• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.565-571
• /
• 2023

With the introduction of the post-verification system, the measurement of floor impact noise performance on-site has become mandatory, and the evaluation method has changed. To track the performance changes since the policy implementation, research is needed on how the characteristics of heavyweight impact sound change according to the varied evaluation method. In this study, we analyzed the contribution rate of the frequency band-specific sound pressure level on the single-number quantity for a multi-family housing unit with the same floor plan and floor structure, comprising 59 households, based on the changed impact sources and evaluation indicators. It is difficult to compare simply because the method of calculating contributions by frequency band according to the single-day evaluation is different, but the average contribution rate of 63 Hz was 80.8 % in the evaluation method before the introduction of the post-confirmation system (Tire measurement and evaluated as L'_i,Fmax,AW), and the average contribution rate of 125 Hz was 19.2 %. The current evaluation method (rubber ball measurement and evaluation as L'_iA,Fmax) shows that the contribution rate has decreased to 33.1 % on average at 50 Hz ~ 80 Hz, 58.7 % on average at 100 Hz ~ 160 Hz, 6.9 % on average at 200 Hz ~ 315 Hz, and 1.3 % on average at 400 Hz ~ 630 Hz. This result is a case analysis for the target apartment house, and it is necessary to analyze measurement data for more diverse apartment houses.

• Journal of Animal Science and Technology
• /
• v.65 no.6
• /
• pp.1242-1253
• /
• 2023

The present study aimed to investigate the feasibility of using a diet low in lysine content as a means for increasing the intramuscular fat (IMF) content and pork muscle quality of finishing pigs. Thirty-two crossbred gilts and barrows weighing approximately 80 kg were fed either a low-lysine diet (0.60%; Low-lys) or a control diet (0.80% lysine; Med-lys) under a 2 × 2 factorial arrangement of treatments. The animals were slaughtered at a 132-kg body weight (BW) on average, followed by physicochemical analyses and sensory evaluation on Longissimus lumborum (LL) and Semitendinosus (ST) muscles. The average daily gain (ADG) did not differ between the Med-lys and Low-lys groups. However, ADG exhibited a tendency of sex × diet interaction (p = 0.09), being greater for barrows vs. gilts on the Low-lys diet (p < 0.05), but not on the Med-lys diet. Backfat thickness adjusted for 132-kg BW also exhibited the interaction; it was greater for the Low-lys vs. Med-lys group within gilts but tended to be less for the former in barrows (p = 0.08). The IMF content was not influenced by the diet or sex in either LL or ST. The a^*, b^*, and Warner-Bratzler Shear Force values and fatty acid composition were influenced by the sex or diet in either or both of the muscles, but the treatment effects did not apparently influence the meat quality. Sensory scores for the flavor, juiciness, tenderness, umami, and palatability of cooked muscle were not influenced by the diet in either LL or ST. When the LL and ST data were pooled, scores for those sensory attributes were positively correlated with the IMF content, which was associated with overall greater IMF contents and greater sensory scores for ST vs. LL. Collectively, the Low-lysine diet seemingly elicited the intended lysine deficiency in gilts as indicated by the increased BFT due to the diet. However, the Low-lys diet was not effective for increasing the IMF deposition or eating quality of the pork muscle of finishing pigs slaughtered at high BW probably because its lysine content was not low enough to elicit either outcome.

• Journal of Internet Computing and Services
• /
• v.24 no.6
• /
• pp.73-80
• /
• 2023

The recent steep increase in the minimum hourly wage has increased the burden of labor costs, and the share of unmanned stores is increasing in the aftermath of COVID-19. As a result, theft crimes targeting unmanned stores are also increasing, and the "Just Walk Out" system is introduced to prevent such thefts, and LiDAR sensors, weight sensors, etc. are used or manually checked through continuous CCTV monitoring. However, the more expensive sensors are used, the higher the initial cost of operating the store and the higher the cost in many ways, and CCTV verification is difficult for managers to monitor around the clock and is limited in use. In this paper, we would like to propose an AI image processing fusion algorithm that can solve these sensors or human-dependent parts and detect customers who perform abnormal behaviors such as theft at low costs that can be used in unmanned stores and provide cloud-based notifications. In addition, this paper verifies the accuracy of each algorithm based on behavior pattern data collected from unmanned stores through motion capture using mediapipe, object detection using YOLO, and fusion algorithm and proves the performance of the convergence algorithm through various scenario designs.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.44-49
• /
• 2023

In the global pursuit of carbon neutrality, the rapid increase in the adoption of electric vehicles (EVs) has led to a corresponding surge in the demand for batteries. To achieve high efficiency in electric vehicles, considerations of weight reduction and battery safety have become crucial factors. Copper and aluminum, both recognized as lightweight materials, can be effectively joined through laser welding. However, due to the distinct physical characteristics of these two materials, the process of joining them poses technical challenges. This study focuses on conducting simulations to identify the optimal laser parameters for welding copper and aluminum, with the aim of streamlining the welding process. Additionally, a Graphic User Interface (GUI) program has been developed using the Python language to visually present the results. Using machine learning image data, this program is anticipated to predict joint success and serve as a guide for safe and efficient laser welding. It is expected to contribute to the safety and efficiency of the electric vehicle battery assembly process.

