• 제목/요약/키워드: weakening

검색결과 751건 처리시간 0.024초

Numerical cyclic behavior of T-RBS: A new steel moment connection

  • Ataollahi, Saeed;Banan, Mohammad-Reza;Banan, Mahmoud-Reza
    • Steel and Composite Structures
    • /
    • 제21권6호
    • /
    • pp.1251-1264
    • /
    • 2016
  • After observing relatively poor performance of bolted web-welded flange beam-to-column connections during 1994 Northridge earthquake, various types of connections based on two concepts of: (i) strengthening the connection; and (ii) weakening the beam ends were proposed. Among these modified or newly proposed connections, bolted T-stub connection follows the concept of strengthening. One of the connections with the idea of weakening the beam ends is reduced beam section (RBS). In this paper, finite element simulation is used to study the cyclic behavior of a new proposed connection developed by using a combination of both mentioned concepts. Investigated connections are exterior beam-to-column connections designed to comply with AISC provisions. The results show that moment capacity and dissipated energy of the new proposed connection is almost the same as those computed for a T-stub connection and higher than corresponding values for an RBS connection.

Change of pore structure and uniaxial compressive strength of sandstone under electrochemical coupling

  • Chai, Zhaoyun;Bai, Jinbo;Sun, Yaohui
    • Geomechanics and Engineering
    • /
    • 제17권2호
    • /
    • pp.157-164
    • /
    • 2019
  • The effect of electrochemical modification of the physical and mechanical properties of sandstone from Paleozoic coal measure strata was investigated by means of liquid nitrogen physical adsorption, X-ray diffraction and uniaxial compressive strength (UCS) tests using purified water, 1 mol/L NaCl, 1 mol/L $CaCl_2$ and 1 mol/L $AlCl_3$ aqueous solution as electrolytes. Electrochemical corrosion of electrodes and wire leads occurred mainly in the anodic zone. After electrochemical modification, pore morphology showed little change in distribution, decrease in total pore specific surface area and volume, and increased average pore diameter. The total pore specific surface area in the anodic zone was greater than in the cathodic zone, but total pore volume was less. Mineralogical composition was unchanged by the modification. Changes in UCS were caused by a number of factors, including corrosion, weakening by aqueous solutions, and electrochemical cementation, and electrochemical cementation stronger than corrosion and weakening by aqueous solutions.

제품태도에 대한 회복노력의 차별적 효과 (Differential Effects of Recovery Efforts on Products Attitudes)

  • 김천길;최정미
    • 마케팅과학연구
    • /
    • 제18권1호
    • /
    • pp.33-58
    • /
    • 2008
  • 본 연구는 서비스실패가 아니라 제품실패 이후, 회복노력의 효과를 실패심각성에 따라 확인하는 것이다. 회복노력은 보상노력, 장점노력 및 단점노력으로 구분되었다. 보상노력은 실패상황을 직접적으로 되돌리려는 의도로 구체적인 보상을 제공하는 방안으로, 장점노력은 제품실패를 초래하는 이유가 특정한 장점을 추구하는 과정에서 불가피하게 발생할 수 있는 문제임을 언급하는 것과 같이 추가적인 상대적 장점을 설명하는 방식으로, 그리고 단점노력은 자사제품이 서비스실패를 초래할 수 있는 문제점을 지니고 있는 반면에 경쟁제품은 또 다른 측면의 단점을 지니고 있다는 점을 부각시켜 소비자의 자사제품에 대한 부정적 태도를 회복시키려고 방안이라고 개념화되었다. 그러한 회복노력들이 실질적으로 효과가 있다고 결론을 내리기 위해서, 회복노력이 제공되지 않는 상황과 비교하여 소비자의 태도나 의향이 우호적인지 검토된다. 가설검증을 위해 화장품산업에서 소비자들을 대상으로 가상적인 시나리오를 이용한 실험을 실시하였다. 연구 결과, 전반적으로 회복노력들은 효과적인 전략임이 확인되었고, 보상노력은 장점노력이나 단점 노력보다 효과적이었다. 특히 심각성이 높은 실패조건에서 단점노력은 장점노력보다 긍정적인 제품태도를 유도하였다. 심각성이 낮은 실패조건에서 장점노력과 장점노력의 효과는 기대할 수 없었다.

