• 모자간호학회지
• /
• v.4 no.1
• /
• pp.3-11
• /
• 1994

Presently there is an increasing demand for home health care services due to changes in the demographic structure as a result of an increasing elderly population, socio-economic improvements, and changes in the family structure, as well as the growing number of people with degenerative diseases. In addition to these reasons, rising medical costs and there a shortage of patient beds space in the hospital, particularly since introduction of national medical insurance. There has been an increasing demand for health care health care services. This study was done to identify the basic data for home health care management. It focused on developing client selection criteria, assessment tools, and recording methods. This was accomplished by the researchers visiting the patients in their homes. The research process included preparation investigation, tool development, training of the project researcher, and visiting the clients in their homes. The research tools are as follows : 1. Record development : a) The selection criteria tool for home health care of postpartum women was a structured tool and consisted of four parts. b) The structured assessment tool consisted of a general items, obstetric history, past medical history, methods of feeding, medications taken before admission, laboratory test results, discharge instructions, discharge medications, family tree, economic status, environmental status, a map, health assessment of postpartum women and their newborns. c) The visit note I consisted of the frequency of visits. Visit note II consisted of the date ; nursing problems ; nursing process including the initial assessment ; nursing goal ; visit plan ; postpartum women and their neonate health status, diagnosis, goal, implementation, evaluation, summary, next plan, for visit revision. d) Problem note consisted of the date, problem numbers, nursing diagnosis, problem appearance date problem resolution date. The research results are as follows : 1. Nursing problems : The nursing problems of the postpartum women and their neonates were evaluated by the number of nursing diagnoses and the change in the pattern of nursing diagnosis related to the number of visits. a) Nursing diagnosis The nursing diagnosis was classified according to physical function, psychosocial function, family system maintained function. b) The changes of nursing diagnosis related to the number of visits. As the type of nursing diagnosis changed related to the number of visits the number of nursing diagnoses decreased. 2. Contents of home health care : The content was categorized according to assessment, direct care, counseling, education, family care, reporting to with the attending doctor. The recommendations based on the research results are as follows : 1. Tool development Replication of this study is needed to test the validity of the assessment tools used. 2. Home visit a) Home health care nurses should be licensed and qualified. A referral form from the attending doctor is needed for legal protection of nurses. b) The first home visit need to be within 24 hours of discharge from the hospital to decrease the anxiety of frightened postpartum women. c) When the changes occur in the newborn's status, home health care nurses should consult a pediatrician. Communication within the home healthcare team is essential and needs to consistent and done smoothly. 3. Home health care A Study is required to develop protocols for education of staff and for operation of all aspects of this program.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.4
• /
• pp.88-95
• /
• 2013

A new droop control method which can be applied to 3-phase 4-wire uninterruptible power supply is proposed in this paper. The droop control method for parallel operation is very attractive one as UPS parallel operation can be carried out without any data communication devices provided among UPS systems connected, but it reportedly shows a PnP(plug-and-play) problem. A basic reason why a circulating current could flow among parallel-connected UPS systems is clearly investigated as well when droop-controlled-ups systems are operated in the manner of PnP. The proposed algorithm is deduced from the investigated result and is basically structured to keep a balanced frequency and balanced voltage profile against power variation. This paper shows that balanced parallel operation of droop control method can be obtained under unbalanced load as well as balanced load conditions when PnP operation is needed and load change occurs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.10
• /
• pp.669-676
• /
• 2022

In this paper, the carriage load analyses of stores installed on aircraft are conducted to validate the chimera grid method applied to an unstructured CFD solver, UMSAPv. First, the chimera grid method of UMSAPv is verified for the well-known Eglin Wing/Pylon/Finned store problem. Next, an angle of attack sweep of F/A-18C clean configuration is conducted at a subsonic speed. The computed results are compared with the results of the previous study using MSAPv, a structured CFD solver, to show the validity of Umsapv. Finally, the carriage of F/A-18C JDAM is carried out with a chimera grid as well as a single block grid. The computed results are compared with other computational, experimental and the flight tests.

