• 한국지형학회지
• /
• 제25권1호
• /
• pp.47-65
• /
• 2018

Frost shattering has traditionally been considered as one of the most effective process in rock weathering. Each slab specimens of five or six rhyolite, basalt and tuff was prepared and put in freeze-thaw cycles and repeated 300 times in the temperature of $-25^{\circ}C$ to $+30^{\circ}C$ and their weathering patterns and products were analyzed by surface observation, particle size, XRD and thin section. As the result, some changes were observed in weathering patterns and weathering products. Rock shattering was more active in waterlogging rather than atmospheric conditions, but there are many differences depending on the type of rock. Rhyolite is hardly weathered by 300 times freeze-thaw cycles and generates the least amount of weathering products. Weathering of Basalt is limited to the surface layer where water can be absorbed, and produces a few amount of platy-shape debris. Tuff are separated by blocky structure which the particles are aggregated along their edges rather than enlarged existing cracks/joins or generated new joints.

• 한국가구학회지
• /
• 제25권3호
• /
• pp.233-237
• /
• 2014

The eco-friendly preservatives such as ACQ or CUAZ have been used in landscape architectural facilities these days. In this study, the decay efficacies of ACQ treatments were evaluated according to domestic veneer species, concentration of ACQ, weathering test, adhesive type, and fungus type. In case of veneer species, hinoki cypress and yellow poplar showed the highest and lowest decay resistance, respectively. And the decay resistance appeared to be greater in plywoods bonded by resorcinol resin-bonded plywood and non-weathering treated plywood than polyurethane resin-bonded plywood and weathering treated plywood.

• 자원환경지질
• /
• 제32권1호
• /
• pp.101-111
• /
• 1999

Sedimentary organic matter, exposed to continental surficial environment, reacts with oxygen supplied from the atmosphee and forms carbon-containing oxidation products. Knowledge of the rate and mechanisms of sedimentary organic matter weathering is important because it is one of the major controls on atmospheric oxygen level through geologic time. Under the abiological conditions, the oxidation rate of coal organic matter by molecular oxygen is enhanced by the increase of oxygen concentration and temperature. At ambient temperature and pressure, aqueous coal oxidation results in the formation of dissolved $CO_2$ dissolved organic carbon and solid oxidation products which are all quantitatively significant reaction products. The effects of pH, ultraviolet light, and microbial activity on the weathering of sedimentary organic matter are poorly contrained. Based on the results of geochmical and environmental studies, it is believed that the photochemical reaction should play an important role in the decomposition and oxidation of sedimentary organic matter removed from the weathering profile. At higher pH conditions, the production rate of DOC can be accelerated due to base catalysis. These high molecular weight oranic matter can react with man-made pollutants such as heavy metal ions via adsorption/desorption or ion exchange reactions. The effect of microbial activity on the oxidative weathering of sedimentary organic matter is poorly understood and remains to be studied.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.69-70
• /
• 2017

In Korea, silicone type sealant is widely used for construction site. Before the silicone type, urethane type is one of the main type sealants. However, the weathering property is less than the silicone type, the urethane type is replace by the silicone one. Still the urethane type is used for the inside of the buildings for the perimeter of the window. The silicone type sealants are better in weathering property than those of the urethane type sealants. Except the weathering property urethane type sealant has its own advantage like movement property, low cost and so forth. There are many research results for the outdoor weathering of the sealants, but in Korea there are no results for the outdoor weathering for construction sealants. This research is focused on the outdoor weathering of the urethane sealants, how to measure the degradation, and compare the products which used in Korea. The outdoor weathering test is usually time consuming, thus we designed specialized device for accelerating the result.

• Journal of the Korean Wood Science and Technology
• /
• 제45권5호
• /
• pp.483-494
• /
• 2017

본 총설에서는 목재의 기상열화 특성(색상, 목재표면의 미세구조 및 화학적 변화)과 국제적으로 다양하게 이용되는 내후성시험방법에 관한 국제적 연구동향에 대하여 보고한다.

• 한국광물학회지
• /
• 제9권2호
• /
• pp.64-70
• /
• 1996

Early weathering products of anorthosite were investigated by using scanning electron microscopy in order to trace the development of halloysite particles and aggregates. Tiny short tubes or spheres precipitate on the plagioclase surface in the initial stage of weathering and form the compact globular aggregates. With continued growth, several globules are coalesced into wrinkled halloysite aggregates, and short tubes or spheres in globules grow into long tubes forming sheaf-like aggregates. Particle shape of halloysite varies with changing supersaturation degree of weathering solution, and determines the morphology of halloysite aggregates.

