• 인터넷정보학회논문지
• /
• 제23권5호
• /
• pp.111-126
• /
• 2022

과거 물리적 공간에서만 수행되던 작전이 사이버 공간을 포함하는 작전으로 바뀌면서 사이버 공격이 사이버 시스템을 활용한 무기체계에 어떤 영향을 미치는지 분석할 필요가 있다. 이를 위해 사이버와 연계한 물리적 무기체계의 영향을 분석하는 도구를 분석하는 것은 의미가 있을 것이다. 한국군은 물리 무기체계의 영향을 분석한 결과가 담긴 미군 JMEM을 확보해 운용하고 있다. JMEM은 재래식 무기체계에만 적용되어 사이버 무기체계의 영향을 분석하는 것은 불가능하다. 이를 위해 물리전의 MOE와 MOP를 기반으로 사이버 무기체계 효율성 분석을 위한 사이버지수를 산출하였다. 또한, 물리 작전에서 무기체계 효과 매뉴얼로 활용되고 있는 JMEM과 연계하여 사이버 공간에서의 전투 결과와 물리 작전의 효과를 비교 분석하여 임무 영향을 판단할 수 있는 프레임워크를 설계 및 시험하였다. 제안된 프레임워크를 입증하기 위해 국내외 군사 매뉴얼과 선행연구를 통해 작전 시나리오를 분석 및 설계하고 자산을 정의하고 실험을 수행하였다. 실험 결과 사이버 임무 효과 값의 감소가 클수록 물리적 작전에 미치는 영향이 커졌다. 다양한 작전에서 사이버 공격으로 인한 물리적 작전의 영향을 예측하는 데 사용할 수 있으며, 전장의 지휘관이 빠른 결정을 내리는 데 도움이 될 것이다.

• 센서학회지
• /
• 제22권1호
• /
• pp.18-27
• /
• 2013

Real-time monitoring is one of the prime necessities in a weapon flight test that is required for the efficient and timely collection of large amounts of high-rate sampled data acquired by an event-trigger. The wireless sensor network is a good candidate to resolve this requirement, especially considering the inhospitable environment of a weapon flight test. In this paper, we propose a priority based multi-channel MAC protocol with CSMA/CA over a single radio for a real-time monitoring of a weapon flight test. Multi-channel transmissions of nodes can improve the network performance in wireless sensor networks. Our proposed MAC protocol has two operation modes: Normal mode and Priority Mode. In the normal mode, the node exploits the normal CSMA/CA mechanism. In the priority mode, the node has one of three grades - Class A, B, and C. The node uses a different CSMA/CA mechanism according to its grade that is determined by a signal level. High grade nodes can exploit more channels and lower backoff exponents than low ones, which allow high grade nodes to obtain more transmission opportunities. In addition, it can guarantee successful transmission of important data generated by high grade nodes. Simulation results show that the proposed MAC exhibits excellent performance in an event-triggered real-time application.

• 한국군사과학기술학회지
• /
• 제17권6호
• /
• pp.718-724
• /
• 2014

Insensitive Munition(IM) reduces the explosive weakness of munitions, at the same time, maintains its performances in the moment of discharge, which improves safety of soldiers and minimizes unexpected accidents and casualties from being shot in case of transportation, storage and military operation. Development of IM has been focused as the global trend, which was required to satisfy the demand of army that is to minimize the loss of non-battle forces and to retain the competitiveness in export abroad. In this study, we categorize all the munitions used by ROK Army, then determine the priority of IM by deploying AHP(Analytic Hierarchy Process) method. In conclusion, we suggest the priority of IM which is suitable to the affairs of ROK Army.

• 한국국방경영분석학회지
• /
• 제1권1호
• /
• pp.111-129
• /
• 1975

U.S. Air Force Regulation 80-1 defines that a weapon system is composed of equipments, skills, and techniques, the composite of which ferns an instrument of combat. The complete weapon system includes all related facilities, equipments, materials, services, and personnels required for the operation of the system, so that the instrument of combat can be considered as a self-sufficient unit of striking power in its intended operational environment. Effectiveness of a weapon system can be expressed as a function of its liability, reliability and performance capability. Among these attributes which influence the weapon effectiveness, performance capability is considered to be the most critical factor for many weapon systems. In order to illustrate the application of the methodology of performance capability, a specific ease study on the effectiveness of Vulcan anti-air craft gun system is presented with special emphasis on hitting probability on moving targets, effects of artificial rounds dispersion, and several principles related to the deployment of the system. This thesis includes the thorough survey of the possibility of calculating the absolute value of hitting probability on moving targets, indicates that the effects of artificial rounds dispersion increase the value of probability only when the total number of rounds fired within fire range exceeds a certain critical number, and suggests that concentrated guns deployment is better than scattered deployment in order to obtain higher probability and lower average amount of rounds if it is assumed that the effects of counter-attack from enemy threats are not serious.

• 시스템엔지니어링학술지
• /
• 제12권2호
• /
• pp.1-8
• /
• 2016

The system engineering should be actively applied to successfully develop a complex and advanced weapon system, because the system engineering uses a multidisciplinary approach. Therefore, this study proposed a system engineering process for a successful weapon system development. According to the national standard policy, an IPT aspect system engineering standard must adapt the ISO/IEC/IEEE 15288. It also asks for tailoring with considering the IPT characteristics as a weapon system acquisition institution. The IPT aspect system engineering process to acquire a weapon system can be expressed with 3 process groups (Agreement, Technical Management, Technical) and 20 processes. There was a need for an institutional framework to hire retired experts from related organizations as consultants to apply the low-cost and high efficiency system engineering in the weapon system acquisition field.

