• Journal of the Ergonomics Society of Korea
• /
• v.35 no.6
• /
• pp.493-501
• /
• 2016

Objective: This study analyzes the effect of angle conditions of rehabilitation equipment used for supporting hemiplegic patients on their rehabilitation training for standing action. The study was performed by adjusting the rear angle of seat inclination through a motion analysis. Background: Owing to a loss of muscle rigidity and degradation of muscle control ability, hemiplegic stroke patients suffer from asymmetrical posture, abnormal body balance, and degraded balance abilities due to poor weight-shifting capacity. The ability to shift and maintain one's weight is extremely essential for mobility, which plays an important role in our daily life. Thus, to improve patients' ability to maintain weight evenly and move normally, they need to undergo orthostatic and ambulatory training. Method: Using a motion analysis system, knee movements on both hemiplegic side and non-hemiplegic side were measured and analyzed in five angles ($0^{\circ}$, $10^{\circ}$, $30^{\circ}$, $50^{\circ}$, $70^{\circ}$) while supported by the sit-to-stand rehabilitation equipment. Results: The knee movements on both sides increased as the angle increased in angle support interval to support a hemiplegic patient's standing up position. In standing up interval, a hemiplegic patient's knee movement deviations on both sides decreased, and the movement differences between hemiplegic and non-hemiplegic legs also decreased as the angle increased. Conclusion: The results of this study showed that the rehabilitation effectiveness increases as the angle increases, leading to a balanced standing posture through the decrease of movement difference between hemiplegic and non-hemiplegic sides and an improved standing up ability through the increase of knee movement on both sides. However, angles higher than $50^{\circ}$ didn't provide a significant effect. Therefore, a support angle under $50^{\circ}$ was proposed in this study. Application: The results of this study are expected to be applicable to the design of sit-to-stand support equipment to improve the effectiveness of the rehabilitation process of hemiplegic patients.

• PNF and Movement
• /
• v.17 no.1
• /
• pp.93-101
• /
• 2019

Purpose: This study aimed to investigate lower extremity muscle activation to the variable weight shift on the affected side of patients with hemiplegia. Methods: Eighteen patients with chronic hemiplegia volunteered to participate in this study. All participants performed three types of weight shift (sideways, forward, and backward) in limits of stability on the affected side. Muscle activation in a paralyzed leg was measured with electromyography on the gluteus medius, tensor fasciae latae, rectus femoris, and biceps femoris; furthermore, the attached area was recommended by SENIAM projects. Each weight shift was performed three times, and then the mean value of the three measurements was analyzed. The data were analyzed by measuring the symmetrically standing position with the reference voluntary contraction (RVC) and was standardized with the percentage of RVC method. Results: No significant difference in lower extremity muscle activation occurred according to the three types of variable weight shift. However, significant differences in lower extremity muscle activation did occur with each weight shift position. In addition, activation increased at the rectus femoris and decreased at the gluteus medius and tensor fasciae latae. Conclusion: Hip abductor muscle strength training and variable weight shifts on the affected side must increase to improve patients'balance and limits of stability.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.78-86
• /
• 2019

Recently, IoT researches using sensor data based on embedded networks in various fields including healthcare and sports have been continuously attempted. This study analyzes golf ball mobility to support IoT application in golf sports field. Generally, since the difference in density occurs due to the condition of the inner material and the abnormal state at the time of the outer skin joining during the manufacturing of the golf ball, the weight of each subset is equal for any two points with the same radius in the sphere cannot be guaranteed. For this reason, the deflected weight of the sphere has the undesirable effect of hitting the ball in a direction in which the weight of the ball is heavy. In this study, it is assumed that there is a unique center of gravity of the ball, and even if the golf ball cannot be manufactured perfectly, it wants to establish the basic principle to accurately recognize or mark the putting line based on the center of gravity. In addition, it is evaluated how the mobility of the golf ball with a deviation from the center of gravity of the golf ball affects the progress path (or movement direction) and the moving distance (or carry distance) after the golfer hits. The basic model of the mobility of the golf ball can help the golfer exercise model and the correlation analysis. The basic model of the mobility of the golf ball can help the golfer exercise model and the correlation analysis.

