• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.300-303
• /
• 2004

In this study, the mixing contents of ceramic powder and of shrinkage-reducing agent (SRA) influencing on the strength properties of MMA-modified polymer paste were examined. Regardless of SRA content, the flexural. the compressive and the adhesive strengths of the MMA-modified polymer paste tended to increase as the mixing content of ceramic powder increased. On the other hand, those strengths of the polymer paste tended to decrease as the mixing content of SRA increased without regard to the paste content. Furthermore. the adhesive strength of MMA-modified polymer paste in a wet condition decreased about $30-40\%$ of that in an air-dry condition without regard to the mixing content of ceramic powder and SRA.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.167-170
• /
• 2002

일반적으로 합섬filament絲를 이용하여 제품을 제조 할 때 많은 부가공정들을 거치게 되며, 이들 각 공정과 공정 사이에는 항상 열과 장력을 받게 된다. 전보$^{ 1).2)}$ 에서 설명 된 것과 같이 이들 열과 장력은 각각의 공정에서뿐만 아니라 후공정에서의 제품의 품질에도 영향을 미친다. 이러한 요인으로 인한 제품의 불량은 상품가치저하뿐만 아니라 cost 상승, 수출 경쟁력 저하등에 까지 영향을 미치므로 일선 산업라인에서는 심각한 사항이 아닐 수 없다. (중략)

• Journal of the Korean Ceramic Society
• /
• v.31 no.11
• /
• pp.1265-1270
• /
• 1994

Ultra-fine hydroxyapatite powder were synthesized by the hydrothermal reaction at 10 atm, 3 hrs of Ca(OH)2 suspension with (NH4)2HPO4 solution, and were characterized sintering behavior. Sintered bodies of hydroxyapatite powders which synthesized by hydrothermal reaction method has less weight loss, less sintering shrinkage and superior mechanical property, and was more dense than sintered bodies of hydroxyapatite powder which synthesized by wet method. Sintered bodies were hydroxyapatite single phase. When soack in Ringer's solution for 2 weeks, hydroxyapatite powders preserved hydroxyapatite and sintered body absorbed trace of Ca2+ ion with soaked time.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.143-146
• /
• 2001

최근 합섬소재가 다양하게 전개가 되면서 소재의 복합화가 이루어지고 있다. 이들 다양한 소재들은 가공된 직물이 만들어지기까지 여러 단계의 공정을 거치면서 공정에서 부가되는 장력과 열을 받게 된다. 이들 공정에서 받는 장력과 열처리는 소재의 물성에 큰 변화를 주게되며 최종 가공된 직물의 품질에 큰 영향을 미친다. (중략)

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.103-107
• /
• 2008

This study was to execute the experiment for analyzing the quality characteristics of mortar by type of recycled sand by using the recycled sand produced by the manufacturing system by wet gravity separation in order to develop the removal device of impurities for the production of high-quality recycled sand. As a result, this study has sown that the mortar using the high-quality recycled sand through the manufacturing system by wet gravity separation in the fluidity property, strength property, and shrinkage property largely, compared with the mortar using low-quality recycled sand that not passed the device of sand flux. There was a tendency similar to the plane mortar. In conclusion, it was considered as various quality performances of the recycled sand were improved through the production stage of prototype.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.2
• /
• pp.353-370
• /
• 2023

In this study, the performance of ultrasonic cleaners for ultrasonic washing, which is one of the wet cleaning methods, was evaluated. The washing performances of ultrasonic cleaners were compared with commercial washing machines under normal and wool courses based on different parameters such as detergency, wrinkle formation, fabric damage, dimensional stability, and germ removal ability. Cotton, silk and wool were used in this experiment. Results revealed that the ultrasonic washing detergency of cotton fabrics was lower than that of commercial washing machines under the normal course and similar to that of commercial washing machines under the wool course. Detergency of silk fabrics was similar under both normal and wool courses. In terms of wrinkle formation and dimensional stability, ultrasonic cleaners showed lesser wrinkles and lower shrinkage than commercial washing machines. Considering damage evaluation, ultrasonic cleaners more effectively removed soil without damaging fabrics compared with commercial washing machines. The bacteria removal rate of both cotton and silk was more effective than the wool course of a commercial washing machine. Thus, this study compares the performance of ultrasonic cleaners and commercial washing machines and provides meaningful results related to ultrasonic washing performance.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.4 s.117
• /
• pp.17-23
• /
• 2006

