• The Journal of the Convergence on Culture Technology
• /
• v.5 no.1
• /
• pp.347-352
• /
• 2019

We analyzed the correlation among fruit bearing branch (FBB) and shoot and fruit characteristics in order to select the length of FBB suitable for producing high-quality fruits of 'Soomee', a peach tree developed in Korea. The length and diameter of FBB were 26.1 cm and 6.1 mm, respectively, shoot and leaf number per FBB were 3.2 and 38.6, respectively. Of these, the coefficient of variation was very high in the shoots and leaf number. The average weight and soluble solid content (SSC) of fruit were 298.6 g and 12.2 Brix, respectively, and coefficient of variation of the fruit weight was 18.0 %, which was higher than that of SSC. As the FBB of 10-20 cm and 20-30 cm length per tree were 27.1 % and 25.4 %, respectively, the sum of short and middle FBB frequency per tree was more than 50 %. Fruits of 250-350 g and 11.0-13.0 Brix per tree were distributed in 68.6 % and 74.0 %, respectively. As a result of correlation analysis, fruit weight and shoot number were affected by the length of FBB. In particular, length of FBB showed the relation of fruit weight with $y=-0.0482x^2+2.4512x+277.36$. As a result, the length of FBB that can maximize fruit weight was analyzed as 25.4 cm. Therefore, in the filed, the suitable FBB for producing 'Soomee' peach is estimated to be about 20-30 cm.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.4
• /
• pp.92-104
• /
• 2002

This study investigates, analyzes, and summarizes Dansplantation techniques and methods through practical methodology centering on fieldwork in order to present effective planting methods for large trees that have important significance. The conclusions are as follows : 1. The transplantation process of a large tree generally consists of the stages of digging up a tree, manufacturing a carrier frame, loading the tee on a vehicle, transporting, transplanting the tree, installing a strut and maintaining and managing the new transplant. In addition, planting a tree on a mounted place includes the primary procedures of trimming out the root, and preparing for transplanting the tree on a mounted place, as well as the secondary work of trimming out the root, transplanting a tree on a mounted place, maintenance and management. 2. In order to decide on a transplantation method for a large-sized tree, a structure calculation has to be performed first. That is, one must calculate the weight of the tree and the allowable stress of the strut (H-beam, etc.) fhst and then decide on the upper method through computer modeling based upon this structural calculation. 3. As a result of the analysis of a transplanted tree using the life soil method, it was confirmed that large quantities of feeder roots had developed around the root within a short time after the transplantation. The life soil method has proven to be very effective for transplantation of large-sized trees. 4. As for the production method of an H-beam strut frame, it was found that the manufacturing process and disassembly process were simple and proper; therefore, the H-beam frame is an appropriate structure to be used in the transplantation of large trees. 5. The concavo-convex method, which consists of filling the life soil in the concavo-convex area around the root, was found to be a method that promotes the growth of feeder roots within a short period of time and saves the supply of water at the same time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.264-265
• /
• 2009

In this study, each specimen blended at weight proportions of 80% HDPE to 20% EVA, 70% HDPE to 30% EVA, 60% HDPE to 40% EVA, and 50% HDPE to 50% EVA was manufactured respectively. FE-SEM analysis were carried out as auxiliary analysis means. The insulation performances of the proposed insulator were compared with conventional XLPE, main insulating material of CV cable on the basis of the investigation results of AC insulation performances.

• Korean Journal of Plant Resources
• /
• v.19 no.3
• /
• pp.381-384
• /
• 2006

This study was conducted to selected Korean black raspberry (Rubus coreanus Miq.) for high productivity. The eight major agronomic traits were investigated from 198 clones of the clone bank established in Korea Forest Research Institute, Suwon, Korea. The selection levels based on number of fruit per fructify lateral (NFFL) over 20, and fruit weight (FW) over 1.3g, and yield of individual per fructify lateral (YIFL) over 25g, were applied on 198 clones, resulted in 17 clones selected. The selected superior trees, 17 clones, appeared regional differences for amount of fruiting among 4 different test sites. When number of fruit per fruit petiole (NRFP), fruit weight (FW), yield of individual (YI) and sugar content were satisfied over 20, 1.4g, 6kg and 9.5 brix, respectively, as a select condition, 5 clones were reselected as the superior trees among 17 clones. for 3 years.

