• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.651-658
• /
• 2004

In this study, we introduced the spiral pipe nailing system (refer as SPN system) with self drilling method, can apply to ground which is hard to keep shape of bore hole, and performed limit equilibrium analysis with simplilied trial wedge method while length ratio and bond ratio were altered to evaluate slope stability considered of tensile strength and bending stiffness. A newly soil nailing system named as the SPN system is respected to reduce displacement of nail and increase global slope stability. And effects of various factors related to the design of the SPN system, such as the type of drilling method and the bit, are examined throughout a series of the displacement-controlled field pull-out tests. 6 displacement-controlled field pull-out tests are performed in the present study and the volume of grouting arc also evaluated based on the measurements. In addition, short-term characteristics of pull-out deformations of the newly proposed SPN system are analyzed and compared with those of the general soil nailing system by carrying out the displacement-controlled field pull-out tests.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권4호
• /
• pp.1685-1689
• /
• 2016

Physical wedges still can be used as missing tissue compensators or filters to alter the shape of isodose curves in a target volume to reach an optimal radiotherapy plan without creating a hotspot. The aim of this study was to investigate the dosimetric properties of physical wedges filters such as off-axis photon fluence, photon spectrum, output factor and half value layer. The photon beam quality of a 6 MV Primus Siemens modified by 150 and 450 physical wedges was studied with BEAMnrc Monte Carlo (MC) code. The calculated present depth dose and dose profile curves for open and wedged photon beam were in good agreement with the measurements. Increase of wedge angle increased the beam hardening and this effect was more pronounced at the heal region. Using such an accurate MC model to determine of wedge factors and implementation of it as a calculation algorithm in the future treatment planning systems is recommended.

• Nuclear Engineering and Technology
• /
• 제30권3호
• /
• pp.245-261
• /
• 1998

In order to validate the variable aperture channel model that can deal with the non-uniform How rate in flow domain, migration experiments of conservative tracer were performed in two artificial fractures, a parallel and a wedge-shaped fracture. These different fracture shapes were designed to give different flow pattern. The fractures were made from a transparent acrylic plastic plate and a granite slab with dimensions of 10 $\times$ 61 $\times$ 61 cm. Uranine (Fluorescein sodium salt) was used as a conservative tracer. The volumetric flow rates of uranine feed solution were 30 mL/ hr, giving a mean residence time in the fracture of approximately 24 hours for the parallel fracture and 34 hours for the wedge-shaped fracture. The migration plumes of uranine were photographed to obtain profiles in space and time for movement of a tracer in fractures. The photographed migration plume was greatly affected by the geometric shape of fractures. The variable aperture channel model could have predicted the experimental results for the parallel fracture with a large accuracy. It is expected that the variable aperture channel model would be effective to predict the transport of the contaminant, especially, with the flow rate variation in a fracture.

• 대한조선학회논문집
• /
• 제31권1호
• /
• pp.121-132
• /
• 1994

본 연구에서는 선저보강판부재의 좌초시 손상거동특성을 규명하기 위하여 시리즈 실험을 수행하였다. 즉, 강체웨지가 선저보강판을 연직방향에서 준정적으로 진입할 때 여러가지 파라메타 즉 1) 판의 종횡비, 2)웨지각도, 3)판두께, 4)웨지형상 및 5)종 횡보강재의 변화에 따른 시리즈 실험을 수행하고, 좌초시 선저보강판의 좌초하중-진입량 관계와 흡수에너지-진입량 관계 등에 관한 파라메타들의 영향을 분석하였다.

• 한국수자원학회논문집
• /
• 제42권11호
• /
• pp.1005-1015
• /
• 2009

해안대수층의 염수침투에 의한 담수-염수 경계면 특성을, 가로 140 cm, 세로 70 cm, 두께 10 cm 의 직사각형 모래수조 모형을 이용하여 모의하였다. 대수층 모형의 특성과 염수의 염도에 따른 총 31가지의 실험을 수행하였으며, 위치흐름 해석법을 유도한 Glover (1959)의 이론식과 호도그래프를 이용한 Henry (1959) 해석식 및 위치흐름 해석법을 이용한 Strack (1976)의 해석해 결과와 비교하였다. 대수층의 수리전도도, 해수의 염도, 그리고 해안가 지표경사에 따른 담수-염수 경계면의 위치와 기울기를 모의하였다. 다공질매체의 수리전도도와 해수의 염도가 높을수록 평형을 이루려는 담수-염수의 수위비($H_F/H_S$)가 높아지고, 이에 따라 경계면이 염수조 방향으로 이동하였다. 또한 염수조 방향의 모래사면의 경사가 급해질수록 경계면의 기울가가 완만하게 형성되었다.