• Journal of the Korean Dietetic Association
• /
• v.29 no.4
• /
• pp.211-229
• /
• 2023

This study analyzed the differences in the general characteristics, mental and health-related factors, eating habits, and nutrient intake of Korean male youths before and after the outbreak of the coronavirus disease 2019 (COVID-19). The data of a total of 1,231 subjects, from among the participants in the 2018 and 2020 Korea National Health and Nutrition Examination Survey (KNHANES), were analyzed. The 2020 group had fewer married members than the 2018 group. The subjects in the 2020 group weighed more (P<0.05), had a higher waist circumference (P<0.01), and showed greater weight gain (P<0.05) than the 2018 group subjects. The aerobic physical activity of the 2020 group was lower (P<0.01) compared to the 2018 group. The members of the 2020 group had higher depression scores (P<0.01), suicidal tendencies (P<0.01), and need for counseling for mental problems (P<0.05) than those of the 2018 group. The prevalence of high fasting blood sugar levels and diabetes was higher in the 2020 group compared to the 2018 group. The frequency of breakfast (P<0.01) and dining out (P<0.001) and the proportion of breakfast (P<0.01) and dinner (P<0.05) taken with the family or non-family members was lower in the 2020 group than in the 2018 group. The rate of dietary supplement intake of the 2020 group was higher than that of the 2018 group (P<0.01). There were significant differences in the protein (P<0.05), riboflavin (P<0.01), and carbohydrate (P<0.01) intakes between the two groups. These results suggest that male youths had a higher waist circumference and high levels of depression, and showed a decrease in frequency of breakfast intake and dining out after the out break COVID-19 pandemic. Therefore, nutrition and health promotion programs are urgently needed to improve mental health, other health-related factors and nutritional status of male adults that are associated with the COVID-19 pandemic.

• Journal of the Korean Geosynthetics Society
• /
• v.23 no.2
• /
• pp.53-62
• /
• 2024

Recently, development of non-traditional energy such as oil sands has been actively conducted in the cold region such as Canada. Frozen soil has different thermal and mechanical characteristics from general soil due to its high organic contents. This study evaluated the impact of organic matter content on the thermal and mechanical behavior of frozen soil samples collected from Alberta, Canada, and Gangwon Province, South Korea. As the organic content increases, the maximum dry unit weight decreases and the optimum moisture content increases in compaction tests. In uniaxial compression tests under frozen conditions, the strength of the frozen specimens increased as the temperature decreased. The strength of Canada soil sample increased with higher organic matter content at low temperatures. However, the strength of frozen soil was not significantly affected by organic matter content due to the complex behavior and unfrozen water content. Thermal conductivity tests showed higher thermal conductivity in frozen conditions compared to unfrozen conditions, due to the higher thermal conductivity of ice compared to water. These findings provide essential data for geotechnical design and construction in large-scale projects such as oil sands development in cold regions. Further research is needed to explore the impact of organic matter content on different types of frozen soils.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.15 no.3
• /
• pp.133-139
• /
• 2010

Marine algal flora and community structure were investigated at four sites in Kijang area on the southern east coast of Korea in August 2006 and August 2009, respectively. A total of 54 seaweeds including 6 green, 10 brown, 38 red were collected and identified. Of 54 seaweeds, 35 species were found throughout the survey period. Mean biomass in wet weight was from $616.0\;g\;m^{-2}$ to $1,462.4\;g\;m^{-2}$2 in 2006, and $354.8\;g\;m^{-2}$ to $965.6\;g\;m^{-2}$ in 2009. Maximum biomass was recorded at Mundong site, and minimum was recorded at Seoam (2006) and Dongbaek (2009) sites. The flora investigated (2006, 2009) could be classified into six functional groups such as coarsely branched form (58.7%, 58.1%), thick leathery form (10.9%, 11.6%), filamentous form (13.0%, 9.3%), crustose form (6.5%, 9.3%), sheet form (6.5%, 7.0%) and jointed calcareous form (4.3%, 4.7%) during survey period. The R/P, C/P and (R+C)/P values reflecting flora characteristics were 4.00, 0.75 and 4.75 at 2006, and 5.17, 1.00 and 6.17 at 2009, respectively. Therefore, the number of marine algae species and biomass in Kijang area were similar when they were comparing with the previous data. It suggest that any changes of seaweed diversity have not been observed in Kijang coastal area before and after the anthropogenic construction between 2006 and 2009.

