• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.157-161
• /
• 2013

It is well known that the targeted fuel efficiency could only be achieved by more than 40% reduction of the vehicle weight through improved design and extensive utilization of lightweight materials. In order to obtain the goal of the weight reduction of automobiles, the researches about lighter and stronger spring link have been studied without sacrificing the safety of automotive components. In this study, the weight reduction design process of spring link could be proposed based on the variation of von-Mises stress contour by substituting an aluminum alloys (A356) having tensile strength of 245 MPa grade instead of SAPH440 steels. In addition, the effect of the stress and stiffness on shape variations of the spring link were examined and compared carefully. It could be reached that this approach could be well established and be contributed for light-weight design guide and the safe design conditions of the automotive spring link development.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.6
• /
• pp.681-685
• /
• 1992

Low molecular weight RNA(LMW RNA : 5S rRNA and tRNAs, <150 nucleotides) profiles of several bacteriocin production lactic acid bacteria from pig meats and reference lactic acid bacteria were generated on 10% denaturing polyacrylamide gel electrophoresis. Data evaluation including three molecular weight markers enabled the calculation of relative nucleotide units(RNU) for every band. Gels profiles and RNU evaluations were effective for identification of lactic acid bacteria species. LMW RNA profiles of lactic acid bacteria showed no variation in dependence on APT(All Purpose Tryptone Broth), TSB(Tryptic Soy Broth), MRS(Lactobacilli MRS Broth) different cultural medium.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.7 no.2
• /
• pp.117-125
• /
• 2003

To know the impact of female pupal weight corresponding to the male cocoon shell weight upon fecundity, hatchability and percentage of non-viable eggs, the experimental multivoltine breeds namely BL67 and 96A were categorised into low, medium and high batches according to the weight of female pupae and male cocoon shells and moths emerged from low, medium and high female pupae were allowed to mate withmoths emerged from low, medium and high male cocoon shells. Both the experimental breeds of BL67 and 96A revealed a fairl trend in fecundity for high batch ＞ medium batch ＞ low batch. When data were statistically analysed, a significant (p ＜ 0.05) and a highly significant (p ＜ 0.01) increase in fecundity was observed in the medium and high batches of BL67 during November - December, 2002 whereas highly significant (p ＜ 0.01) increase was observed in the high batches of 96A during November - December, 2002. Data revealed a highly significant (p ＜ 0.01) increase in fecundity in medium and high batches of both the breeds during January - February, 2003. More interestingly, a significant (p ＜ 0.05) reduction was noted in percentage of non-viable eggs in high batches of 96A during January - February, 2003. But no significant variation in hatchability was noticed due to the effect of differential female pupal weight and male cocoon shell weight.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1543-1551
• /
• 2010

A major aim of cattle genome research is to identify candidate genes associated with meat quantity and quality through QTL analysis for application in the livestock industry. Therefore, this study focused on discovery of useful SNPs within the LOC534614 gene, containing 12273_165 SNP which is located on the same site as the QTL on chromosome 6, and evaluation of the association between SNP and body weight and cold carcass weight in Hanwoo (Korean cattle) As a result of a BLAST search of the NCBI web site, we discovered that the mRNA sequence of the LOC534614 gene was similar to that of the coiled-coil domain containing 158 (CCDC158) for dog and human. According to the direct DNA sequence from the CCDC158 gene, we identified 19 polymorphic SNPs within exons and their flanking regions. Among them, 17 polymorphic SNPs were selected for genotyping in Hanwoo (n = 476) and seventeen marker haplotypes containing 12273_165 SNP (frequency >0.1) were identified. As a result of the association between 17 polymorphic SNPs and Hanwoo (n = 476), g.8778G>A SNP in exon 6 was found to be a non-synonymous SNP, and was significantly associated with body weight and cold carcass weight (p<0.05). We discovered 19 polymorphic SNPs in the CCDC158 gene on the QTL region of BTA 6 in Hanwoo and identified that the g.8778G>A SNP was significantly associated with body weight and cold carcass weight (p<0.05), which causes an amino acid variation from valine to methionine. Furthermore, statistical analysis demonstrated that the CCDC158 gene is strongly associated with body weight and cold carcass weight in Hanwoo. In this regard, the g.8778G>A SNP in the CCDC158 gene can be useful as a positional candidate for body weight and cold carcass weight for marker-assisted selection in Hanwoo.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.4
• /
• pp.429-438
• /
• 2007

Early growth vigor(EGV) is one of the physiological characteristics that may contribute to the increase of genetic yield potential and radiation use efficiency by closing the canopy earlier. To estimate the genotypic variation of EGV, determine the relationships among the related traits, and identify the rapidly growing genotypes and indirect indicator for selection in breeding program, the evaluation of EGV and EGV-related traits was conducted for a total of 140 rice varieties consisting of 101 Korean, 25 Northern China and 14 IRRI-bred rice varieties in a serial sowing experiment in plastic rain shelter and plastic-covered nursery bed in 2003. EGV defined as the amount of leaf area and/or dry weight produced early in the season and the EGV-related traits such as length and breadth of the $2^{nd}\;and\;3^{rd}$ leaves showed highly significant positive correlation with the embryo and seed weight. Especially, the genotypic variation in the length of the third leaf was explained over 90% of genotypic variation in the seed weight. Owing to a large effect of seed size on EGV and its related traits, vigor measurements were adjusted based on their linear or exponential relationships with seed weight for excluding the seed weight effect. EGV and its related-traits adjusted for seed weight also showed big variation among genotypes. Increased EGV was genetically correlated with increases in breadth and length of early leaves. The broad-sense heritability for EGV was significantly high(81%), but lower than those of leaf breadth(90% for the $2^{nd}$ leaf and 93% for the $3^{rd}$ leaf) and length(87% for the $2^{nd}$ leaf and 89% for the $3^{rd}$ leaf). Significantly positive genetic correlations were found between EGV and the breadth and length of early leaves. The high heritability of early leaf breadth and length coupled with their strong genetic correlation with EGV indicated that the breadth and length of the $2^{nd}\;and\;3^{rd}$ leaf would be used as good indirect indicators for EGV selection in rice breeding program.

