• Korean Management Science Review
• /
• v.32 no.1
• /
• pp.35-47
• /
• 2015

The purpose of this paper is to find an optimal weaving connection method of sweater threads while weaving intarsia sweater by the genetic algorithm. The objective function was devised to minimize labor cost and lessen the amount of thread usage. In order to create the parental population group in the genetic algorithm, we developed five thread connection methods. Besides, elite chromosome screening methods for the offspring group was selected both to the whole chromosome thread elite and to a color-coded elite thread chromosome. Commonly used diamond pattern in Intarsia sweater manufacturing was applied to the experiments. The experimental results showed that thread system saved the labor and material costs than woven method under the existing software. When weaving Intarsia sweater in the field, we can apply the developed genetic algorithm to improve productivity of weaving connection method.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.4
• /
• pp.68-76
• /
• 2004

Inherent strain method for analyzing deformation of line-heating is substituting experiments of high cost, because of its high accuracy and quickness. Nowadays, the progressing forms of line-heating are not straight moving motions used to traditional studies, but weaving motions which can diversely input heat source. In shipyard, reasons of weaving motions are induction of a special characteristic by water cooling, maximum temperature limitation for keeping plates from melting, and rhythm for workman's maintaining velocity. On this study, a method which can obtain optimal weaving heating condition was presented, some examples were introduced, and the results corresponded to works of shipyard. Lastly, what the specifications of plates on efficiency are is presented, through the quality standard of shipyard and FEM heat transfer simulation. The ultimate purpose of line heating is the automation, so in case of plates which need weaving heating, the optimal heating condition suggested by this study can be used well in designing coil specifications of induction heaters which are heat input sources of new generation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.2
• /
• pp.186-193
• /
• 2024

Most fishing nets used in fish cage aquaculture are made of synthetic fibers such as polyamide (PA) and polyethylene (PE). Therefore, it is challenging to maintain the internal volume of the fish cage due to biofouling, which can increase the load on the cage or reduce dissolved oxygen levels by impeding smooth current flow. To address this issue, research has been conducted to replace conventional synthetic fiber cage nets with brass nets, demonstrating certain benefits such as improved productivity and ease of fish cage management. However, given the need for a more thorough examination of brass fishing net weaving technology and performance, this study assessed the optimal weaving method for brass fishing nets to be used in fish cages. Additionally, it provided essential data for the practical application of brass fishing nets by evaluating their weight, tensile strength, elongation, fatigue resistance, and wear resistance. The study concluded that weaving brass fishing nets using the chain link method ensures durability, ease of installation, and compact storage in a scroll-like form. Moreover, due to their superior fatigue and wear resistance properties, brass nets can offer increased utility if appropriate net diameter and length are selected to compensate for their higher weight per unit area and relatively higher cost compared to existing fiber fishing nets.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.3
• /
• pp.217-223
• /
• 2012

Objectives: This study was conducted to evaluate personal and area exposure of airborne nicotine during harvest and weaving tasks in tobacco farms. Methods: Nicotine was measured with NIOSH method 2551 and Passive sampler which was validated in previous papers for area and personal sampling. Results: The average (geometric mean) concentrations of nicotine with two different tasks in personal sample were 6.5 ${\mu}g/m^3$ (harvest), 32.6 ${\mu}g/m^3$ (weaving) and in area sample were 0.8 ${\mu}g/m^3$ (harvest), 57.2 ${\mu}g/m^3$ (weaving). There was significant difference in area sample between harvest and weaving task (p=0.000). Also, there was significant difference with personal sample (p=0.000). Conclusions: It was found that weaving task should be considered to be the first priority for reducing nicotine exposure.

• Textile Coloration and Finishing
• /
• v.12 no.3
• /
• pp.159-165
• /
• 2000

This study surveys the fabric mechanical properties according to the weaving design & finishing conditions of wool fabrics for quality control in the process. For this purpose, 8 kinds of Twill groups and 3 kinds of Plain groups weave fabrics, totally 428 woven fabrics are prepared with change of the yarn count, density and finishing method. Fabric thickness, bending rigidity, extensibility, shear rigidity, formability of the fabrics were measured and discussed with weaving design & finishing conditions.