• Journal of Families and Better Life
• /
• v.23 no.2 s.74
• /
• pp.11-22
• /
• 2005

The purpose of this study is 1) to clarify that the house is no long the safe place through the cases of the senior safety accidents and to argue the need for housing repair and 2) to present the minimum standards for housing repair by comparing the cases here as well as the abroad and to back up the standards with the current senior housing environment 300 people at least 60 years old living in Seoul$\cdot$Metropolitan area were interviewed using the structured questionnaire. As the result, the following conclusions were made: 1. There was high accident rates of the senior residents due to physical deficits within the house, causing excessive medical cost and decreased housing satisfaction. This problem can be sufficiently prevented by housing repair which can not only solve the safety problem but also support self sufficient living for the senior residents. 2. Proper housing repair required the architectural know how as well as the expertise knowledge of the physical characteristics of the senior people. Therefore, it is essential to secure the professional (i.e., occupational therapist) who can analyze the needs of the senior residents and evaluate and/or predict the obstacles during repair. Furthermore, development and distribution of the standardized manual are also needed. 3. The minimum standard for housing repair could be approached in view of 'barrier-free' concept. First, the bumps should be removed, slippery prevented, and safety grab-bar installed for safety. Second, the entrance should be widened and the bathroom and kitchen restructured to support for the senior residents' self sufficiency. To make housing repair policy more efficient, the legal basis is required. It can be incorporated into the existing senior citizens 'Welfare Act' or the 'Senior Residents Medical Insurance' which will be effective starting in 2007.

• Korean Journal of Cognitive Science
• /
• v.10 no.4
• /
• pp.71-83
• /
• 1999

Conventional symbolic inference systems lack flexibility because they do not well reflect flexible semantic structure of knowledge and use symbolic logic for their basic inference mechanism. For solving this problem. we have recently proposed the 'Connectionist Semantic Network(CSN)' as a model for flexible knowledge representation and inference based on neural networks. The CSN is capable of carrying out both approximate reasoning and commonsense reasoning based on similarity and association. However. we have difficulties in representing general and structured high-level knowledge and variable binding using the connectionist framework of the CSN. In this paper. we propose a hybrid system called SymCSN(Symbolic CSN) that combines a symbolic module for representing general and structured high-level knowledge and a connectionist module for representing and learning low-level semantic structure Simulation results show that the SymCSN is a plausible model for human-like flexible knowledge representation and inference.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.8-14
• /
• 2000

This paper analyzes and accesses the gain of optically pumped surface-normal MQW optical amplifiers. The proposed amplifiers have the advantage of polarization independence, high coupling efficiency to and from optical fibers, and flexibility of operating wavelength. We analyzed the gain characteristics of 100 - 200-period MQWs and verified the dependence of a strained lattice and selective doping. Theoretical analysis of such MQWs showsa single-pass gain of 3 dB with broad operation bandwidth. A single-pass gain of 2.6 dB is obtained experimentally in an InGaAs/InGaAlAs MQW amplifier, which is compared with calculations. The use of Fabry-Perot interferometer (FPI) structure in an optical amplifier is a useful way to increase the gain, but causes a problem of narrow operation bandwidth when the single-pass gain is low. Therefore, a single-pass gain above 2to 3 dB is a prerequisite to achieve both a high gain and moderate operation bandwidth in FPI-structured opticalamplifiers. We have designed an FPI-structured surface-normal optical amplifier both with a high gain of broad operation bandwidth of 4.6mm, when a single-pass gain is 3 dB.