Paper has fibers and fines network structure and it is strongly affected by interface bond-ing between fibers. Paper structural properties can be determined depending on the inter-fiber bonding. Fines play an important role in Campbell and consolidation effect through wet pressing and drying operations. The fines are essential for the formation of bonds between fibers and for the improvement of strength properties of papers. Since the fines are components of the pulp, there are always two factors to be considered: the quality and quantity of the fines. The quality of fines might be a potential variable to give a more accurate picture of the papermaking potential of the pulp. The object of this study is to investigate the effect of different types of pulp fines on the properties of paper and to access the potential of fines for controlling the bulk of paper. Refined Sw-BKP, Hw-BKP and BCTMP fines were used to investigate the fines effect. Wet-web strength, breaking length, scattering coefficient, and hydrodynamic specific volume, and drying shrinkage were measured. According to the results, chemical and morphological compositions of fines do not strongly affect to wet-web forming by their similar Campbell effect, but strongly affect to drying operation which forms hydrogen bonding among fiber-fines-fiber matrixes. Paper bulk should be controlled by the extent of hydrogen bonding between fibers during drying operation.

• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.227-232
• /
• 2006

This article presents the results of experimental study that investigates the effect of filler and shrinkage reducing agent influencing on the strength properties of MMA-modified polymer paste that was produced to develop the surface-repair and coating materials of the concrete structures. Results show that the flexural and compressive strengths of the polymer paste increased 29 and 27%, respectively, when the aluminum hydroxide completely replaced the calcium carbonate as the filler Furthermore, when the shrinkage reducing agent was used 30%, both strengths decreased about 29% comparing to when the agent was not used. As in the cases of flexural and compressive strengths, the adhesive strength increased as the content of aluminum hydroxide as the filler increased, and it decreased as the content of shrinkage reducing agent increased. The adhesive strength with a dry concrete substrate turned out to be $30{\sim}40%$ higher than that with a wet concrete substrate.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.5
• /
• pp.1-17
• /
• 2002

The immobilization and consolidation of the model coatings based on the plastic pigment and latex binder of known particle sizes were theoretically Studied in terms of the dense random packing of binary spheres and varying extent of latex film shrinkage. The porosity of the model coatings was calculated based on three proposed latex shrinkage models: Maximum, Minimum, and Linearly Decreasing Latex Shrinkage. The increasing extent of latex shrinkage was calculated up to the critical pigment volume concentration(CPVC) as a function of plastic pigment volume fractions, and the maximum latex shrinkage was estimated from the CPVC. Also, the number of pores and the average equivalent spherical pore diameters were calculated based on those proposed models. The opacity and gloss of the model coatings on polyester films were measured and their porosity was also determined by a simple coat weight-thickness method. As expected, various coating structure-property-composition relationships, such as opacity, gloss, porosity, etc., were shown to exhibit sharp transitions near the CPVC. The CPVC values determined by the opacity, gloss, and porosity vs. PVC relationships, respectively, agreed very well with each other. Especially, the CPVC's determined by the opacity and porosity vs. PVC curves were identical. The comparison between the theoretically calculated and experimental porosity values showed that the intermediate value between the maximum and minimum latex shrinkage would best fit the experimental porosity data. The effect of plastic pigment particle size on the optical properties and porosity of model coatings was also studied and it was observed that the coating opacity and porosity increased with increasing plastic pigment particle size, but the gloss decreased. The ink gloss of the uncalendered model coatings applied onto commercial sheet offset coated papers was shown to be affected by both the coating gloss and porosity: the higher the coating gloss, the higher the ink gloss, but the higher the coating porosity, the lower the ink gloss. Their printability was also studied in terms of the number of passes-to-fail and the rate of ink setting as a function of both plastic pigment volume fractions and plastic pigment particle sizes. A minimum crack-free temperature(MCR) of latex-bound coatings was proposed to better predict the behaviors of latexes as coating binders. The wet state of model coating dispersions, the surfaces of consolidated model coatings, and their internal structure were examined by both electron and atomic force microscopy, and their micrographs were found to be consistent with our immobilization and consolidation models.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.6 no.1
• /
• pp.14-22
• /
• 1970

To investigate some properties of imported netting twines, the breaking strength, elongation and shrinkage were measured. Most of the yarns of palyamide (nylan 6), as raw material, used for netting twines are imported from Japan, however, their properties by maker's are not well known in Korea. The properties of these imported twines were ompared with Korean made netting twines and the effects of dying were also tested according to temperature. After all, nylon 6 of Unitika was the strongest and followed by those of Toray, Teijin, Kalan respectialy in wet and dry condition. The shrinkage was 3.07-5.0 % after dying in imported netting twines, while Kalan was 8. 84 % .