• Geomechanics and Engineering
• /
• v.28 no.6
• /
• pp.625-636
• /
• 2022

The standard penetration test (SPT) obtaining the N value of the number of blows has been widely used in various subsurface conditions, including in weathered soil and rock on fresh bedrock, in geotechnical studies pertaining to the design of foundations and earth structures. This study examined the applicability of SPTs terminated conventionally after 50 blows for a penetration of less than 30 cm, particularly in weathered strata, at four sites in Korea. The N values obtained during practical SPTs are typically extrapolated linearly at 30 cm penetration, despite the possibility of a nonlinear relationship between blow counts and penetration. Such nonlinearity in weathered strata has been verified by performing special SPTs ensuring 30 cm penetration. To quantify the nonlinearity in dense strata, we conducted statistical regression analyses comparing the differences (DN) between the N values measured by the special SPTs and those extrapolated using the practical approach with the differences (DP) between the 30 cm penetration and the penetration during 50 blows. Bi-linear relationship models between DN and DP were subsequently proposed for determining the N values at 30 cm penetration in weathered strata. The N values reflecting nonlinearity could be determined from the linearly extrapolated N values by adding a modeled DN value.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.3
• /
• pp.63-69
• /
• 2009

The undisturbed specimens used in this research were sampled in the field by the sequential sampling method. In addition, four testing methods were applied to identify for the characteristics and classification of weathered strata. N-value by standard penetration test was obtained from in the field and then analyzed using normalization method. Other methods such as X-ray grain size distribution, X-ray fluorescence spectroscopy(XRF), and fall cone test were carried out in the lab. These analyzed results indicate that distribution of particle, composition of minerals are changed in accordance with the degree of weathering, unusual strata and depth. Consequently, the weathered strata can be extensively separated into two parts according to the test results and each part was shown different in the strata characteristics. It can be prospected that mechanical characteristics should be different, even though mechanical tests were not applied. Furthermore, these results not only make up for the error by one testing method but also contribute more effectively and economically to the design and the construction.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.431-438
• /
• 1999

Vertical congressive and horizontal pile load tests were performed to a instrumented large diameter (D : 1,000 mm) drilled shaft. A drilled shaft was penetrated into the weathered soil and weathered rock. PMT was done for evaluation of properties for these strata. It was expected to be difficult to get undisturbed samples of weathered soils and rocks. Thus. PMT was done at the several selected depths. In those strata, to prevent the test bore hole from collapsing, bentonite slurry was used for making the test bore hole. In this study. soil properties was evaluated by means of PMT results and estimating method (direct method, the Memard method) of vertical pile capacity and horizontal pile behaviors were summarized. Also, vertical and horizontal pile capacity were calculated using PMT and pile load test results.

• Advances in concrete construction
• /
• v.9 no.6
• /
• pp.537-545
• /
• 2020

In order to reduce the usage of cement slurry in grouting engineering and consume the tunnel excavation waste soil, a new geopolymeric grouting material (GGM) was prepared by combine completely weathered granite (CWG) and blast-furnace slag (BFS), which can be applied to in-situ grouting treatment of completely weathered granite strata. The results showed CWG could participate in the geopolymerization process, and GGM slurry has the characteristics of short setting time, high flowability, low viscosity, high stone rate and high mechanical strength, and a design method of grouting pressure based on viscosity evolution was proposed. By adjusted the content of completely weathered granite and alkali activator concentration, the setting time of GGM were ranged from 5 to 30 minutes, the flowability was more than 23.5 cm, the stone rate was higher than 90%, the compressive strength of 28 days were 7.8-16.9 MPa, the porosity were below 30%. This provides a novel grouting treatment and utilizing excavated soil of tunnels in the similar strata.

• The Journal of Engineering Geology
• /
• v.24 no.2
• /
• pp.273-281
• /
• 2014

In most current seismic design codes, design earthquake ground motions are defined by a reference spectrum, based on bedrock and site amplification factors that quantify the geotechnical dynamic conditions. Earthquake engineering bedrock is the fundamental geotechnical formation where the seismic waves are attenuated without amplification. To better define bedrock in an earthquake engineering context, shear wave velocity ($V_S$ ) data obtained from in-situ seismic tests were examined for several rock strata in Korea; these data were categorized by borehole drilling investigations. The $V_S$ values for most soft rock data in Korea are > 750 m/s, which is the threshold $V_S$ value for identifying engineering bedrock from a strong motion station. Conversely, VS values are < 750 m/s for 60% of $V_S$ data in weathered rock in Korea. Thus, the soft (or harder) rock strata below the weathered rock layer in Korea can be regarded as earthquake engineering bedrock.

