• Korean Journal of Logic
• /
• v.12 no.2
• /
• pp.115-139
• /
• 2009

This paper investigates an extension of the uninorm (based) logic UL, which is obtained by adding (t-weakening, $W_t$) (($\phi$ & $\psi$) ${\wedge}$ t) $\rightarrow$ $\phi$ to UL introduced by Metcalfe and Montagna in [8]. First, the t-weakening uninorm logic $UL_{Wt}$ (the UL with $W_t$) is introduced. The algebraic structures corresponding to $UL_{Wt}$ is then defined, and its algebraic completeness is established. Next standard completeness (i.e. completeness on the real unit interval [0, 1]) is established for this logic by using Jenei and Montagna-style approach for proving standard completeness in [3, 6].

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.254-260
• /
• 2013

This paper deals with electromagnetic characteristics of IPMSM (Interior Permanent Magnet Synchronous motor) caused by field weakening current control. In order to extend operation speed, field weakening current control is generally used in IPMSM operation. During field weakening, distorted linkage fluxes are resulted by saturation of core material. Therefore, distorted input voltage waveform is required for sinusoidal current input. As the current vector angle increases for field weakening, distortion of linkage flux and back-emf becomes significant. This situation is analyzed by 2-dimensional finite element analysis and verified by experiment. With the results, it is concluded that motor parameters, such as linkage flux by permanent magnet, phase resistance, d-q axis inductance, are insufficient for estimating required voltage for given speed especially in field weakening and additional considerations for increased harmonics of voltage are required.

• Explosives and Blasting
• /
• v.27 no.2
• /
• pp.12-18
• /
• 2009

Recently, several cases of destruction of old cylindrical silos by explosive demolition method have been reported. This study deals with the subject concerning the pre-weakening of a cylindrical concrete silo for the application of overturning explosive demolition method. In the past, the pre-weakening operation of structure in explosive demolition has been done by use of some empirical methods. These empirical approaches, however, have possibilities of unexpected accidents. In order to provide a guideline for the pre-weakening of cylindrical silos and similar structures, this paper shows the result of a case study, in which the instability of a silo due to pre-weakening is investigated by a numerical structural analysis before actually conducting pre-weakening and demolition operations.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.3
• /
• pp.279-284
• /
• 2016

In this study, facial hair weakening ability of urea and anti-oxidants for shaving was investigated. The hair weakening ability and cross-section increase of hair depends on concentration of urea. The results showed that urea affects swelling of hair and this is related to the hair weakening ability. Anti-oxidants showed outstanding weakening ability despite of their low concentrations by breaking disulfide bond in facial hair. To evaluate the suitability of urea and anti-oxidants for facial cosmetic products, in vitro safety tests were proceeded. The results showed that urea and glutathione were safe for face. As a result, urea and glutathione were safe and outstanding as hair weakening agent for cosmetic shaving products.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.5
• /
• pp.437-442
• /
• 2013

For open-end permanent magnet synchronous machine(PMSM) with dual inverter system, where one inverter is connected to the source and the other is flying, the dc link voltage of the flying inverter can be boosted through the machine. For this reason, when compared with single inverter drive system, higher voltage can be applied to PMSM, and higher torque can be generated in the flux weakening region. In this case, however, active and reactive powers are separately supplied by each inverter to maintain the dc link voltage of flying inverter. Therefore, the required flux weakening control is different from the conventional method for a single inverter drive system. This paper proposes the novel flux weakening control method which maximizes the active voltage component in a dual inverter PMSM drive system. The proposed method was demonstrated and verified through experimental results.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.5-9
• /
• 1990

A permanent magnet synchronous motor(PMSM) differs from an ordinary synchronous motor in that the former has no field winding and the field flux can not be controlled by field current. A field-weakening control of PMSM utilizing the demagnetization due to d-axis armature reaction is equivalent to reducing the field current. In this paper, the armature resistance is considered for the optimum field-weakening control.

• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.1-4
• /
• 1996

The purpose of this treatise is to estimate speed of an induction motor and realize a robust speed control system with estimated speed in field-weakening region. A speed estimation is based on Model Reference Adaptive System(MRAS) technique and two flux estimator are designed to be robust against parameter variation. The MRAS-based overall control scheme has been implemented on 7.5kW Spindle induction motor control system. And it is verified that the proposed control scheme is very stable and robust in field-weakening region.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2751-2753
• /
• 1999

This paper presents the field weakening base speed considering stator resistance effect. It uses the algorithm of estimating rotor and stator resistance to compensate resistance variation. And by using estimated stator resistnace the field weakening base speed is determinded. Simulation results demonstating the effectiveness of this method.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.405-408
• /
• 2001

This paper investigates the problem of the speed estimation of conventional speed sensorless stator flux-oriented induction machine drive in the field weakening region and proposes a new speed estimation scheme to estimate speed exactly in transients in the field weakening region. The error included in the estimated rotor speed is removed by not a low pass filter but Kalman filter.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.136-144
• /
• 2012

In this paper, the different techniques for the field weakening, also known as constant power speed range (CPSR) operation, for permanent magnet synchronous motor (PMSM) will be introduced and analysed. Field weakening of PMSM, can be done using either vector control (VC) or conventional phase in advance (CPA). Implementation of these techniques depending on some features and constrains. Most of these features and constrains came from the motor parameters. One of these constrains is the motor inductance which determining whether the motor can be driven in the CPSR or not. A new approach for the field weakening will be discussed and to be verified to overcome this constrain. The new approach will be verified through both techniques VC and CPA.