• Korean Management Science Review
• /
• v.11 no.2
• /
• pp.1-27
• /
• 1994

A reliability data processing MPRDP (Multi-Purpose Reliability Data Processor) has been developed in FORTRAN language since Jan. 1992 at KAERI (Korean Atomic Energy Research Institute). The purpose of the research is to construct a reliability database(plant-specific as well as generic) by processing various kinds of reliability data in most objective and systematic fashion. To account for generic estimates in various compendia as well as generic plants' operating experience, we developed a 'three-stage' Bayesian procedure[1] by logically combining the 'two-stage' procedure[2] and the idea for processing generic estimates[3]. The first stage manipulates generic plant data to determine a set of estimates for generic parameters,e.g. the mean and the error factor, which accordingly defines a generic failure rate distribution. Then the second stage combines these estimates with the other ones proposed by various generic compendia (we call these generic book type data). This stage adopts another Bayesian procedure to determine the final generic failure rate distribution which is to be used as a priori distribution in the third stage. Then the third stage updates the generic distribution by plant-specific data resulting in a posterior failure rate distribution. Both running failure and demand failure data can be handled in this code. In accordance with the growing needs for a consistent and well-structured reliability database, we constructed a generic reliability database by the MPRDP code[4]. About 30 generic data sources were reviewed and available data were collected and screened from them. We processed reliability data for about 100 safety related components frequently modeled in PSA. The underlying distribution for the failure rate was assumed to be lognormal or gamma, according to the PSA convention. The dependencies among the generic sources were not considered at this time. This problem will be approached in further study.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.237-244
• /
• 2002

Analyzing acoustic-structural systems such as automobiles and aircraft, the FRF-based substructuring (FBS) method is one of the most powerful tools. In this paper, a general procedure for the parametric sensitivity analysis of vibro-acoustic problems has been presented using the multi-domain FRF-based substructuring formulation. For an acoustic-structural system sub-structured by multiple domains, the substructuring formulation gives the reaction farces on the interface boundaries. The design sensitivity formula is obtained from the direct differentiation of the reaction force expression with respect to the design vector. As a practical application, the proposed design sensitivity formula is applied to an engine mount system of passenger car. An objective of the problem is to identify the most effective engine mounts and bushes in minimizing the interior noise over the concerned rpm range. The comparison of the sensitivity results with those of the finite difference method shows excellent agreement. In addition, stiffness modifications of the mounts and bushes identified through the design sensitivity analysis lead to a successful decrease of the interior noise. This results show usefulness of the present method very well.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.211-218
• /
• 2001

This paper introduces a method of constructing expert systems in an integrated environment for automatic software design. This integrated environment may be applicable from top-level system architecture design, data flow diagram design down to flow chart and coding. The system is integrated with three CASE tools, FSD (Functional Structure Diagram), DFD (Data Flow Diagram) and structured chart PAD (Problem Analysis Diagram), and respective expert systems with automatic design capability by reusing past design. The construction way of these expert systems is based on systematic acquisition of design knowledge stemmed from a systematic design work process of well-matured developers. The design knowledge is automatically acquired from respective documents and stored in the respective knowledge bases. By reusing it, a similar software system may be designed automatically. In order to develop these expert systems in a short period, these design knowledge is expressed by the unified frame structure, functions of th expert system units are partitioned mono-functions and then standardized components. As a result, the design cost of an expert system can be reduced to standard work procedures. Another feature of this paper is to introduce the integrated environment for automatic software design. This system features an essentially zero start-up cost for automatic design resulting in substantial saving of design man-hours in the resulting in substantial saving of design man-hours in the design life cycle, and the expected increase in software productivity after enough design experiences are accumulated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.2121-2142
• /
• 2011

In this paper, we propose an e-Learning process control model that aims to graphically describe and automatically generate the manifest of sequencing prerequisites in packaging SCORM's content aggregation models. In specifying the e-Learning activity sequencing, SCORM provides the concept of sequencing prerequisites to be manifested on each e-Learning activity of the corresponding tree-structured content organization model. However, the course developer is required to completely understand the SCORM's complicated sequencing prerequisites and other extensions. So, it is necessary to achieve an efficient way of packaging for the e-Learning content organization models. The e-Learning process control model proposed in this paper ought to be an impeccable solution for this problem. Consequently, this paper aims to realize a new concept of process-driven e-Learning content aggregating approach supporting the e-Learning process control model and to implement its e-Learning process modeling system graphically describing and automatically generating the SCORM's sequencing prerequisites. Eventually, the proposed model becomes a theoretical basis for implementing a SCORM-based e-Learning process management system satisfying the SCORM's sequencing prerequisite specifications. We strongly believe that the e-Learning process control model and its modeling system achieve convenient packaging in SCORM's content organization models and in implementing an e-Learning management system as well.