• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.4
• /
• pp.375-385
• /
• 2013

This study evaluates correlation between petrographic characteristics and weathering grade of low-graded metasedimentary rocks mainly consisting of phyllite. Weathering grade of rock material was determined based on the results of geological survey. The Schmidt hammer test was carried out to obtain estimates of strength of rock materials. Point counting and microscopic observation were also conducted to analyze mineral composition and to measure spacing of foliation for 9 rock specimens. As a result of microscopic analysis, as the weathering grade was lower, the quartz was found more in quantity, consequently making rock stronger against weathering process. On the other side, lower weathering grade of rock resulted in less content of mica which is weak against weathering process. In addition, the rock materials with closer foliation spacing are found to be weaker in strength and have higher weathering grade.

• Explosives and Blasting
• /
• v.22 no.2
• /
• pp.33-43
• /
• 2004

The six grades weathering system is normally used in weathered rock classification. In this study. fresh and weathered rock block of grade I to V were sampled in Jang-soo ana but samples of the grade VI was omitted from this study. The variation quantities of chemical weathering indices with weathering degree are smaller than those of physical and mechanical properties. Increase of Weathering degree is well indicated by physical and mechanical properties such as strength, hardness, ultrasonic velocity and slake durability result. Especially, absorption and porosity ratio is a good indicator. As weathering proceeds. a number of the cracks affect the rock deformation. Therefore, stress-strain curves of weathered rocks in unconfined state are quite different from ones of fresh rocks.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.882-889
• /
• 2004

Wetness index obtained from topography data of Woogak Mountain was compared with chemical alteration index(CAI), clay minerall contents of rock, and magnetic susceptibility changes of outcrops, and they show a close interrelationship. It is shown that the wetness index can be used as a quantitative indicator of the weathering degree of rocks. Moreover, wetness index simulate quantitatively the hydrologic condition of the local area. Therefore, it is anticipated that wetness index can be used as the data that calculate the weathering speed of rock and weathering grade in the study of weathering sensitivity of rock.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.5
• /
• pp.17-25
• /
• 2016

The rocks exposed on the surface undergo expedite weathering process due to the effects of climatic process, etc. and the weathering process changes the properties of minerals, thereby lowering the stability of rocks. Therefore, it is important to examine the composition of minerals in order to investigate the resistance of rocks against weathering, which is performed by weathering sensitivity analysis. And microscopic flaking test was performed for the bored samples in this study and the composition of minerals that are vulnerable to weathering was measured through mode analysis. The lithological and mineralogical weathering factors were evaluated through this process. Furthermore, the degree of progress of weathering was identified by quantitatively measuring the actual mineral composition of rocks through X-Ray diffraction analysis and identifying the secondary minerals through observation with a scanning electron microscope. This analyzing the weathering sensitivity was analyzed to be capable of determining appropriate indicators that can determine weather resistance and predicting the weathering grade using chemical weathering speed.

• Tunnel and Underground Space
• /
• v.19 no.3
• /
• pp.213-225
• /
• 2009

The purpose of the study is to evaluate the effects of chemical weathering on the granite and orthogneiss in Wonju area based on accelerated artificial chemical weathering. The rock samples were scrutinized the variation of index properties and ion exchanges caused by artificial chemical weathering which was implemented with leaching test for 170 days using double soxhlet extractor. The differential weathering and decrease of p wave velocity were obtained by weathering process without significant changes of porosity. In case of granite samples, the uniaxial compression strength was reduced by 20% and 16% for the F-grade and SW-grade, respectively. For MW-grade granite, however, was not able to examine the effect of strength reduction due to lack of sample number. Also, for orthogneiss, it is difficult to compare the values of uniaxial compressive strength between before and after the test because of its strong anisotropy.

• 보존과학연구
• /
• s.28
• /
• pp.39-58
• /
• 2007

The Seated Buddha image carved on rock surface of Yuneulgok in Bae-ri, Gyeongju constituted of alkali feldspar granite. There is surface weathering by abrasion, exfoliation and break out. As a result various experiment was carried out testing rock material property to quantitatively grade weathering. Besides, this study is focused on properties of rock and correlation between things. Additionally, comparison of chemical properties to nondestructive weathering grade in the buddha image carved on rock. This result utilized on important resource for scientific conservation system compared with weathering appearance.

