• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.1
• /
• pp.73-80
• /
• 2008

Experimental study has been performed in order to construct the standard test methods and appraisal criteria by investigating the influence of specimen types(property, width, layers) and loading rate on the tensile characteristics of FRP used in strengthening RC structures. The FRP composite tested in this study are the unidirectional CFRP sheet/strip and the bidirectional GFRP sheet. Test variables consist of the various width ranging from 10mm to 25mm and number of CFRP sheets plied up to 5 layers. Test results indicated that maximum tensile strength and minimum coefficient of variation are recorded at each different width according to the fiber types and weaving directions. Also, the average tensile strengths of CFRP sheets are decreased as the number of layer of CFRP sheet are increased.

• Journal of the Korea Furniture Society
• /
• v.17 no.3
• /
• pp.95-111
• /
• 2006

These series articles were written in order to understand rockers of today and to provide basic data of their designs and manufacture studying pattern changes in the West. In the first article of the series reports we already described the theoretical background of rockers and the Windsor and the Boston style among the American classic rockers from the eighteenth to the twentieth century. This article contained the characteristics of the styles of the Shaker rocker, the Wicker rocker, and the Platform rocker. The three periods associated with furnituremaking in the Shaker sect are; the Primitive Era, which lasted from 1790 to 1820; the Classical Era, from 1820 to 1860; and the Final Phase, from 1860 to 1935. The important skills the Shaker needed to make the Shaker rocker are woodturning joinery, seat braid weaving and steam bending for the slats. The Wicker rocker continues to be extremely popular furniture style as the wicker proved equally effective for translating the ornate vine-like motifs popular among Art Nouveau proponents. The Wicker rockers were developed for child's, gentleman's and lady's, and it represents the most diverse forms among the above mentioned styles. However the rocker skates were often clumsy and took up too much room, preventing the chair from being shoved close to the wall and out of the way. These problems were overcome by the Platform rocker. The most important innovation was the technical development of a stationary base, which allowed the chair to rock noiselessly, without skating along the floor. The Modernism of the modern furnitures in America and Europe were affected by the characteristics of the Shaker rocker, the Wicker rocker, and the Platform rocker.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.321-322
• /
• 2006

In many manufacturing processes such as web formation, manufacturing of paper and nonwoven, fabric weaving, etc., planar sheets are transported and at the same time appropriate tension is imposed. The input material rolled up on beams is fed by unwinding the beam and the processed is then taken up on beams by winding it. While processed, the planar sheets are thrown under the processing load of impulse form, which causes irregular thickness of the processed sheet. To improve the quality of the product, a dynamic model is needed and the dynamic characteristics is to be analyzed by simulation. This study shows that density variation dynamics of the in-process-sheet in the machine direction can be described at each moment of disturbing impacts in forms of difference equations, while the impacts and tension, the time-dependency of the material properties were taken into account. Simulation showed the most serious variation of the density occurred in the process starting phase. The starting velocity curve with step form showed the least variation of the density. As the time order of the function of the starting velocity cure becomes higher, the density variation gets greater.

• Journal of Fashion Business
• /
• v.21 no.2
• /
• pp.105-112
• /
• 2017

A string wallcovering is a kind of textile wallcovering which is made of cellulose fiber yarn laminated on base paper. Compared with normal paper or PVC wallpaper, a string wallcovering is preferred continually in the interior design market, as it is not only environmentally friendly but it also has less cost on mass production without the weaving process and has a natural visual effect, excellent functionality such as thermo keeping, permeability, sound absorption. However, in the dyeing process, it is not appropriate to use plenty of energy such as water, electricity, steam or chemicals considering the environmental trend and the government policy plenty of energy such as water, electricity, steam or chemicals. Currently, a string wallcovering is made of raw white yarn and padding with direct dye or pigment which includes toxic elements, especially the use of direct dye is restricted in a part of the developed country due to inclusion of azo. In this study, we researched dyeing based on cold pad batch dyeing of a string wallcovering with reactive dyestuff. The peel strength and bending depth test confirmed that the optimum adhesive type and spread amount improved the water resistance of the string wallcovering. Also, pad batch dyeing with optimum reactive dyestuff enhanced the color fastness to light and rubbing in dry and wet conditions. Additionally, for improvement of color fastness to rubbing in a wet condition, the additional treatment finishing without soaping process which is used water. The results of this study can be used as basic data for environmentally friendly and energy saving of the textile wallcovering.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.47-56
• /
• 2008

