• Bulletin of the Korean Chemical Society
• /
• v.19 no.8
• /
• pp.868-874
• /
• 1998

An equivalent retention has been experimentally observed in thermal field-flow fractionation (ThFFF) for different polymer-solvent systems. It is shown that iso-retention between two sets of polymer-solvent systems can be obtained by adjusting the temperature difference (ΔT) according to the difference in the ratio of ordinary diffusion coefficient to thermal diffusion coefficient. This method uses a compensation of field strength (ΔT) in ThFFF at a fixed condition of cold wall temperature. It is applied for the calculation of molecular weight of polymers based on a calibration run of different standards obtained at an adjusted AT. The polymer standards used in this study are polystyrene (PS), polymethylmethacrylate (PMMA), and polytetrahydrofuran (PTHF). Three carrier solvents, tetrahydrofuran (THF), methylethylketone (MEK) and ethylacetate (ETAc) were employed. Though the accuracy in the calculation of molecular weight is dependent on the difference in the slope of log λ vs. log M which is related to Mark-Houwink constant a, it shows reasonable agreement within about 6% of relative error in molecular weight calculation for the polymer-solvent systems having similar a value.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.2
• /
• pp.43-48
• /
• 2021

In this study, an analysis was performed using the growth data and environment data of Korean melon farmers to confirm the influence of environmental factors variables on fruit weight of Korean melon. The analysis results can be summarized as follows. First, it was confirmed that humidity and temperature were recognized as the most important factors among the core factors of korean melon farm production management. Second, The correlation analysis of fruit weight and environmental factors showed a statistically significant soil temperature, internal humidity. Third, The Pooled OLS model estimation results showed that the estimation coefficient for soil temperature is (-), and the estimation coefficient for soil temperature square is (+), indicating that optimal control temperature exists.

• Journal of Ginseng Research
• /
• v.17 no.3
• /
• pp.219-223
• /
• 1993

Assessment of root weight grade system for the numeral definition in Korea ginseng was tried by investigation of 13 boxes of the 15-root-grade of 4-year-old white ginseng as a model. In this case satisfaction to theoretical value was 58% in root weight and 50% in root number. The coefficient of variation (CV) was high (35%) for individual root weight in package. The CV of tap root weight 1 among package is low (7.1%) even though there was no significant correlation between tap root weight : and lateral root weight among roots. The mean percentage of tap root to root weight in each package ranged 61 to 74% with CV range of 16.5 to 33.2%. The CV was not much different between 1st and 2nd lateral root weight and the means was above 60%. Strict practice of numeral definition of root weight grade system will be prerequisite for chemical standardization of Korea ginseng.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.6
• /
• pp.502-510
• /
• 2018

In order to accumulate data to lower the friction coefficient of a press mold, tribological tests were performed before and after coating SM45C with a PVC/PO film and plasma coating (CrN, concept). The ultrasonic nanocrystal surface modification (UNSM)-treated material had a nano-size surface texture, high surface hardness, and large and deep compressive residual stress formation. Even when the load was doubled, the small amount of abrasion, small weight of the abrasion, and width and depth of the abrasion did not increase as much as those of untreated materials. A comparison of the weight change before and after the tribological test with the CrN and the concept coating material and that of the untreated material showed that the wear loss of the concept coating material and P-UNSM treated material (that is, the UNSM treated material treated with the concept coating) showed a tendency to decrease by approximately 55-75%. Concept 100N had a lower friction coefficient of about 0.6, and P-UNSM-30-100N showed almost the same curve as concept 100N and had a low coefficient of friction of about 0.6. The concept multilayer coating had a thickness of $5.32{\mu}m$. In the beginning, the coefficient of friction decreased because of the plasma coating, but it started to increase from about 250-300 s. After about 350 s, the coefficient of friction tended to approach the friction coefficient of the SM45C base metal. The SGV-280F film-attached test specimen was slightly pushed back and forth, but the SM45C base material was not exposed due to abrasion. The friction coefficient was 0.22, which was the lowest, and the tribological property was the best in this study.

• Journal of Biosystems Engineering
• /
• v.30 no.5 s.112
• /
• pp.285-292
• /
• 2005

Extrusion process and physical properties of extrudates of pulp powder (TMP, thermomechanical pulp fibers) mixed with expanding additives was evaluated to develop biodegradable packaging materials. To find out the optimum condition, the status of extrusion process, coefficient of elastic and expansion ratio of extrudates were tested on the composites (wheat flour, soluble starch, polyvinyl alcohol), blending conditions of composites and moisture contents of extrudates. In case of material composition, wheat flour played a key role to keep extrusion process irrespective of the added amounts of soluble starch and polyvinyl alcohol. The coefficient of elastic of extrudates was increased and the expansion ratio was reduced as the added amounts of wheat flour increased. Also, the coefficient of elastic of extrudates was decreased as the moisture content of extrudates increased. The lowest coefficient of elastic was 439.55 kPa under the condition, of pulp powder mixed with $20\%$ of wheat flour based on pulp weight and $10\%$ of soluble starch based on wheat flour weight and controlled $20\%$(wb) of moisture content.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.3
• /
• pp.110-114
• /
• 2008

In this study, to examine the friction coefficient and wear amount of dental prosthesis, pin-on-disk type wear test were at room temperature. Vickers hardness and fracture toughness measurement of dental materials were preformed. Microscopic observations on worn surfaces of specimens were conducted by SEM. The friction coefficient of dental material was investigated according to weight and slinging velocity. dental material have investigated composed to nature teeth.