• Journal of The Geomorphological Association of Korea
• /
• v.23 no.3
• /
• pp.27-39
• /
• 2016

This study statistically investigates relationships between physical properties of rocks and topography by measuring and analyzing section, topographical and measured parameters of 58 bedrock outcrops at areas covered by gneiss, schist, granite, andesite, sandstone and limestone in the Korean Peninsula. Multiple linear regression analysis suggests that the joint spacing, joint continuity, weathering grade and maximum joint width of rocks among the measured parameters are related to the topographical parameters with statistical significances. Therefore, this study suggests that rock properties such as joint spacing, joint continuity, weathering grade and maximum joint width seem to greatly influence topography, although various factors can affect topographical parameters.

• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.451-462
• /
• 2017

Physical weathering caused by external forces and chemical weathering caused by the decomposition or alteration of constituent materials are the two factors that dominate the mechanical properties of rocks. In this study, a field investigation was undertaken to identify the physical and chemical weathering characteristics of the biotite granite and granitic weathered soils in Gyeongju, South Korea. Samples were collected according to their grade of weathering and subjected to modal analysis, XRD analysis, XRF analysis, physical property tests, particle size distribution tests, and slake durability tests. Modal and XRD analysis identified these rocks as biotite granite; secondary alteration minerals were not observed. Physical property tests and particle size distribution analyses indicate an average porosity of 41.28% and a sand content of > 90 wt.%. These values are somewhat higher than those of granites in general. The results of the slake durability test and XRF analyses show that the physical and chemical weathering indices of the samples vary with the degree of weathering.

• Conservation and Restoration of Cultural Heritage
• /
• v.1 no.1
• /
• pp.29-37
• /
• 2012

The West Stone Pagoda at Gameunsaji Temple Site constructed in the 7th century is mainly composed of dark grey dacitic tuff bearing small numerous dioritic xenoliths. These xenoliths resulted in small holes due to differential weathering process from the host rocks. Physical strength of the pagoda was decreased due to weathering and damage caused by petrological, biological and coastal environmental factors. The southeastern part of the pagoda was extremely deteriorated that the rock surface showed exfoliation, fracture, open cavity, granular decomposition of minerals and salt crystallization by seawater spray from the eastern coast. The stone blocks were intersected by numerous cracks and contaminated by subsequent material such as cement mortar and iron plates. Also, the pagoda was colonized by algae, fungi, lichen and bryophytes on the roof rock surface and the gaps between the blocks. As a result of ultrasonic test, the rock materials fell under Highly Weathered Grade (HW) or Completely Weathered Grade (CW). Thus, conservational intervention is essentially required to prevent further weakening of the rock materials.

• Geomechanics and Engineering
• /
• v.28 no.4
• /
• pp.375-384
• /
• 2022

The glacial tills and shales in Midwestern states of the USA often show strength degradation after construction. They are often in need of applying soil modification techniques to remediate their strength degradation with weathering process. This study investigated the weathering durability of these natural soils and biopolymer treated soils by comparing direct shear test results for wet-dry and wet-freeze-thaw-dry cycled specimens. The tests showed that untreated glacial tills maintained only 62% and 50% initial shear strength after eight wet-dry cycles and eight wet-freeze-thaw-dry cycles, respectively. These untreated soils could not withstand by themselves after 16 weathering cycles. The same soils treated with 1.5% (by dry weight) food-grade Xanthan gum maintained 140% and 88% initial shear strength of untreated soils after 16 weathering cycles for wet-dry cycles and wet-freeze-thaw-dry cycles, respectively. The same soils treated with 1.5% (by dry weight) Gellan gum maintained 82% and 60% initial shear strength of untreated ones after 16 weathering cycles, respectively. Similar results were obtained for crushed shales, manifesting that the biopolymerization method may be adopted as a new eco-friendly method to enhance the weathering durability of these problematic soils of glacial tills and shales.