Generally, accident exposure at intersections is relatively higher than that at roadway segments due to more possibility of merging, diverging, turning, crossing, and weaving maneuver. Furthermore, the traffic accident rate at intersections has been rapidly increasing since 1990's. Since there is more opportunity of conflict at unsignalized intersection, frequency and severity of traffic accident are more severe than signalized intersections. The purpose of the study is to analyze factors causing vehicle crashes and provide intersection design guidelines to improve intersection safety. For this study, vehicle to vehicle crash data of 116 rural 3 legs unsignalized were collected and field surveys were conducted for traffic and geometric conditions. Ordered probit models were developed to analyze the severity of crashes. It was found that weather, obstacles in minor roadsides, presence of major exclusive right lane, presence of major road crosswalk, difference between posted speed of major road and minor road, land-use around intersections, shoulder width of major road, ADT of major road are significant factors for intersection safety.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.3
• /
• pp.359-370
• /
• 2011

This study analyzes the textiles design of natural indigo dyed products in Korea and Japan. In this study, a total of 556 Korean natural indigo dyed products, and 2,730 Japanese natural indigo dyed products were used for analysis. The subjects of this study were 556 natural indigo dyed products and 2,730 Japanese natural indigo dyed products selling natural indigo dyed products which were found using search engine keywords of natural indigo dyeing and natural dyeing. Research and analysis was treated regarding the products, items, patterns, and the representation techniques of the patterns. The results of this study are as follows. In the pattern used for natural indigo dyed products, 71.4% of Korean products have no pattern, but 77.1% of Japanese products have patterns. On the representation techniques of the patterns, Korean products used tie-dyeing and a dip patterned fabric. While in the Japanese products, the most frequent patterning techniques were paraffin dye, followed by tie-dyeing, yarn-dyed and weaving, screen printing, and yarn-dyed and knitting. Regarding the kinds of patterns for natural indigo dyed products, only 8 kinds of patterns were used in Korean products; however, over 50 kinds of various patterns were used in Japanese products. Most patterns in the Korean products were ion patterns made by tie-dyeing. While in the Japanese products, the most frequent patterns were stripe patterns, followed by flower, dot, and ion patterns. Based on these research results, the problems of the textile design of Korean natural indigo dyed products were that most of the products have no pattern, and even though there were patterns, they lacked variations between the products. While in the case of Japan, they used the traditional and modem patterns of various textile representation techniques.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2770-2776
• /
• 2015

The development of efficient wearable antennas is required to implement short range body-centric wireless communication links for various internet of thing applications. We present simulation and measurement results of conductive-fiber-based wearable antennas which can comfortably fabricated directly on usual clothing materials. The proposed antenna is a form of a rectangular patch antenna designed by weaving conductive fibers on a felt substrate. A full-wave electromagnetic simulation tool is used to investigate the antenna performance such as antenna impedance, resonant frequency, and radiation efficiency. Parametric studies show that the radiation efficiency increases from 67.5% to 70.4% by widening the gap between conductive fibers from 0.25mm to 3mm. This implies a wearable antenna with good radiation efficiency can be designed despite of less portion of conductive fibers on the antenna. The simulation results are also verified by measured results with fabricated antennas.