• PNF and Movement
• /
• v.22 no.2
• /
• pp.213-222
• /
• 2024

Purpose: The purpose of this study was to evaluate the effects of early body-weight-supported treadmill training on quadriceps strength, knee pain, and arthrogenic muscle inhibition (AMI) after knee surgery. Methods: Sixteen adults were selected. Seven patients in the experimental group performed body-weight-supported treadmill training, and nine patients in the control group performed general therapeutic exercise programs. Both groups received 20 minutes of neuromuscular electrical stimulation and 20 minutes of exercise therapy for two weeks. We measured quadriceps strength, visual analogue scale, and modified AMI classification grade before and after the intervention. Data were analyzed using the Mann-Whitney U test and Wilcoxon signed-rank test. Results: Within the experimental group, significant differences were observed in quadriceps strength, visual analogue scale, and modified AMI classification grade. Significant differences were observed between the before- and after-intervention groups in quadriceps strength and visual analogue scale. However, no significant differences were found in the modified AMI classification. Conclusion: The results of this study indicate that early body-weight-supported treadmill training may be an effective intervention for improving strength, reducing pain, and addressing arthrogenic muscle inhibition following knee surgery.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.121-134
• /
• 2006

The purpose of this study was to analyze the effect of different types of rehabilitation training program on the kinetic and kinematic parameters during sit-to-stand movement(STS) in chronic stroke patients. Two groups of hemiparetic patients, experimental and control, participated in the study. The experimental group participated in a 10-week training program (three sessions/wk, $1{\sim}1.5\;hr/session$) consisting of a warm-up, aerobic exercises, lower extremity strengthening. and a cool-down. The control group participated in an aerobic exercise. Three dimensional kinematic analysis and force platform; were used to analyze the duration of STS, lower extremity angle, and weight bearing ability. The experimental group which had more strength of lower extremity displayed decrease in duration of STS. However, the control group showed increases in duration during sit-to-stand movement. The control group flexed their trunk more than the group did Therefore, it took more time to extend their trunk during STS. The duration in sit-to-stand was affected by the strength of lower extremity and the angle of trunk movement. The angles of ankle and knee joint had an influenced on duration of STS. The post experimental group performed with their feet near the front leg of the chair during sit-to-stand, therefore the duration was decreased. The repetitive sit-to-stand movements as a resistance exercise was effective to hemiparetic patients in learning mechanism of sit-to-stand. The control group showed decreased differences in the vertical ground reaction forces between paretic and non-paretic limbs. Their training program included strengthening exercise that may help improving weight bearing ability. The control group showed increases in the center of pressure in the anteroposterior and mediolateral displacement. This means that the stability of movement was low in the control group. Their training program which combined aerobic and strengthening exercises that are more effective to improve the stability of movement.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.86-91
• /
• 2009

Purpose: The whole body scan in Nuclear Medicine is a widely accepted examination and procedure. Especially, it is mainly used in bone, I-131, MIBI, and HMPAO WBC scans. The diverse uses of the whole body scan range from the HMPAO WBC scan with a speed of 13cm/min, to a whole body bone scan using the Onco. Flash technique with a speed of 30cm/min. The accuracy of table movement has a strong correlation with the image quality, and inaccuracy of speed could negatively affect the image quality. The purpose of this study is to evaluate the accuracy of the table movement while considering the influence of the age of the equipment and the variability in the weight of the patients. Material and Methods: The study was conducted using two of Seoul Asan Medical Center's SIEMENS gamma cameras which are commonly used in our whole body study. The first one is the oldest gamma camera, an ECAM plus (installed in 2000), and the last is brand new one, a SYMBIA T2 (installed in 2008). Three trials were conducted with the tables moving at a different speed each time; 10, 15 and 30 cm/min. The tables' speeds were measured by checking how long it took for the table to move 10cm, and this was repeated every 10cm until the table reached 100 cm. With an average body weight of the patients of about 60~70 kg, the table speed was measured with weights of 0 kg, 66 kg and 110 kg placed on the table, then compared among conditions. Results: The coefficient of variance (CV) of the ECAM plus showed 1.23, 1.42, 2.02 respectively when the table movement speeds were set at 10, 15, and 30 centimeters per minute. Under the same conditions, the SYMBIA T2 showed 1.23, 1.83 and 2.28 respectively. As table movement speed more, the variance of CV as the speed increases. When the patient body weight was set to 0, 66 and 110kg, the CV values of both cameras showed 0.96, 1.45, 2.08 (0 Kg), 1.32, 1.72, 2.27 (66 Kg) and 1.37, 1.73, 2.14 (110 Kg). There was no significant difference (p>0.05) in 95 percent of confidence intervals and measured CV values were acceptable. However, the CV value of the SYMBIA T2 was relatively larger than the ECAM plus. Conclusion: The scan speed of the whole body scan is predetermined based on which examination is being performed. It is possible for the accuracy of the speed to be affected, such as the age of the equipment, the state of the bearings or the weight of a patient. These factors can have a negative impact on the diagnostic consistency and the image quality. Therefore, periodic quality control should be needed on the gamma cameras currently being used, focusing on the table movement speed in order to maintain accuracy and reproducibility.