• 대한지리학회지
• /
• 제28권2호
• /
• pp.99-111
• /
• 1993

풍화작용은 여러 영역에 의해 지배를 받고 있으며 지형형성작용 중 가장 기본이 된다. 우리나라와 같이 화강암류로 구성된 지역에서는 다른 암석류로 구성된 지역보다 풍화작용이 활발히 진행되어 풍화산물이 많이 존재한다. 본 연구에서는 화강암 풍화산물이 형성된 영역과 기계적 풍화지수 및 특성을 살펴보았다. 그 결과 토화학적 풍화작용은 clayey gruss에서, 지화학적 풍화는 gruss에서, 쪼개짐작용은 풍화암석에서 강하게 작용하고 있었다. 기계적 풍화지수는 일반적으로 clayey gruss 계통은 5내외이고 gruss는 10내외 정도이었다. 그리고 입자붕괴는 풍화작용과 열수작용에 의해 형성되었으며, 세립질로 구성된 식토계통은 주로 열수영역을 많이 받았고 조립질로 구성된 사토계통은 풍화작용을 강하게 받았다.

• 산업기술연구
• /
• 제22권B호
• /
• pp.13-20
• /
• 2002

The purpose of this study is to investigate the effect of acid fog on the rust formation behavior of weathering steel (SMA50) which is used in uncoated bridges. Weathering steel didn't form the passive film under the environment of acid fog(pH5,6), whereas the environment of distilled water formed the protective oxide film. Therefore, the construction of weathering steel under the environment extremely exposed to SOx and NOx which are the main compositions of acid fog is not adequate. Fatigue limits of weathering steel under acid fog environment are remarkably decreased as compared with environment of distilled water. The corrosive constituents in acid fog has piled up the corrosion products on specimen surface and generated the corrosion pits. Because of the high stress concentration arising at this corrosion pit, relatively low fatigue limits were obtained for acid fog specimens.

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.13-20
• /
• 2008

The purpose of this study is to investigate the effect of acid fog on the rust formation behavior of weathering steel (SMA50) which is used in un-coated bridges. Weathering steel didn't form the passive film under the environment of acid fog(pH5,6), whereas the environment of distilled water formed the protective oxide film. Therefore, the construction of weathering steel under the environment extremely exposed to SOx and NOx which are the main compositions of acid fog is not adequate. Fatigue limits of weathering steel under acid fog environment are remarkably decreased as compared with environment of distilled water. The corrosive constituents in acid fog has piled up the corrosion products on specimen surface and generated the corrosion pits. Because of the high stress concentration arising at this corrosion pit, relatively low fatigue limits were obtained for acid fog specimens.

• 한국광물학회지
• /
• 제17권1호
• /
• pp.85-97
• /
• 2004

경주시 양남면의 해안단구퇴적층에 풍부히 함유된 혼펠스 자갈의 풍화작용을 X선회절분석, 주사전자현미경관찰, 화학분석을 이용하여 조사하였다. 분석결과, 혼펠스 자갈 풍화 초기에 사장석이 가장 먼저 용탈되어 공극을 형성하며, 그 후 풍화가 진행됨에 따라 흑운모는 흑운모-버미큘라이트 혼합층(hydrobiotite)으로 그리고 녹니석은 녹니석-버미클라이트 혼합층 광물로 변질되며, 사장석의 풍화산물로 할로이사이트가 부분적으로 침전되었다. 그러나 석영과 K장석은 거의 변질되지 않았다. 단구의 고도 차이에 따른 풍화각 두께와 생성되는 광물종의 차이가 인지되었다. 하부의 제2단구에서는 대체로 사장석의 약한 풍화작용이 주를 이루고 흑운모와 녹니석의 풍화작용은 관찰되지 않았으나, 상부의 제3단구에서는 사장석의 심한 풍화작용과 함께 흑운모와 녹니석이 혼합층으로 풍화되었다. 그러나 동일 단구퇴적층내에서도 풍화각 두께와 생성되는 광물종의 변화가 있으며, 이는 국지적인 지형변화에 따른 배수조건의 차이에 기인한 것으로 보인다.