Abstract
Saltwater intrusion in coastal aquifer was investigated using a laboratory model. Salt-wedge profiles were reproduced in a porous media tank 140 cm long, 70 cm high, and 10 cm wide. The experiments were performed with various conditions of porous media hydraulic conductivity, salinity, and ground surface slope to assess relationships on salt wedge location and inclination. Salt-wedge profiles induced by saltwater intrusion were observed in porous media equilibrium state, and compared with previously derived formulas of the Glover (1959), Henry (1959) and Strack (1976). It was found that salt-wedge shape and formations were affected by the water level ratio ($H_F/H_S$) due to high hydraulic conductivity, saltwater salinity and ground surface slope. High $H_F/H_S$ of porous media having high hydraulic conductivity shifted the saltwater interface toward the saltwater reservoir. Increasing surface slope of the porous media caused the salt-wedge profile inclination to decrease. Saltwater salinity also contributed to the location of saltwater interface, yet the impact was not more significant than hydraulic conductivity.
해안대수층의 염수침투에 의한 담수-염수 경계면 특성을, 가로 140 cm, 세로 70 cm, 두께 10 cm 의 직사각형 모래수조 모형을 이용하여 모의하였다. 대수층 모형의 특성과 염수의 염도에 따른 총 31가지의 실험을 수행하였으며, 위치흐름 해석법을 유도한 Glover (1959)의 이론식과 호도그래프를 이용한 Henry (1959) 해석식 및 위치흐름 해석법을 이용한 Strack (1976)의 해석해 결과와 비교하였다. 대수층의 수리전도도, 해수의 염도, 그리고 해안가 지표경사에 따른 담수-염수 경계면의 위치와 기울기를 모의하였다. 다공질매체의 수리전도도와 해수의 염도가 높을수록 평형을 이루려는 담수-염수의 수위비($H_F/H_S$)가 높아지고, 이에 따라 경계면이 염수조 방향으로 이동하였다. 또한 염수조 방향의 모래사면의 경사가 급해질수록 경계면의 기울가가 완만하게 형성되었다.