• Journal of the Korean Society of Costume
• /
• v.54 no.7
• /
• pp.55-62
• /
• 2004

Research into the ancient dyeing and weaving culture is of critical importance to the fact that they constitute an integral part of the Korean costume. Due to the absence of the originals reflecting ancient costume cultures, it is difficult to figure out what the dyeing and weaving culture was like in ancient times. Because of limited visual materials available from the wall paintings of ancient tombs, studies conducted so far concerning the costume culture for the Goguryeo have focused on visual elements such as shape, structure, and type. As a result, research into ancient Korean dyeing and weaving cultures hasn't been properly made. Thanks to the presence of both some dyeing fabric originals from Goguryeo's neighboring countries and some visual materials like the wall paintings of the Goguryeo, it may be possible to obtain some clues to the dyeing and weaving culture. The dotted Pattern costumes were selected such as Muyongchong, No. 1 Jangcheon Tomb, Gakjeochong, Samsilchong, Ssangyeongchong, Susanri Tomb. According to a book titled ‘Hanwon’, the Goguryeo people manufactured fabrics in such a way that resist-dyed spots produced elaborate patterns over the purple fabric. It can be safely said that such dot patterns were produced by means of dyeing rather than weaving, because identical patterns aren’t well produced by means of painting and embroidery. Considering Goguryeo’s natural features, the dot patterns mentioned in historical literatures are thought to have been produced using animal’s skin. However, there is highest possibility that the dot Patterns were Produced using tie-resist dyeing or wax-resist dyeing techniques. With respect to the dyeing and weaving culture for the Goguryeo, one must refer to neighboring countries’ dyeing and weaving environments, given that the Goguryeo had engaged substantial cultural exchanges with China.

• Journal of Welding and Joining
• /
• v.15 no.6
• /
• pp.116-123
• /
• 1997

In GMA welding processes, bead contour and penetration patterns are criterion to estimate weld quality. Bead geometry is commonly defined with width, height and depth. When weaving is taken into account, selection of welding conditions is known to be difficult. Thus, empirical or trial-and-error method are usually introduced. This study examined the correlation of welding process variables including weaving parameters with bead geometry using srtificial neural networks(ANN). The main task of the Ann estimator is to realize the mapping characteristics from the sampled welding process variables to the actual bead geometry through training. After the neural network model is constructed, welding process variables for desired bead geometry is selected by inverse model. Experimental varification of the inverse model is conducted through actual welding.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.1
• /
• pp.162-170
• /
• 2001

In torch weaving in arc welding on V groove, the heat input distribution on groove surface is a main factor determining the bead shape and the weld quality with and without the weld defects such as undercut, overlap, etc. In this study, we calculate the heat input varying with the welding current, arc voltage, welding speed and the touch weaving condition using numerical method. And we investigate the heat input distribution on groove surface while applying the various grooves having 2 dimensional heat sources.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.3
• /
• pp.19-27
• /
• 2011

A weaving machine for texture industry uses a lot of needles and the nib of these needles is necessary to be kept with sharp edge. The re-grinding of the needle by a special purpose of the grinding wheel can be selected for achieving this aim. This study focused on the manufacture and performance assessment the special grinding wheel. A forming mold for the grinding wheel was designed and a sintering process for furnace process control was established. Manufactured wheels were tested for determining suitable grade of the wheel. The selection of optimal grinding conditions was achieved by a response surface method and a genetic algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.324-328
• /
• 1987

In this study a computer-aided textile pattern design system is implemented and a control methodology of a dobby motion is studied. The described system allows the user to design various weave patterns through graphic editor and to simulate weaving by displaying the dummy weaving process on the monitor. In addition, if the yarn colors are specified it is also possible to analyze color weaves. Thus it can replace effectively a conventional. design tool, a design paper. The main features of the system are to design weave patterns, to show weaving effect, and to make lifting plan for the dobby motion control. In dobby motion control, the mechanical. control method conventionally used is not adequate for the loom which is linked with the computer-aided textile pattern design system, so an electromagnetic control method is proposed.