• Journal of Korean Society of Forest Science
• /
• v.59 no.1
• /
• pp.15-30
• /
• 1983

To select the superior clones of Populus alba ${\times}$ Populus glandulosa $F_1$, growth and some growth-related physiological characters were examined for thirteen, one-year-old and fifteen, two-year-old clones, respectively at the Seoul National University nursery in Suweon, Clonal differences in growth (total dry weight per tree), leaf area per tree and leaf chlorophyll content per tree at tow-year-old plots were highly significant at the 1% level, but not at one-year-old plots, Highly significant correlation was found between leaf area per tree and total dry weigh per tree (r=0.865), between leaf chlorophyll content per tree and total dry weight per tree (r=0.888), and between photosynthetic ability per tree and total dry weight per tree (r=0.745). The photosynthetic ability and leaf chlorophyll content per unit leaf area of one-year-old plant increased with increasing leaf order number from top. reached maximum value in the twenty-eithth and thirty-third leaves, respectively, and then decreased gradually from those leaved to base, Clones 68-1-54, 66-26-55 and 65-22-11 showed test growth based on leaf area per tree, leaf chlorophyll content per unit leaf area and photosynthetic ability of leaf tissue per unit area. Growth yield of populus alba ${\times}$ P. glandulosa $F_1$ clones could be estimated from either leaf area per tree of leaf chlorophyll content per tree. Therefore, measurements of leaf area and leaf chlorophyll content appear useful to select superior populus clones early growth.

• Journal of Biosystems Engineering
• /
• v.42 no.4
• /
• pp.276-282
• /
• 2017

Purpose: This paper presents the effects of soil drought stress during the growing season and pre-harvest period on tree growth and fruit quality of "Yumi" peach, an early season cultivar. Methods: Soil drought stresses were treated with four levels of -30, -50, -60, and -70 kPa during long term (LT) and short term (ST). For LT treatments, soil water was controlled for nine weeks from May 1 to July 5, which was assumed as the full growing season. For ST treatments, soil water was controlled for four weeks from June 10 to July 5, which was assumed as the pre-harvest season. Tree growth and leaf photosynthesis were measured, and fruit characteristics such as fruit weight and diameter, soluble solid and tannin contents, and harvest date were investigated. Results: Soil water deficit treatments caused a significant reduction in tree growth, leaf photosynthesis, and fruit enlargement. LT water stress over -60 kPa during the full growing season caused significant reduction in tree growth, including shoot length, trunk girth, leaf photosynthesis, and fruit enlargement. ST water stress over -60 kPa during the pre-harvest period also induced significant reduction in leaf photosynthesis and fruit enlargement, while tree growth was not reduced. In terms of fruit quality, water stress over -50 kPa significantly reduced fruit weight, increased soluble solid and tannin contents, and delayed harvest time in both LT and ST treatments. Conclusions: As a result, it is assumed that LT water stress over -60 kPa can reduce both tree growth and fruit enlargement, whereas ST water stress over -50 kPa can reduce fruit enlargement without reducing tree growth. From an agricultural perspective, moderate water deficit like -50 kPa treatments could have positive effects, such increased fruit soluble solid contents along with minimal reduction in fruit size.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.306-311
• /
• 2008