• 소성∙가공
• /
• 제8권2호
• /
• pp.178-187
• /
• 1999

The Cross rolling between flat jaws, as a kind of hot forging, is the forming method to make the axisymmetric multi-step shaft by its rotation and pressure between flat jaws which move in opposite direction. The purpose of this study is to propose the optimal geometric data for shape development of the forward forming region. All data described on this paper are quantified by experiment from initial shape design to final shape development. As the result, proper geometric data are proved that lenth of the first forming area in the forward forming region is 1.5 times larger than circumference of work-piece and the progress angle changes 3 times smoothly.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권1호
• /
• pp.55-61
• /
• 2011

Conventional slinding genioplsty has the risk of mental nerve injury after operation and difficult to correct vertical asymmetry of chin. So, authors propose a new genioplasty to correct asymmetry of chin. Switching genioplasty is a modification method of conventional genioplasty. Between mandibular right and left canine, osteotomy line of triangular shape make until mandibular lower border. In large side, osteotome line of wedge shape is added to reduction. After osteotomy, segment of wedge shape was separated from chin. Distal segment was rotated to reduction side. Because of rotation of distal segment, space is made in opposite side. Seperated segement of wedge shape from large side is switched this space to fill. So, stability of distal segment is achieved. Authors applied to swiching genioplasty the patients who was remained the chin asymmetry after both sagittal split ramus osteotome was done because mandible asymmetry. After operation, patient and operator were satisfied with excellent esthetic results without any other complication. The switching genioplasty is effective surgical technique for chin asymmetry because it has more advantages than conventional sliding genioplasty. First, other donor side does not need for bone graft. Second, the switching genioplasty can reduce infection, bone resroption, dehiscence, capsular contraction after allograft. Third, have little mental nerve damage. Forth, anteroposterior correction is possible. Fifth, operation time is less than other genioplasty for chin asymmetry.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.717-722
• /
• 2013

In this study, we investigated the design of a wire wedge bonding ultrasonic tool horn using finite element method (FEM) simulations. The proposed method is based on an initial design estimate obtained by FEM analysis. An ultrasonic excitation causes various vibrations of a transducer horn and capillary. A simulated ultrasonic transducer horn and resonator are then built and characterized experimentally using a laser interferometer and electrical impedance analyzer. The vibration characteristics and resonance frequencies close to the exciting frequency are identified using ANSYS. FEM analysis is developed to predict the resonance frequency of the ultrasonic horn and use it in the optimal design of an ultrasonic horn mode shape.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.479-484
• /
• 2003

In this paper, film thickness and temperature distribution are measured in EHL point contact at high slip ratios. Infrared temperature mapping with two band pass fillers. proposed by Ausherman (1976). is used to measure temperature distribution. And the optical interferornetric method with two filters (red and green filters) is used to measure film thickness. Result of experiment showed that temperature rising at film and ball surface occurred very dramatically in Dimple zone. As slip velocity, slip ratio and load increased, size of Dimple and temperature rising became more large In addition, Position and shape of Dimple we changed by slip ratios, and increasing of Dimple size decreased traction coefficient. In short, it is appointed that the Dimple phenomenon be developed by the effect of viscosity wedge.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.817-832
• /
• 2021

In this paper, a simple practical method to estimate the drag of Super-Cavitating Underwater Vehicles (SCUV) is proposed that can obtain the drag with only principal dimensions in an initial design stage. SCUV is divided into cavitator, forebody, afterbody, base, and control fin and the drag of each part is estimated. The formulas for the drag coefficient are proposed for the disk and cone type cavitators and wedges used as control fins. The formulas are a function of cavitation number, cone or wedge angle, and Reynolds number. This method can confirm the drag characteristics of SCUV that the drag hump appears according to the coverage of the body by the cavity and the cavitator drag remains only when the entire body is covered by cavity. Applying this method to SCUV of various shapes, it is confirmed that the effects of cavitating and non-cavitating conditions, cavitator and body shape, and speed could be found.