase in internal volume of cotton fiber by relaxation treatment increased the bending rigidity(B), shear rigidity(G) and compressional energy(WC). 4. The cotton weft-knitted fabric treated wet fixation, which crossliked FR agent efficiently, showed higher bending rigidity, shear rigidity(G) and lower compressional energy(WC). Retention of swelling ability of cotton weft-knitted fabrics treated with MDPP/HMM, which increased the internal volume of cotton weft-knitted fabric, showed lower bending rigidity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.395-395
• /
• 2013

GaN는 LED, 태양전지, 그리고 전자소자 등에 쓰이는 물질로, 관련 연구가 활발히 진행되고 있으며, 이와 더불어 top-down방식을 활용한 소자제작 방법 또한 발달되고 있다. 하지만, 일반적으로 LED 제작에 사용되는 c-plane GaN의 경우, c축 방향으로 발생하는 분극의 영향을 받게되며, 분극은 LED내 양자우물의 밴드를 기울게 하여 전자와 홀의 재결합률을 감소시켜 낮은 내부양자효율을 야기한다. 이러한 문제를 해결하기 위해 여러 가지 방법들이 제시되었으며, 그 중에서도 a면, 혹은 m면과 같은 nonpolar면을 사용하는 GaN LED가 주목받고 있다. 본 연구에서는, top-down방식을 통해 약 $2{\mu}m$ 크기의 diameter를 갖는 micro-sized column LED를 구현하였으며, 식각 후 드러나는 semipolar면을 wet treatment를 통해 제거하여 nonpolar면을 드러나게 하였으며, 이 면에 Ni/Au를 contact하여, 전기적, 광학적 특성을 논하였다. Fig. 1은 I-V 특성 그래프이며, Fig. 2는 EL측정 결과(광학적 특성)이다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.183-186
• /
• 2008

All measures to cope with flooding rely on flood predictions to some extent, and the effectiveness of these measures is dependent on the quality of flood predictions. It is important to track properly the movements of the river-bankline in numerical modeling because the location of it varies continuously in the flood inundation. In this study, the wet and dry treatment is used to describe the moving river-bankline accurately (Cho, 1996). An oscillatory flow motion in a parabolic basin is used to validate the performance of the developed model based on quadtree grids. As a result of a simulation, a reasonable agreement is observed with analytical and Cho's results.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.111-117
• /
• 2008

We have studied surface roughness, contamination of impurity, bonding with some gas element, reflectance and zeta potential on masks to be generated or changed during photolithography/dry or wet etching process. Mask surface roughness was not changed after photolithography/dry etching process. But surface roughness was changed on some area under MoSi film of Cr/MoSi/Qz. There was not detected any impurity on mask surface after plasma dry etching process. Reflectance of mask was increased after variable plasma etching treatment, especially when mask was treated with plasma including $O_2$ gas. Blank mask was positively charged when the mask was treated with Cr plasma etching gas($Cl_2:250$ sccm/He:20 $sccm/O_2:29$ seem, source power:100 W/bias power:20 W, 300 sec). But this positive charge was changed to negative charge when the mask was treated with $CF_4$ gas for MoSi plasma etching, resulting better wet cleaning. There was appeared with negative charge on MoSi/Qz mask treated with Cr plasma etching process condition, and this mask was measured with more negative after SC-1 wet cleaning process, resulting better wet cleaning. This mask was charged with positive after treatment with $O_2$ plasma again, resulting bad wet cleaning condition.

• 한국의류산업학회지
• /
• 제7권3호
• /
• pp.327-332
• /
• 2005

The purpose of this study is to investigate the effect of chitosan treatment on the dyeing of cotton fabric specimens using loess as colorants. The wet pick up ratio of the chitosan acid solution, as well as the drying condition after the padding of the fabric specimens, was changed in order to study the loess uptake on the fabric. The average particle diameter of the loess was measured. Main components of the loess were $SiO_2$, $Al_2O_3$, and $Fe_2O_3$. By the chitosan treatment, the loess amount on the cotton fabric increased. 80% wet pick up ratio of the chitosan acid solution on the cotton fabric specimen allowed more stable and even adhesion of the loess on the fabric surface, compared to the cases of 100% and 120% wet pick up ratio.