• Journal of Bio-Environment Control
• /
• v.30 no.1
• /
• pp.27-36
• /
• 2021

A capacitive water sensor was developed to measure the capacitance over a wide part of a substrate using an insulated electrode plate (30 cm × 10 cm) with copper and Teflon attached on either side of the substrate. This study aimed to convert the capacitance output obtained from the condenser-type capacitance sensor into the substrate water content. The quantification experiment was performed by measuring the changes in substrate water weight and capacitance while providing a nutrient solution and by subsequently comparing these values. The substrate water weight and capacitance were measured every 20 to 30 seconds using the sensor and load cell with a software developed specifically for this study. Using a curve-fitting program, the substrate water content was estimated from the output of the capacitance using the water weight and capacitance of the substrate as variables. When the amount of water supplied was increased, the capacitance tended to increase. Coefficient of variation (CV) in capacitance according to the water weight in substrate was greater with the 1.0 kg of water weight, compared with other weights. Thus, the fitting was performed with higher than 1.0 kg, from 1.7 to 6.0 kg of water weight. The correlation coefficient between the capacitance and water weight in substrate was 0.9696. The calibration equation estimated water content from the capacitance, and it was compared with the substrate water weight measured by the load cell.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.97-105
• /
• 1996

For the minimum weight design of ship structures it is desirable that tank arrangement is predetermined to obtain the minimum weight and then structural arrangement and scanting of each murder is determined to obtain the minimum weight within the given tank arrangement. To carry out the tank arrangement to give minimum weight a minimum weight design program which covers whole ship structures is developed by the combination of minimum weight design program of longitudinal members by classification rules and minimum weight design program of transverse members by generalized slope deflection method which were developed by the authors. The hullweight is estimated by summation of the weight of cargo hold part and the weight except cargo hold part which can be estimated by the empirical formula. In this study, the variation of hullweight is shown with the number of tank, the number of web and the location of longitudinal bulkhead. For the application of actual design alternative designs of tank arrangement which satisfy MARPOL regulation are determined. And several minimum weight designs of whole ship structures are carried out to obtain the tank arrangement which gives minimum weight and then the hullweight is compared with that of existing ship.

• Fisheries and Aquatic Sciences
• /
• v.11 no.2
• /
• pp.98-102
• /
• 2008

Relationships between total length (TL) and fecundity, body weight and fecundity, ovary length and fecundity, and ovary weight and fecundity of hilsa shad, Tenualosa ilisha Hamilton, collected from Kuakata, Patuakhali, Bangladesh, were studied. During the sampling period, the fecundity of hilsa was found to range from 169,000 (fish TL=28.0cm, weight=250g) to 1,088,000 (fish TL=40.5cm, weight=955g) with a mean of $520{\pm}53{\times}1,000$. The number of eggs per gram of ovary for samples collected from the anterior, middle, and posterior regions of the ovary were also recorded, but no significant variation was found among ovary regions at the 5% level of significance. Fecundity increased with fish TL and weight. The regression equations obtained in arithmetic forms of relationships between TL and fecundity (F), body weight (BW) and fecundity, ovary length (OL) and fecundity, and ovary weight (OW) and fecundity were $F=-887,896+40,511{\times}TL(r=0.85)$, $F=67,577+755.44{\times}BW(r=0.85)$, $F=-562,070+87,668{\times}OL(r=0.75)$ and $F=124,815+6,596.7{\times}OW (r=0.84)$, respectively. The relationships between fecundity and TL, body weight, ovary length, and ovary weight were linear, and the 'r' values were highly significant (p<0.01). These results provide valuable data for the restoration of hilsa resources, which are economically important but have shown reduced productivity in nations adjacent to the Bay of Bengal.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1639-1641
• /
• 1999

This paper deals with the seasonal variation of soil resistivity and the special characteristic for ground rods by lapse of time. The ground resistance was changed by humidity, temperature of earth and earth resistance. In this experiment, we studied the resistivity during the period from June 1995 to May 1996 by the soil and the corrosion of the ground rods. As a result, the soil resistivity during the period are appeared minimum in summer and maximum in winter. The loss in weight of Fe rod appeared higher than Cu, Al, Cu-Zn, and St. In the lapse of time, Fe rod was reduced 1.2 % later two years and 1.95 % later three years in weight. Cu rod was defected oxygens of 14.7 % later two years and 30.3 % later three years by EDX.

• Journal of Marine Bioscience and Biotechnology
• /
• v.11 no.2
• /
• pp.62-70
• /
• 2019

We investigated the variation of morphological features, density, biomass and characteristics of reproductive shoot on Zostera marina. This species was monthly monitored and collected during a year in Tongyeong (from January 2016 to December 2016). Morphological features, biomass and density showed significantly seasonal variation (p<0.001). Dimensions of Z. marina were highest in spring and early summer but lowest in winter. Biomass and leaf density of Z. marina showed highest value in May (4,700.5 g w·wt m^-2) and June (858.0 leaves m^-2) respectively and lowest value in November (515.9 g w·wt m^-2 and 312.0 leaves m^-2). Reproductive shoot was monitored from April (13℃) to June (21℃) and grew up to ca. 200 cm. Spathe length, spadix weight, numbers and weight of fruit showed significantly different on monthly. None mature flowers were monitored in April but matured flowers, fruits were founded in May and seed releasing were occurred in June.