• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.9
• /
• pp.1060-1068
• /
• 2011

This study investigates the differences in the purchasing behavior of infant and children's wear with particular attention to the features of children and consumers. This study conducted a survey on female buyers of infant and children's wear living in Seoul and Gyeonggi Province. A total of 558 questionnaires were analyzed using a SPSS 18.0 statistic program with factor analysis, Cronbach's ${\alpha}$, cluster analysis, ANOVA, and Duncan test. The results are as follows. 1. Three types of groups by values were identified: mental-social achievement oriented group, social achievement oriented group, and pleasure value oriented group. 2. A significant difference was found in the physical criteria and aesthetic criteria. 3. A significant difference was found among the relation of groups in fancy, neat, and easy-active images. 4. The results showed for all groups that consumers of infant and children's wear prioritized soft pastels most.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.91-94
• /
• 2003

Ceramic femoral heads in the total hip replacement have been developed to reduce the polyethylene liner wear. Alumina and zirconia (3Y-TZP) are using in clinical application worldwide and there are many good test reports. However, alumina has a risk of catastrophic failure, and zirconia has the low temperature degradation in spite of enhanced fracture toughness. Recently, novel zirconia/alumina composite having low temperature degradation-free character and high fracture tough . was developed and it leads the lower wear 3f polyethylene than alumina and zirconia. In the present study, in order to optimise the microstructure of low temperature degradation (LTD)-free zirconia/alumina composite for the best wear resistance of polyethylene, various compositions of (LTD)-free zirconia/alumina composites were fabricated, and the sliding wear of UHMWPE against these novel composites were examined and compared with that against alumina and zirconia ceramics used for total hip joint heads.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.209-219
• /
• 2019

This study analyzed and compared wearer mobility for different types of clothing that also included the potential to develop firefighter station uniforms using range of motion (ROM) and electromyography (EMG). This study focused on a comparison of wearer mobility affected by different materials and shapes of the station uniforms worn under firefighter turnout gear. Japanese standard uniform (UNI), stretch-wear (ST), and compression-wear (CP) were used as station uniforms for the experiment. This study analyzed wearer movements and quantified ROM and EMG. In addition, the subjective evaluation of wearer mobility and comfort were assessed for comparisons. Nine healthy male students participated in the experiment. Wearer mobility was analyzed using ROM and EMG data obtained by measuring five motions; in addition, subjective evaluations were also obtained. As compared with the standard station uniform, ROM increased 6.8 % and 7.2 % due to stretch-wear and compression-wear. The benefits of wearing stretch material or compression material to improve muscle performance (such as reduced percent of maximum voluntary contraction) were not proven. Differences between materials and designs influenced subjective wearer comfort. In particular, the wearing of compression materials was shown best in terms of wearer comfort that may also allow greater wearer mobility.

• Journal of Welding and Joining
• /
• v.14 no.3
• /
• pp.66-74
• /
• 1996

In this study, friction and wear properties of flame sprayed specimens and hard Cr plating specimens were tested, and their properties were compared each other in dry and lubrication condition. Ni-Cr powder and steel powder were used as the spray powder and sprayed on the steel(S45C) substrate by flame sprayed method. Each wear surface was observed with SEM after friction and wear test. The friction coefficient of the as-forged steel specimens was the highest among surface treatment specimens, and the other specimens appeared in order as follows ; hard Cr-plating specimens, Ni-Cr powder sprayed specimens, steel powder sprayed specimens. Comparing the wear volumes in dry condition, as forged steel specimens appeared the greatest wear volume, and the other specimens appeared wear volume in order as follows ; Ni-Cr powder sprayed specimens, steel powder sprayed specimens, hard Cr plating specimens. In friction and wear test, the hard Cr plating specimens were worn by the abrasive phenomenon, involving the cracks. The wear volume of steel powder sprayed specimens was lower than that of Ni-Cr powder sprayed specimens. Comparing the tensile strength of both sprayed coating layers, the steel powder sprayed coating layer was better than Ni-Cr powder sprayed coating layer.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.5
• /
• pp.98-107
• /
• 1995

The in-process detection of drill wear and breakage is one of the most importnat technical problems in unmaned machining system. In this paper, the monitoring system is developed to monitor abnormal drilling states such as drill breakage, drill wear and unstable cutting using motor current. Drill breakage is detected by level monitoring. Tool wear is classified by fuzzy pattern recognition. The key feature for classification of tool wear is the estimated flank wear which is calculated by the proposed flank wear model. The characteristic of the model is not sensitive to the variation of cutting conditions but is sensitive to drill wear state. Unstable cutting states due to the unsmooth chip disposal and the overload are monitored by the variance/mean ratio of spindle motor current. Variance/mean ratio also includes the information about the prediction of drill wear and drill breakage. The evaluation experiments have shown that the developed system works very well.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.609-617
• /
• 2016

