• Journal of Microbiology and Biotechnology
• /
• v.17 no.3
• /
• pp.520-523
• /
• 2007

Edible films of gelatin and com zein were prepared by incorporating nisin to the film-forming solutions. Com zein film with nisin of 12,000 IU/ml had an increase of 11.6 MPa in tensile strength compared with the control, whereas gelatin film had a slight increase with the increase of nisin concentration added. Water vapor permeability for both com zein and gelatin films decreased with the increase of nisin concentration, thus providing a better barrier against water. Antimicrobial activity against Listeria monocytogenes increased with the increase of nisin concentration, resulting in 1.4 log cycle reduction for com zein film and 0.6 log cycle reduction for gelatin film at 12,000 IU/ml. These results suggest that incorporation of nisin into com zein and gelatin films improve the physical properties of the films as well as antimicrobial activity against pathogenic bacteria during storage, resulting in extension of the shelf life of food products by providing with antimicrobial edible packaging films.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.4
• /
• pp.477-483
• /
• 2015

The k-Winners-Take-All (kWTA) is an operation to find the largest k (>1) inputs among N inputs. Parallel search algorithm of kWTA for digital inputs is not invented yet, so most of digital kWTA architectures have O(N) time complexity. A parallel search algorithm for digital kWTA operation and the circuits for its VLSI implementation are presented in this paper. The proposed kWTA architecture can compare all inputs simultaneously in parallel. The time complexity of the new architecture is O(logN), so that it is scalable to a large number of digital data. The high-speed kWTA operation and its O(logN) dependency of the new architecture are verified by simulations. It takes 290 ns in searching for 5 winners among 1024 of 32 bit data, which is more than thousands of times faster than existing digital kWTA circuits, as well as existing analog kWTA circuits.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.39-46
• /
• 1993

In this paper, an offset paraboloidal reflector antenna satisfied efficiency of over 60% and sidelobe envelope line of 29-25$log\theta$ was designed and manufactured for Ku-band VSAT(Very Small Aperture Terminal) antenna. The radiation patterns of experimental antenna were computed by applying the series expansion method using the Zernike polynomials. The measured patterns are in good agreement with the computed results. The Gain, efficiency, and sidelobe envelop line fairly well satisfy the design specifications except first sidelobe level.

• Structural Engineering and Mechanics
• /
• v.60 no.1
• /
• pp.71-90
• /
• 2016

In this paper, the normalized variable V=(log N-B)(log ${\Delta}{\sigma}-C$-C), as derived from the probabilistic S-N field of Castillo and Canteli, is taken as a reference for calculation of damage accumulation and probability of failure using the Miner number in scenarios of variable amplitude loading. Alternative damage measures, such as the classical Miner and logarithmic Miner, are also considered for comparison between theoretical lifetime prediction and experimental data. The suitability of this approach is confirmed for it provides safe lifetime prediction when applied to fatigue data obtained for riveted joints made of a puddle iron original from the Fao bridge, as well as for data from experimental programs published elsewhere carried out for different materials (aluminium and concrete specimens) under distinct variable loading histories.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2353-2360
• /
• 2000

Statistical fatigue properties of metallic materials are increasingly required for reliability design purpose. In this study, static and fatigue tests were conducted and the normal, log-normal, two -parameter Weibull distributions at the 5% significance level are compared using the Kolmogorov-Smirnov goodness-of-fit test. Parameter estimation were compared with experimental results using the maximum likelihood method and least square method. It is found that two-parameter Weibull distribution and maximum likelihood method provide a good fit for static and fatigue life data. Therefore, it is applicable to the static and fatigue life analysis of the spheroidal graphite cast iron. The P-S-N curves were evaluated using log-normal distribution, which showed fatigue life behavior very well.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.4 no.2
• /
• pp.47-53
• /
• 1980

Kikukawa-Compliance method using a conventional clip-on gauge was employed to investigate fatigue crack growth and crack closure in 2017-T3 aluminum alloy. The crack growth rate plot against stress intensity range .DELTA.K on a log-log diagram exhibits a bilinear form with a transition at the growth rate of 10$\^$-4/ mm/cycle. The bilinear form appears still in the plot of growth rate versus effective stress intensity range .DELTA.K$\_$eff/. Fatigue crack growth rate could be well represented by .DELTA.K$\_$eff. The experimental results indicate that the effective stress intensity range ratio U depends on the maximum stress intensity factor K$\_$max/, but the stress ratio R does not affect U. The crack opening stress intensity factor K$\_$op/ tends to increase with increasing K$\_$max/ and decrease with increasing .DELTA.K.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1996.11a
• /
• pp.50-53
• /
• 1996

This paper reports the experimental results for the determination of the overall partition coefficient of VOCs in unsaturated soil, A chromatographic method was used for the determination of gaseous partition coefficients to natural soil under various water content conditions. The equilibrium vapor pressure of water over saturated salt solution was used to fix the relative humidity of the air and control the water content of the soil systems. The transport behavior was studied for dichloromethane, trichloroethane and dichlorobenzene pollutants, with log octanol-water partition coefficients(log $K_{ow}$ ) which range from 1.25 to 3.39, or water to soil partitioning which varies by 135 times; water solubility constants which vary by 3 times; and vapor pressures which range from 1 to 362 torr. Water content of the soil had a pronounced effect on the effective partition coefficient(between gas and soil + water stationary phase) as well as on the effective dispersion coefficient.

• Food Science and Preservation
• /
• v.1 no.2
• /
• pp.87-92
• /
• 1994

For the measurement of the change of respiration rate caused by the gas content of storage atmosphere which furnishes important data for the interpretation of ULO storage, GC was used. It has been shown that the respiration rate and respiratory heat generation rate of Fuji apple is more than doubled in normal low temperature storage when compared with ULO storage, and that in ULO storage the respiration rate and respiratory heat generation rate directly proportional to the concentration of O2 in storage atmosphere as well as inversely proportional to that of CO2. It was possible to establish a functional formula for the respiratory heat generation rate of Fuji apple in all the storage conditions in terms of u=-0.7638+0.0003 O2-0.0007 log(CO2)+0.1369 log(Tb) concerning temperature and the concentration of O2 and CO2

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.29-34
• /
• 1999

In the paper, the extened Huygens-Fresnel principle has been used to make an analysis of the statistics the received intensity for speckle propagation though the turbulent atmosphere. The results of these formulations include of the log-amplitude covariance as well as the wave structure functions, and It was found that the normalized variance is dependent on the turblence strength and rises above unity.

• Communications for Statistical Applications and Methods
• /
• v.22 no.4
• /
• pp.389-399
• /
• 2015

It is important not to overcalculate sample sizes for clinical trials due to economic, ethical, and scientific reasons. Kang and Kim (2014) investigated the accuracy of a well-known sample size calculation formula based on the approximate power for continuous endpoints in equivalence trials, which has been widely used for Development of Biosimilar Products. They concluded that this formula is overly conservative and that sample size should be calculated based on an exact power. This paper extends these results to binary endpoints for three popular metrics: the risk difference, the log of the relative risk, and the log of the odds ratio. We conclude that the sample size formulae based on the approximate power for binary endpoints in equivalence trials are overly conservative. In many cases, sample sizes to achieve 80% power based on approximate powers have 90% exact power. We propose that sample size should be computed numerically based on the exact power.