• Korean Journal of Poultry Science
• /
• v.44 no.4
• /
• pp.259-265
• /
• 2017

This study was to investigate the effect of chick weight in the early growth period on market-weight of Korean native chickens (KNCs). We measured the body weights of 1,087 chickens (male 479, female 608) of 13 KNC strains at 1-84 days of age at two week intervals. The growth performance of the 13 KNC strains was investigated. Correlation coefficients among the weights of chickens in each growth period and regression of market-weight on early chick weights were analyzed. The results showed that the average body weight of 70-day-old KNCs was 1,962g: 2,154g and 1,819.7g for males and females, respectively. The equation for regression of body weight on age was estimated as $\hat{Y}=0.1347X^2+18.738X-40.134$ ($R^2=0.9418$). Using this regression equation, the duration required to attain a KNC market-weight of 2 kg was estimated as 71.8 days. All the correlation coefficients between early chick weight and market-weight were significantly positive. Although the correlation coefficients among the chick weights in each growth period decreased with increase in age interval, early growth weight had a significant effect on late growth performance. The correlation coefficient between market-weight at 70-days and chick weight at 1-day was estimated to be a low as 0.10-0.13. In the estimations of market-weight correlation coefficients, correlation coefficient and coefficient of determination were high in the female and male chicks after 28-days and 42-days of age, respectively. The results of the analysis of correlation and regression between early chick weight and market-weight of KNCs showed that market-weight could be predicted based on the weights of 28-day-old females and 42-day-old males.

• Kyungpook Mathematical Journal
• /
• v.49 no.2
• /
• pp.393-401
• /
• 2009

By introducing a parameter and estimating the weight coefficient, we obtain a new Hilbert-type integral inequality with a composite kernel and a best constant factor. As applications, we also consider its equivalent forms and reverse forms.

• Reproductive and Developmental Biology
• /
• v.37 no.3
• /
• pp.123-127
• /
• 2013

The objective of this study was to compare the effects of the levels of inbreeding on body weight traits between two breed populations, Hanwoo and Korea Brindle cattle. Birth weight (BW), weaning weight (WW), body weight at 6 months of age (W6) and yearling weight (YW). Records of 1,745 calves (1,513 from Hanwoo, and 232 from Korea Brindle calves) were collected from Livestock Research Institutes in Kangwon, Gyeongbuk and Chungbuk provinces. The least squares means (LSM) and their standard errors for BW, WW, W6 and YW were $25.4{\pm}0.1$ kg, $81.0{\pm}1.8$ kg, $146.1{\pm}3.7$ kg and $291.5{\pm}2.4$ kg, respectively in Hanwoo calves and $22.6{\pm}0.3$ kg, $79.9{\pm}2.3$ kg, $137.6{\pm}4.6$ kg and $249.3{\pm}6.6$ kg, respectively in Korea Brindle calves. Pedigree data showed that 14.8% (316 out of 2131) of Hanwoo was inbred and the average inbreeding coefficient was 0.0209 (2.09%). Inbreeding coefficients of ten calves out of 316 total inbred Hanwoo calves were 12.5% or higher, whereas those of the other 306 calves were less than 12.5%. In both breeds, calves were divided into three groups of inbreeding classes - highly inbred group($F{\geq}0.125$), lowly to medially inbred group(0

• Journal of Korean Society of Forest Science
• /
• v.84 no.2
• /
• pp.166-177
• /
• 1995

This study was carried out to discuss how soils in the area planned for a forest road construction can be mechanically tested and practically applied. For this, 16 soil test samples from 8 plots(2 samples per plot) were used. The major tests are focused on unit weight before and after cut, water content, liquid and plastic limits, sieve and hydrometer analysis etc. The total unit weight(${\rho}_t$) before and after cut are $1.69g/cm^3$ and $1.19g/cm^3$, respectively. Their water contents are 21.0% and 20.5%. The coefficient of uniformity U and coefficient of curvature C obtained from sieve and hydrometer analysis are 125 and 0.42, which mean generally not well graded. On the soil classification by USCS, SM(silty sand or silt-sand mixed soil)is a Key soil, but it seems to be not good for fill material. From the standard proctor test are resulted $1.40{\pm}0.065g/cm^3$ for the unit weight(${\rho}$) in the nature and $1.88{\pm}0.049g/cm^3$ for the optimum proctor unit weight(${\rho}pr$) each. With this to say, it is necessary more powerful compaction work at earth filling, with which this soil reachs enough the ${\rho}pr$, and more earth.