• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.248-251
• /
• 2005

In this paper, health monitoring technique has been studied for performance deterioration caused by the defects of the gas turbine. The parameters for performance diagnostics have been extracted by using GSP program for modeling the target engine. The virtual sensor model for the health monitoring has been built of those data. The position and magnitude of the defects of the engine components have been determined by using Multiple Linear Regression technique and the method using the weight in order to diagnose the single and multiple defects.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.165-167
• /
• 2021

본 논문은 노약자와 장애인의 편의를 도모하기 위하여 주기적으로 약을 복용해야하는 시간을 알려주는 시스템이다. 무게 센서를 사용하여 7일간 복용해야 하는 알약들의 전체 무게를 측정하고, 사용자가 알약을 복용하면 줄어든 알약의 무게를 다시 측정하여 복용 여부를 판단하는 시스템이다. 또한 알약을 복용하지 않은 사용자에게 이를 알려주기 위해 설정된 특정 시간에 다시 알려주는 작업을 수행하도록 구성하였다. 본 논문에서는 시뮬레이션을 통하여 이와 같은 시스템의 작업 수행 과정을 세분화하여 보여줌으로써 사용자들이 잊지 않고 약을 복용하는 것을 도와주고자 한다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.6
• /
• pp.714-721
• /
• 2024

For weight reduction we have applied Ti-6Al-4V, a lightweight and high-strength material, to a high-pressure gas cylinder for rapid cooling airborne electro-optical/infrared sensors. We have designed, manufactured using electron beam welding, and evaluated various performance(e.g., proof pressure tests, cooling tests). As results, a weight reduction of approximately 29 % was achieved compared to the previous gas cylinder made of STS630. Additionally, representative micro-structures that improve mechanical properties, such as acicular α' phase Martensite and Widmanstatten structure, were observed in the fusion zone. Furthermore, the cooling performance was successfully met under even high-temperature conditions.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.161-166
• /
• 2006

A new fiber orientation sensor has been developed and tested on an actual paper machine to demonstrate its capability to function as a real-time monitoring system. First, we demonstrate the ability of the sensor system to detect the change in the fiber orientation angle while the sensor head, and not the paper, was intentionally rotated from $-90^{\circ}\;to\;+70^{\circ}$ with respect to the paper-traveling direction. Next, we demonstrate that this system can successfully detect the change in the magnitude and angle of fiber orientation in running paper when the direction of material flow on the wire was changed on the paper machine. The angle and magnitude of fiber orientation were independently confirmed by SST and MOA measurements. Furthermore, we found that the system was capable of measuring the basis weight and the moisture content of running paper while detecting the angle and magnitude of fiber orientation.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.125-128
• /
• 2003

Low-velocity impact damage is a major concern in the design of structures made of composite materials, because impact damage is hidden inside and cannot be detected by visual inspection. The piezoelectric thin film sensor can be used to detect variations in structural and material properties for structural health monitoring. In this paper, the PVDF and PZT sensors were used for monitoring impact damage initiation in Gr/Ep composite panel to illustrate this potential benefit. A series of impact test at various impact energy by changing impact mass and height is performed on the instrumented drop weight impact tester. The wavelet transform(WT) is used to decompose the piezoelectric sensor signals in this study. Test results show that the particular waveform of sensor signals implying the damage initiation and development are detected above the damage initiation impact energy. And it is found that both PZT and PVDF sensors can be used to detect the impact damage.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.766-768
• /
• 1998

Optical Temperature Distribution measurement System (OTDS) is completely different from conventional electric point sensor in that it uses the optical fiber itself as the sensor. This new concept in temperature measuring system requires only one fiber to be laid. The use of optical fiber also gives the advantage of small diameter, light weight, explosion resistance, and electromagnetic noise resistance. The OTDS is a sensor which is capable of making a precise measurement over a wide range of areas using only a single optical fiber. Since current temperature sensors, such as the thermocouple, are only used to measure temperaturea of point, they are almost impractical for measuring a wider range because of the extremely high cost. In comparision with current sensors, the optical fiber distributed temperature sensor can make much quicker and more precise measurements at a comparatively low cost.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.421-422
• /
• 2019

In this paper, we present the results of the implementation of the strain gauge sensor module which can be applied to measure the load weight in preparation for forklifts with high frequency of safety accidents in the industrial field. The sensor module consisted of strain gauge, LNA, LPF and ADC. In order to increase the accuracy and durability of the sensor, four sensors were inserted into four anchor bolts.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.5
• /
• pp.499-507
• /
• 2004

We have studied tile detection techniques, which can determine the location and the weight of an intruder into infrastructure, by using fiber-optic ROTDR (Rayleigh optical time domain reflectometry) sensor and fiber-optic BOTDA (Brillouin Optical time domain analysis) sensor, which can use an optical fiber longer than that of ROTDR sensor Fiber-optic sensing plates of ROTDR sensor, which arc buried in sand, were prepared to respond the intruder effects. The signal of ROTDR was analyzed to confirm the detection performance. The constructed ROTDR could be used up to 10km at the pulse width of 30ns. The location error was less than 2 m and the weight could be detected as 4 grades, such as 20kgf, 40kgf, 60kgf and 80kgf. Also, fiber optic BOTDA sensor was developed to be able to detect intrusion effect through an optical fiber of tells of kilometers longer than ROTDR sensor. fiber-optic BOTDA sensor was constructed with 1 laser diode and 2 electro-optic modulators. The intrusion detection experiment was peformed by the strain inducing set-up installed on an optical table to simulate all intrusion effect. In the result of this experiment, the intrusion effort was well detected as the distance resolution of 3m through the fiber length of about 4.81km during 1.5 seconds.

• Journal of KIISE:Information Networking
• /
• v.35 no.1
• /
• pp.21-33
• /
• 2008

The wireless sensor nodes near to the fixed sink node suffer from the quickly exhausted battery energy. To address this problem, the mobile sink node has been applied to distribute the energy consumption into all wireless sensor nodes. However, since the mobile sink node moves, the data collection scheduling scheme is necessary for the sink node to receive the data from all sensor nodes as fair as possible. The application fields of wireless sensor network need the real-time processing. If the uneven data collection occurs in the wireless sensor network, the real-time processing for the urgent events can not be satisfied. In this paper, a new method is proposed to support the lair data collection between all sensor nodes. The proposed method performs the scheduling algorithm based on the resident time of the sink node staying in a radius of communication range and the amount of data transferred already. In this paper, the proposed method and existing data collection scheduling schemes are evaluated in wireless sensor network with the mobile sink node. The result shows that the proposed method provides the best fairness among all data collection schemes.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.27-33
• /
• 2009

The emergences of GeoSensor and researches about GIS have promoted many researches of u-GIS. The disaster application coupled in the u-GIS can apply to monitor accident area and to prevent spread of accident. The application needs the u-GIS DSMS technique to acquire, to process GeoSensor data and to integrate them with GIS data. The u-GIS DSMS must process big and large-volume data stream such as spatial data and multimedia data. Due to the feature of the data stream, in u-GIS DSMS, query processing can be delayed. Moreover, as increasing the input rate of data in the area generating events, the network traffic is increased. To solve this problem, in this paper we describe TRIGGER ACTION clause in CQ on the u-GIS DSMS environment and proposes data source management. Data source weight table controls GES information and incoming data rate. It controls incoming data rate as increasing weight at GES of disaster area. Consequently, it can contribute query processing rate and accuracy