• Geotechnical Engineering
• /
• v.9 no.1
• /
• pp.59-68
• /
• 1993

In deep excavations for creation of underground spaces, it would be difficult to predict earth pressure, especially multilayered ground including rock strata. The earth pressures and displacements on the retention walls are measured by load cell, strain gauge and inclinometer which were installed at struts or anchors at 4 deep excavation sites in Seoul area. In this paper, the measured earth pressure from the struts or anchors are compared with Peck's empirical values, and the coefficient of the earth pressures for each strata and horizontal wall displacement are investigated. The coefficient of earth pressure distribution, a(0.65zka), in the flexible and the rigid walls was about 74% and 88% of Peck's value respecitively. The measured earth pressure distributions for the 4 sites showed about 70%∼80% of Peck's empirical values and the average earth pressure coefficients based on the measured data were 0.3 for the felted layer, 0.23 for the weathered rock and 0.19 for the weak rock. The maximum w리1 displacements were found to be less 0.2% of excavation depth.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.4
• /
• pp.39-57
• /
• 2012

The volcanic edifice of Ulleungdo is largely divided into a shield volcano underwater and a tholoide above seawater. The geological features of the volcano above seawater are basically alkali volcanic rocks that are further divided into five geological strata: agglomerates and tuffs trachyte and phonolite trachytic pumice trachyandesite, and sedimentary layer. The topography of Ulleungdo consists of volcanic landform on the whole, and such volcanic landform is weathered and eroded into various weathering landform, stream landform, coastal landform, structural landform, etc. Major volcanic topography includes caldera basin, central cone, and columnar joint, whereas weathering topography features, tafoni, gnamma, tor, weathered cave, talus, etc. In major coastal topography are sea cliff, wave-cut platform, sea stack, sea arch, sea cave, shingle beach, coastal terrace, etc. For stream topography, its development is minimal except for waterfalls.

• Journal of Korean Society of Forest Science
• /
• v.111 no.2
• /
• pp.263-275
• /
• 2022

We conducted this study to provide essential data for implementing restoration measures on the physical properties of the geology, topography, and soil of the landcreep areas in Yangpyeong-gun, Gyeonggi-do. The strata of the survey area comprised topsoil, weathered soil, weathered rock, and soft rock layers. The landcreep area, caused by colluvial debris, was located in a convex topography shape distributed as bedrock with shales and incorporated with sandstone. According to the measurement of the displacement meter, the surveyed area has crept from 1.1 mm to 6.5 mm during the recurrent landcreep between 1 July and 27 August, 2020. The landcreep had progressed over two directions (S65° W, E45° S, and E70° S) which were similar to the groundwater flow direction (E82.5° S and S16.8° W). The average slope of the landcreep area occurred on a gentle slope (19.3°), lower than the average slope of the mountain area (25°) in Korea. The bulk density in the groundwater areas was lower than that in other surveyed areas.

• Journal of Korean Society of Forest Science
• /
• v.109 no.1
• /
• pp.62-71
• /
• 2020

With the aim of restoring slow-moving landslide areas, this study collected fundamental data from tree-ring analysis of curved trees in these areas. We collected both upper and lower stem disks to measure the azimuth angles of six trees with growth curvature caused by tension cracks. Additionally, we analyzed various factors in the slow moving landslide area. The geological strata and main constitutive rocks in the study area were anorthosite-formed in the Precambrian period; moreover, there were no intrusive rocks, other geological strata, geological folds, or faults. The talus with weathered rocks was distributed in the upper zone of the slow-moving landslide area. According to annual-ring analysis of curved trees and terrain analysis by satellite imagery, slow-moving landslide occurred from the top to the bottom end of the slope between 1999 and 2011. There was a significant relationship (P < 0.01) between the azimuth angle of cracks caused by the slow-moving landslide and the angle of the curved trees. These results suggest that the occurrence of slow-moving landslides could be confirmed through analysis of annual-rings of curved trees, underground water levels, and terrain (by satellite imagery).

• Journal of the Korean earth science society
• /
• v.33 no.1
• /
• pp.1-10
• /
• 2012

Analysis on high-resolution seismic and core data reveals that the sedimentary strata in Gyeonggi Bay consists of four sedimentary units (Unit I-IV, from top to bottom) formed during the late Quaternary period. Unit I is interpreted as sediments of tidal flat and channel-fill deposits, formed during the Holocene transgression. Unit II is divided into shallow-marine facies unit in offshore area and channelized fluvial to estuarine facies unit in nearshore sand ridge and tidal flat. Unit III is considered as tidal flat deposits with the uppermost severely weathered and oxydized layers. This unit is composed of shallow marine sedimentary successions formed during the MIS-5 highstand. The lowermost Unit IV rests on Mesozoic basement rocks, considered as the shallow marine and shelf deposits formed before the MIS-5 lowstand.