Proper tree vigor and crop load were determined for 'Fuji'/M.9 apple trees in high density planting system from 2001 to 2003. Leaf/fruit ratio was highly correlated to mean fruit weight (y=1.715x+205.02, $R^2=0.66^{**}$) and yield (y=-35.l56x+5963.7, $R^2=0.44^{**}$). In addition, there was a significant correlation between the number of leaves per tree and mean fruit weight. However, crop load did not affect tree growth, soluble solids content of fruit, and Hunter a value. To harvest the fruits heavier than 300 g without biennial bearing, it was appropriate to crop 55 to 64 fruits in a tree with 55 leaves per fruit of adult tree. The good indices for proper tree vigor could be 20 to 25 cm of mean shoot length and above 95% of shoot termination rate. Moreover, no secondary growth and 20 to 30% of spur formation could be the indices for highly productive tree vigor.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.3
• /
• pp.145-153
• /
• 2019

BACKGROUND: The 'Gamhong' cultivar, middle season apple with big fruit size and high soluble solid content, has been bred in Korea. However, it was hard to cultivate the cultivar in Korea by serious bitter pit. The relationships between shoot growth, fruit size, and bitter pit may be affected by crop load. This study was conducted for 2 years (7~8 years after planting) to investigate vegetative growth, fruit quality, bitter pit incidence, return bloom, and gross income for optimum crop load of 'Gamhong'/M.9 adult apple tree. METHODS AND RESULTS: The crop load was assigned to 4 different object ranges as follow: 45~64, 65~84, 85~104, and 105~124 fruits per tree. The vegetative growth, average fruit weight, percentage of fruits heavier than 375 g, soluble solid content, and return bloom increased significantly at the crop load range of 45~64 fruits. However, the lowest total gross income per tree may have been caused by the highest bitter pit incidence and the lowest yield per tree in any other crop load range. The total gross income and yield per tree increased significantly at the crop load range of 105~124 fruits and return bloom dropped to 40%, and hence it was possible to occur biennial bearing. It was 85~104 fruits that biennial bearing did not occur and total gross income was as high as the crop load range of 105~124 fruits. Also, the yield of high grade fruits per tree, with fruit weight of 400~499 g and none bitter pit on fruit surface, was highest at the crop load range of 85~104 fruits, compared to other crop load range. CONCLUSION: In considering fruit size, bitter pit incidence, return bloom, and gross income, the optimum crop load range of 'Gamhong'/M.9 adult apple tree in high density orchard was 85~104 fruits per tree.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.499-510
• /
• 2007

Shortest path tree(SPT) construction is essential in high performance routing in an interior network using link state protocols. When some links have new state values, SPTs may be rebuilt, but the total rebuilding of the SPT in a static way for a large computer network is not only computationally expensive, unnecessary modifications can cause routing table instability. This paper presents a new update algorithm, dynamic shortest path tree(DSPT) that is computationally economical and that maintains the unmodified nodes mostly from an old SPT to a new SPT. The proposed algorithm reduces redundancy using a dynamic update approach where an edge becomes the significant edge when it is extracted from a built edge list Q. The average number of significant edges are identified through probability analysis based on an arbitrary tree structure. An update derived from significant edges is more efficient because the DSPT algorithm neglect most other redundant edges that do not participate in the construction of a new SPT. Our complexity analysis and experimental results show that DSPT is faster than other known methods. It can also be extended to solve the SPT updating problem in a graph with negative weight edges.

• International Journal of Advanced Culture Technology
• /
• v.7 no.1
• /
• pp.8-13
• /
• 2019

Despite technical advances in healthcare, the rates of hospital-acquired pressure injury (HAPI) are still high although many are potentially preventable. The purpose of this study was to determine whether tree-based prediction modeling is suitable for assessing the risk of HAPI in ICU patients. Retrospective cohort study has been carried out. A decision tree model was constructed with Age, Weight, eTube, diabetes, Braden score, Isolation, and Number of comorbid conditions as decision nodes. We used RStudio for model training and testing. Correct prediction rate of the final prediction model was 92.4 and the Area Under the ROC curve (AUC) was 0.699, which means there is about 70% chance that the model is able to distinguish between HAPI and non-HAPI. The results of this study has limited generalizability as the data were from a single academic institution. Our research finding shows that the data-driven tree-based prediction modeling may potentially support ICU sensitive risk assessment for HAPI prevention.