• 경영과학
• /
• 제29권3호
• /
• pp.45-65
• /
• 2012

Test and evaluation of weapon system is an important task to evaluate the performance of overseas weapon system purchasing project. Especially, quantitative evaluation of performances is hardly completed in defense projects where multiple criteria are conflicted each other. In order to solve this problem, we apply Axiomatic Design (AD) and Inner Dependence AHP method. First, finite functional requirements (FRs) are categorized in hierarchy structure by selecting proper design parameters (DPs) to implement their corresponding FRs. If there are no ways to select DPs when design is coupled between FRs and DPs, then inner dependence is allowed to overcome the strict rule of independence in AHP. Second, the weights of DPs are calculated by applying both Inner Dependence AHP method for coupled design and normal AHP method for uncoupled or decoupled design. Finally, information axiom of AD is applied to the proposed weapon systems by calculating information contents for all parameters. Weapon system with minimum sum of information contents is considered as the best solution. The proposed method in this study should be used in multiple criteria decision making problems involving various conflicting criteria.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.5-11
• /
• 2006

This paper is launched to get an exact bore-sighting value in the process of assembling for a dual-barrel weapon. Image processing method with a CCD(Charged Coupled Device) camera is chosen for the error reduction of bore-sighting. The results of this method by using a CCD camera and the testing target method are described in this paper. After the performance of the dual-barrel weapon and that of the fire-control system in the dual barrel weapon system is confirmed, the bore-sighting which is a part of the process in the system assembly is accomplished. In this process, the position of the barrel is identified by using the testing target method that is an existing bore-sighting method. Then, the fixing line of the fire-control system is checked by a day-optical part. The precision of the bore-sighting is required within several mils, however the manual method using the naked eyes makes it worse. Therefore, a CCD camera is installed in the eyepieces. Next, we can get an image of the sighting and the center coordinate values of the laser-pointer from each barrel by image processing method. A required bore-sighting value is calculated from the eccentricity of the center coordinate. Finally, It can be applied to adopt this result in the assembling process of the dual-barrel weapon.

• 품질경영학회지
• /
• 제44권4호
• /
• pp.735-749
• /
• 2016

Purpose: This study is addressing the establishment of the knowledge information system supplying the quality management of weapon system. It is going to support the continuous quality management through the linkages and integration between the product structure and the quality information. Methods: The interrelated relationship of the product structure information and quality information of weapon system would be expressed explicitly by taking advantage of the ontology concept. The quality information of distributed systems would be integrated through the SOA(Service Oriented Architecture)-based Web services. After defining the inference rules, which could be utilized in the quality management, in the constructed knowledge information system, the quality information would be inferred through the queries. Results: By building the integrated quality information knowledge system through the ontology and SOA, the connectivity between the product structures and dispersed quality information was enhanced. The utility and applicability of this study were checked up through the inferences on the products and quality information by using the information built by the semantic relationship of facts. Conclusion: We established the knowledge and information system as a systematic approach to support the quality management of weapon system. This is not affected by the organizations and systems, and it seems that it could be utilized across the quality management as the efficient knowledge sharing architecture supporting the quality management of weapon systems in the aspect of the product integration.

• 품질경영학회지
• /
• 제43권4호
• /
• pp.499-510
• /
• 2015

Purpose: This paper treats the improvement of the quality and reliability of military weapon systems based on the maintenance data. Methods: The proposed method of the data integration and refinement are used to obtain the component reliability information and to find the frequently failed components based on the Pareto analysis. Based on the reliability information and the number of failed component frequencies, the target components of quality improvement are determined and improved by multiple methods such as engineering changes, special meetings, additional training and revising maintenance manuals. Results: Based on the proposed process, we find some components which need to be improved in order to enhance the quality and reliability. Conclusion: A process is developed for improving the quality and reliability of weapon systems. This process will be adopted by various weapon systems to enhance the quality and reliability, as well as reduce military spending.

• 품질경영학회지
• /
• 제41권3호
• /
• pp.395-404
• /
• 2013

Purpose: Technology readiness assessment(TRA) used as a standard readiness assessment tool in the acquisition program of weapon system has some limitations in the comprehensive understanding of the complex system. Therefore, this research is intended to suggest a holistic maturity assessment method for the acquisition of high quality weapon system. Methods: Technology readiness level(TRL), manufacturing readiness level(MRL), integration readiness level(IRL) and system readiness level(SRL) developed to assess system maturities in the various aspects are compared and analyzed to draw an improvement avenue for the current readiness assessment method. Results: TRL, MRL, IRL and SRL have large differences in their maturity targets during the acquisition life cycle: technological performance, manufacturing capability, interface between components and total system, respectively. They complement one another's shortcomings Conclusion: To achieve a successful acquisition of high quality weapon system, multi-dimensional readiness assessment is required. Therefore, comprehensive readiness assessment using TRL, MRL, IRL and SRL will contribute to the acquisition of high quality weapon system through the accurate maturity information of overall system.