• Journal of Fashion Business
• /
• v.20 no.2
• /
• pp.46-58
• /
• 2016

Architecture and Fashion mutually affects the shape and appearance of the other as an art of space according to the hybrid trends. Therefore, the purpose of this study is to find the correlations between the characteristics of traditional architecture types in Southeast Asia and modern fashion. Firstly, characteristics of the types obtained through the theoretical consideration of Southeast Asian architectural tradition include vertical, symmetrical, geometrical, epeated and continual structure. On the basis of these characteristics analyzed from 2013's S/S to 2015's F/W collection of Alexander McQueen, Gareth Pugh, Victor & Rolf, designers with strong creative and experimental minds who juxtaposed designs of two opposing points as well as hybrids since 2000, the following formativeness exists. First, the vertical structure of high floor is represented as a straight silhouette, a color contrast, vertical cut or wrinkle. Hence, it impresses verticality, rhythm, etc. Second, symmetrical structure of the gable roof is represented as a trapezoidal shape starting from the shoulder line or neck line widened into sleeves, impressing symmetry, dynamism, etc. Third, the geometry of the assembled is represented as vertical and horizontal bands or pattern pieces like puzzle, impressing geometry, three-dimensional, etc. Fourth, repeated structure of the weaving pattern is represented as repetitive patterns of woven fabric or printing techniques. Thus, it impresses repeatability, harmony, etc. And lastly, continuous group structure is represented as a connection of collars or hem-lines, as well as a crossing of fabric that impresses continuity, liquidity, etc.

• Journal of Fashion Business
• /
• v.22 no.2
• /
• pp.51-60
• /
• 2018

This research focuses on the development of upcycled denim fashion designs, whichis a more specific category within general upcycled fashion design. Characteristics of upcycled fashion design, which has been identified previously by researchers, include the following traits: environmentality, uniqueness, aesthetic appeal, availability, convertibility, and deconstructivity. The expression principles include recycling, substitution, recombination, and reduction. The result of the analysis of the denim fashion design characteristics, which is based on the theoretical analysis, has found. The external expression pattern consists of the deconstruction and reconstitution of materials, the avant-garde style and convertibility, the ability to mix and match materials and techniques, the production of zero waste, and the use of layering. The expression techniques used included decomposition, depaysement, weaving, cut-off, collage, assemblage, overlapping, connecting, attaching, and stitching. The inner meanings were identified as economicality through recycling, convertibility through rearranging, and the rarity and value of hand-made products. The result of the research applying the identified characteristics are as follows. First, developing and creating designs using modified denim and sub-materials with various expression patterns and techniques could provide completely new images unlike existing denim products. Second, modifying the details while maintaining the basic format of denim clothing could provide unique and new possibilities for upcycled denim fashion design. Third, environment-friendly models with creative designs were developed by recycling used denim materials. This reduced waste and energy while maximizing the use of resources. This study expects contribute to upcycled fashion design research by recognizing the unique characteristics and value of denim material.

• Journal of Fashion Business
• /
• v.22 no.2
• /
• pp.1-13
• /
• 2018

3D printing technology, which is expected to play a leading role within the Fourth Industrial Revolution, is becoming distinguished not only in the space, automotive, medical and engineering industries, but also in the area of design. The fashion and textile structures created by 3D printing technology were classified into three types - basic structure, unified structure, and a new physical structure. When traditional weaving, knitting, and stitching was reinterpreted through 3D printing, there were apparent limitations in reproducing the characteristics of fabric structures due to differences in the materials and structures of traditional textiles. New physical structures are being developed to break away from merely reproducing traditional textile structures, and to bring out the characteristics of 3D printing technology. As examples of new physical structures, there are the kinematics structure which utilizes the hinge method, mesostructure cellular material, and the N12 disk structure. Such techniques potentially open a new paradigm of fashion and textile structures. Some innovative aspects of 3D printing technology may result in changes in the methods of collaboration, manufacturing, and distribution. Designers are receiving help from specialists of various backgrounds to merge 3D printing technology to create original works. Also, 3D printing not only makes personalized custom designs available, but shortens the distribution channels, foretelling a change within the fashion and textile industry.