• PNF and Movement
• /
• v.15 no.1
• /
• pp.77-84
• /
• 2017

Purpose: This study aimed to investigate the effect of visual feedback training-for gradual weight shift in sit-to-stand training-on the balance and walking abilities of chronic hemiplegia patients. Methods: Twenty patients with chronic hemiplegia volunteered to participate in this study. The experimental group received visual feedback for gradual weight shift in the sit-to-stand training, while the contrast group followed the standard process for the sit-to-stand training. The evaluation of the balance and walking ability was conducted with the functional reach test (FRT), Berg balance scale (BBS), five time sit-to-stand (FTSTS) test, timed up and go (TUG) test, 10 m walk test (10MWT), balancia, activities-specific balance confidence (ABC) scale, and falls efficacy scale (FES). Results: In the results before and after intervention, there was a significant difference in TUG, 10MWT, ABC, and FES in the visual feedback training group (p < 0.05). In the control group, there was a significant difference in the 10MWT and ABC (p < 0.05). Also, in the evaluation of the postural fluctuations, the control group data showed a significant increase in Covar. The visual feedback group showed a significant difference in the W average. Conclusion: The visual feedback training group showed some improvement in terms balance and walking ability and on the ABC scale and FES. Therefore, if the diagonal progressive weight bearing exercise is combined with the various patterns and basic principles of PNF, it may be a more efficient intervention method.

• PNF and Movement
• /
• v.12 no.1
• /
• pp.13-17
• /
• 2014

Purpose: To determine the normative data for the correlation of spinal, pelvic parameters with foot pressure in the young subjects. Methods: The subjects of this study were 39 patients in healthy adults. The Formetric-III was used to measure of spinal alignment. The pedoscan was used to measure of foot pressure. The correlation of trunk imbalance, trunk inclination, lateral deviation with foot pressure. The foot pressure measurement was consisted of maximal/mean pressure, weight contribution. Result: There was a negative correlation of trunk inclination with Max_R. There was a negative correlation of trunk inclination with Max_R. There was a positive correlation of trunk imbalance with Max_L. There was a positive correlation of lumbar lordosis with Mean_R_front, Lt. posterior weight distribution. There was a negative correlation of lumbar lordosis with Lt., Rt. in distribution There was a negative correlation of pelvic tilt with Mean_R_front, Lt. posterior weight distribution. There was a positive correlation of pelvic tilting with Rt. weight distribution, Lt. posterior weight distribution. There was a negative correlation of pelvic torsion with Lt. weight distribution, Rt. posterior weight distribution. There was a negative correlation of pelvic rotation with Lt. weight distribution, Lt. posterior weight distribution. Conclusion: The data obtained from the study may be used for future studies related to correlation of the spinal, pelvic deviation with foot pressure.

• Science of Emotion and Sensibility
• /
• v.9 no.2
• /
• pp.119-132
• /
• 2006

The dimensions of affection structure from hand movements was developed for the purpose of understanding relationship between affective words and physical factors to apply it to computing environment. To analyze hand movements, three dimensions -direction, time, weight- were found through reconstructing sub-properties of Laban Movement Analysis. The direction dimension has five freedoms of movement (horizontal, vertical, sagittal, circular, shaking) while the time and weight dimensions both have two sub categories each, (sudden, sustained), (light, strong) respectively. By factorial design using the three dimensions, twenty movement were videotaped. Participants rated a list of fifty korean affective words on each twenty movements. The results were studied by nonlinear principal component analysis. The results suggested that time and weight dimensions are closely related with arousal level dimension of affection. Strong and sudden movements associated with highly aroused affection, while light and sustained movements associated with the opposite affection. The direction sub-dimensions were found to be associated with the kinds of affection. Linear movements like horizontal, vortical and sagittal direction were correlated to highly aroused negative affection. Circular movements were found to correlate closely by fun and delight on the graph, while shaking movements were correlated to anxiety and impatience. These results imply that the dimensions of affection structure and sub-properties of hand movements are closely connected with each other.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.808-811
• /
• 2009

Robovie-R2 [1], developed by ATR, is a 110cm high, 60kg weight, two wheel drive, human like robot. It has two arms with dynamic fingers. It also has a position sensitive detector sensor and two cameras as eyes on his head for recognizing his surrounding environment. Recent years, we have carried out a project to integrate new functions into Robovie-R2 so as to make it possible to be used in a dining room in healthcare center for helping serving meal for elderly. As a new function, we have developed software system for adaptive movement control of Robovie-R2 that is primary important since a robot that cannot autonomously control its movement would be a dangerous object to the people in dining room. We used the cameras on Robovie-R2's head to catch environment images, applied our original algorithm for recognizing obstacles such as furniture or people, so as to control Roboie-R2's movement. In this paper, we will focus our algorithm and its results.