• 한국응용과학기술학회지
• /
• 제33권4호
• /
• pp.734-740
• /
• 2016

The micron-sized indium zinc tin oxide (IZTO) particles were prepared by spray pyrolysis from aqueous precursor solution for indium, zinc, and tin and organic additives such as citric acid (CA) and ethylene glycol (EG) were added to aqueous precursor solution for indium, zinc, and tin. The obtained IZTO particles prepared by spray pyrolysis from the aqueous solution without organic additives had spherical and filled morphologies, whereas the IZTO particles obtained with organic additives had more hollow and porous morphologies. The micron-sized IZTO particles with organic additives were changed fully to nano-sized IZTO particles, whereas the micron-sized IZTO particles without organic additives were not changed fully to nano-sized IZTO particle after post-treatment at $700^{\circ}C$ for 2 hours and wet-ball milling for 24 hours. Surface resistances of micron-sized IZTO's before post-heat treatment and wet-ball milling were much higher than those of nano-sized IZTO's after post-heat treatment and wet-ball milling. From IZTO with composition of 80 wt. % $In_2O_3$, 10 wt. % ZnO, and 10 wt. % $SnO_2$ which showed a smallest surface resistance IZTO after post-heat treatment and wet-ball milling, thin films were deposited on glass substrates by pulsed DC magnetron sputtering, and the electrical and optical properties were investigated.

• 한국축산식품학회지
• /
• 제44권4호
• /
• pp.899-911
• /
• 2024

This research investigated the synergic outcome of high intensity ultrasound (HIU) treatment and wet-dry combined aging (WDCA) on physiochemical characteristics and lipid oxidation during refrigerated storage to ameliorate pork meat's quality and shelf life. The CIE b^* values, cooking loss (CL %), and pH of the HIU treated samples were higher than those of the control over the aging period. They were significantly (p<0.05) modified by the aging period and ultrasound (US) treatment. However, the released water (RW %) and moisture were not significantly influenced by US treatment (p>0.05). The Warner-Bratzler shear force of HIU-treated samples was lower over control values except in 7-14 d, and it showed a significant difference between control and US treatment according to the significance of HIU (p<0.05). The thiobarbituric acid reactive substance of HIU-treated samples was significantly higher (p<0.05) than control values over the aging period. These results suggested that HIU treatment and WDCA showed a synergistic effect of maximizing the tenderness, but lipid oxidation was higher than before ultrasonic treatment. In agreement with this, the most favorable approach would involve implementing wet aging for a period of two weeks followed by dry aging for a period not exceeding one week after the application of HIU.

• 한국광물학회지
• /
• 제27권3호
• /
• pp.115-124
• /
• 2014

금-은 함유 황화광물 정광으로부터 Au와 Ag를 용출시키기 위하여 황화광물 정광을 건식과 습식으로 전처리하였다. 전처리한 황화광물에 대하여 광물학적 연구와 티오요소 용출실험을 수행하였다. 평균입도와 등전위는 정광시료에서 보다 건식 전-처리 시료에서 낮게 나타났고, 건식 전-처리 시료 보다 습식 전-처리 시료에서 더 낮게 나타났다. XRD 분석결과, 습식 전-처리 시료에서만 비정질의 특성이 나타났다. 정광시료에서, 최대의 Au, Ag 용출인자는 1.0 g의 티오요소, 1.0 M의 황산제2철, 2.0 M의 황산 농도에서 그리고 $60^{\circ}C$의 용출온도에서였다. Au, Ag용출률은 건식 전-처리 시료에서 보다 습식 전-처리 시료에서 언제나 많이 그리고 빠르게 나타났다. 따라서, 향후 적당한 미분쇄 첨가제와 시간으로 전처리를 수행하고 비-시안 용매를 적용한다면 친환경적으로 Au, Ag를 용출시킬 수 있을 것으로 기대된다.