The purpose of this study is to investigate the wear index of toothbrush and related factors in the university students. A self-reported questionnaire was completed by 573 university students from March 16 to April 10, 2015. The questionnaire consisted of general characteristics of the subjects, wear index, and wear rate of the toothbrush. The wear index of 46.9 percent was above 0.400, and the average wear index was $0.403{\pm}0.20$. Overall, the wear index of the toothbrushes was high. 2. As a result of measuring the wear rate of the toothbrushes, the wear rate of 70.4 percent stood at 1 and 2. The average wear rate stood at $1.620{\pm}0.74$. Overall, the wear rate of the toothbrushes was high. 3. As for wear index and wear rate by gender, the wear index and wear rate of the toothbrushes used by the male students were larger than those of the toothbrushes used by the female students. The wear index and wear rate were significantly higher when the toothbrush replacement period was longer. Given the findings of the study, efficient oral health education on the right toothbrush management should be provided for college students to manage their toothbrushes properly.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.4
• /
• pp.701-715
• /
• 2016

This research compared 3 types of jacket pattern design methods for men's wear (age range 25-35) in textbooks. We are to develop research pattern with problem solving based on an analysis of three jacket patterns. The comparative analysis revealed that loose-silhouette slopers A and B scored high in functional evaluation and low in appearance evaluation. However, the tight-silhouette slim-line sloper C received high points in appearance evaluation, but low scores in functional evaluation. All three slopers were evaluated low in the back appearance. The design characteristics of the development jacket sloper were: front width, ($1/10chest{\times}2$)+0.8cm; side width, 1/10 chest+5.5cm; back width, ($1/10chest{\times}2$)+1.5cm; armscye depth, 1/8 chest+11cm; waist back length, 1/2 jacket length+5cm; and hip length, 1/2 (jacket length-waist length)+1cm. The proportions against jacket length were applied to waist length, hip length, and the position of chest/waist pockets. In addition, the back part with low appearance estimation was adjusted as comfortable with the back curve line. Appearance evaluation and 3D clothes modeling system (CLO) showed an overall improvement in the developed jacket sloper when compared to the original jacket slopers.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.313-323
• /
• 2003

The sliding wear behaviors of Zircaloy-4 nuclear fuel rod were investigated using two support springs with convex and concave shapes in room temperature air and water. The main focus is to compare the wear behavior of various test variables such as slip amplitude, environment, contact contours with different spring shape and a number of cycles. The results indicated that wear volume and maximum wear depth increased with slip amplitude in both air and water, but their trends tended to change according to the spring shapes and test environments. In air condition, the wear volume was controlled by wear debris behavior generated on worn surface. As a result, final wear volume and maximum wear depth decreased if a ratio of protruded wear volume to worn area $(D_p)$ would be saturated to specific value. This is because wear particle layer could accommodate large strain by accumulating and transforming wear particle layer. However, in water condition, metal-to metal contact was more dominant and wear volume was greatly affected by changed mechanical behavior between contact surfaces since wear debris should be generated after repeated plastic deformation and fracture. After wear test, worn surfaces were examined using optical microscope and SEM and details of wear mechanism were discussed using a ratio of wear volume to worn area $(D_e)$ at each test condition.

• Journal of Welding and Joining
• /
• v.31 no.4
• /
• pp.42-46
• /
• 2013

The contact tip for flux cored arc welding has important functions to transmit the welding current to the wire and to guide the wire to molten pool. A damaged contact tip causes a productivity reduction and a welding quality problem. In this study, the welding experiments for the wear resistance of contact tip regarding flux cored wire types were performed. With two fold type and a seamless type flux cored wires, the wear rates of contact tips were compared. In addition, the wear rate was checked according to the contact tip position.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.4
• /
• pp.9-15
• /
• 2017

In hot forming process, the dies in which excessive worn or crack occurs is reused after repair. Generally hot forming dies are recycled through a welding repair method. Welding repair methods are highly dependent on the skills of engineer. It causes process defects such as dimensional defects and structural defects. Recently, the metal 3D printing method has been applied to the repair of used dies. The aim of this study is to evaluate the wear characteristics of AISI H13 tool steel repaired by 3D printing method. Three kinds of wear specimens were fabricated by using 3D printing, welding, and initial material. A pin-on-disk wear test was carried out to evaluate the wear characteristics. From the result of wear test, the wear characteristics of 3D printing method was superior to that of the welded material, and was similar to that of the initial material.