• Journal of The Korean Association For Science Education
• /
• v.28 no.1
• /
• pp.32-46
• /
• 2008

The purpose of this study was to analyse the qualitative and quantitative characteristics of paper-pencil tests for exploring its appropriateness as a selection tool of the gifted in science. For this purpose, we developed two (internal and external) item analysis frameworks, and applied these frameworks to analyse qualitative characteristics. Also, we analysed the relationship between two characteristics. The results of analysing qualitative characteristics revealed that the portion of items with acceleration context exceeding middle school curriculum level was relatively large, which caused low content validity. Furthermore, there was considerable deviation in content and context by subject matter and year, which caused test unstability. Items measuring knowledge domain was the most prevalent, and too much weight on data interpretation & analysis domain in inquiry process skills. In case of creativity test, the portion of items measuring convergent thinking was much larger than that of divergent or associative thinking. Most of these items were represented by using pictures and tables rather than using graphs. Item types of multiple-choice and short answers were superior to essay types. Discrimination index, on the whole, was appropriate (above 0.3), but item difficulty showed a vast deviation ($0.01{\sim}0.90$). Correlation coefficients among subject matters and test tools were very low, and test reliabilities were also low. Low item difficulty & high discrimination index item types were distinguishable. Items with acceleration context were more discriminating than enrichment context. Implications of developing quality paper-pencil test items in the selection of gifted students are discussed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.343-370
• /
• 2023

Developing improved wheat varieties is vital for global food security to meet the rising demand for food. Therefore, assessing the genetic diversity across wheat genotypes is crucial. This study examined the diversity of 168 durum wheat and 47 common wheat collections from 54 different countries using twelve agro-morphological parameters. Geumgang, a prominent Korean common wheat variety, was used as a control. Both qualitative and quantitative agronomical characteristics showed wide variations. Most durum wheats were shown to possess dense spikes (90%), while common wheats showed dense (40%) or loose (38%) spikes, with yellowish-white being the dominant spike color. The majority of the accessions were awned regardless of wheat type, yellowish-white being the main awn color. White or red kernels were produced, with white kernels dominating in both common (74%) and durum (79%) wheats. Days to heading (DH) and days to maturity (DM) were in the ranges of 166-215 and 208-250 days, respectively, while the culm length (CL), spike length (SL), and awn length (AL) were in the ranges of 53.67-163, 5.33-18.67, and 0.50-19.00 cm, respectively. Durum wheats possessed the shortest average DH, DM, and SL, while common wheat had the longest CL and AL (p < 0.05). Common wheats also exhibited the highest average one-thousand-kernel weight. Hierarchical cluster analysis, aided by principal component analysis, grouped the population into seven clusters with significant differences in their quantitative variables (p < 0.05). In conclusion, this research revealed diversity among common and durum wheat genotypes. Notably, 26 durum wheat and 17 common wheat accessions outperformed the control, offering the potential for developing early-maturing, high-yielding, and lodging-resistant wheat varieties.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.4
• /
• pp.365-372
• /
• 2024

The South Korean marine industry is emerging as a significant market, driven by the growing popularity of various water leisure activities, including sailing. This trend suggests a rising demand for sailing yachts. Consequently, since 2022, the design and development of a 28ft sailing yacht have been ongoing, supported by the government and the Ministry of Oceans and Fisheries, to promote yachting culture in South Korea. The Velocity Prediction Program (VPP) analysis was conducted using WinDesign during the preliminary design stage to evaluate performance and determine design parameters. The hydrodynamic model used for this vessel is based on regression methods developed from years of experience in naval architecture and yacht research at the Wolfson Unit, providing reliable estimates for most modern yachts. However, owing to the lack of specific hydrodynamic data from towing tank tests or CFD numerical analysis, verification of the hydrodynamic model has faced some challenges. Additionally, an incomplete weight estimate resulted in variable VCG values, potentially affecting stability and overall performance. The optimal boat speed for this vessel was determined at true wind speeds (TWS) of 4, 8, 12, 16, and 20 knots, using both the jib (up to 120° TWA) and the spinnaker (from 80° TWA). The optimized speed of the yacht was found to be comparable to that of international similar-class yachts.