  • PDF

정밀 토크 제어를 위한 SMPM 전동기의 약자속 영역에서 자기 돌극성 추정 (Magnetic Saliency Estimation of SMPM Motor for Precise Torque Control using State-Filter in Flux-Weakening Operation)

  • 장주영;최찬희;석줄기
    • 조명전기설비학회논문지
    • /
    • 제23권8호
    • /
    • pp.67-73
    • /
    • 2009
  • 본 논문에서는 고속에서 토크 제어 시 표면 부착형 전동기에 발생되는 자기 포화 현상으로 인한 돌극 현상을 분석하고 해석한다. 인덕턴스 추정을 위한 State-Filter를 고안하여 d축과 q축의 임피던스를 추정하며 추정된 d축과 q축의 임피던스 차이로 자기 포화로 인한 돌극성이 존재한다는 것을 증명한다. 또한, 약자속 영역에서 토크 제어를 수행함에 있어서 돌극성 효과를 고려한 전류제어 방법을 제안한다. 릴럭턴스 토크를 가지는 전동기 모델을 기반으로 하여 제안된 제어기는 전류 제한원에서 토크 곡선을 따라 d축과 q축의 전류를 조절한다. 제안된 전류제어의 타당성을 증명하기 위해 600[W] 상용 SMPM 전동기를 대상으로 실험을 수행하였다.

CMIP5 모델에서 모의되는 지구온난화에 따른 21세기 말 저위도 대기 순환의 변화 (Changes in the Low Latitude Atmospheric Circulation at the End of the 21st Century Simulated by CMIP5 Models under Global Warming)

  • 정유림;최다희;백희정;조천호
    • 대기
    • /
    • 제23권4호
    • /
    • pp.377-387
    • /
    • 2013
  • Projections of changes in the low latitude atmospheric circulation under global warming are investigated using the results of the CMIP5 ensemble mean. For this purpose, 30-yr periods for the present day (1971~2000) and the end of the $21^{st}$ century (2071~2100) according to the RCP emission scenarios are compared. The wintertime subtropical jet is projected to strengthen on the upper side of the jet due to increase in meridional temperature gradient induced by warming in the tropical upper-troposphere and cooling in the stratosphere except for the RCP2.6. It is also found that a strengthening of the upper side of the wintertime subtropical jet in the RCP2.6 due to tropical upper-tropospheric warmings. Model-based projection shows a weakening of the mean intensity of the Hadley cell, an upward shift of cell, and poleward shift of the Hadley circulation for the winter cell in both hemispheres. A weakening of the Walker circulation, which is one of the most robust atmospheric responses to global warming, is also projected. These results are consistent with findings in the previous studies based on CMIP3 data sets. A weakening of the Walker circulation is accompanied with decrease (increase) in precipitation over the Indo-Pacific warm pool region (the equatorial central and east Pacific). In addition, model simulation shows a decrease in precipitation over subtropical regions where the descending branch of the winter Hadley cell in both hemispheres is strengthened.

전자상거래가 경제에 미치는 효과 - 물류 정보화를 중심으로 - (The effect of electronic commerce on the economy - logistics industry perspective -)

  • 김범환
    • 기술경영경제학회:학술대회논문집
    • /
    • 기술경영경제학회 1999년도 제16회 동계학술발표회 논문집
    • /
    • pp.281-295
    • /
    • 1999
  • This paper analyses the effects of the increase of logistics outsourcing on the economy which are largely classified into three parts. The firm level and industry level are two among them which will be summarized below. The another is consumers level. On the fm level, the logistics outsourcing of a manufacturing firm not only helps to increase the efficiency of itself and but also confront the competitive environments by weakening the entry barriers, i.e., the emergence of contestable market. The reasons why the efficiency of the firm enhances are also largely divided into two parts. One is due to the reduction of inventory cost by replacing it by the information cost resulting from internet use. The other is owing to reducing the life cycle of production process by the emergence of virtual enterprises which are located in one point in De process of supply chain management. The weakening of entry barriers is directly affected by the drastic increase of internet users in twofold reasons: one is based on the restricted competitive characteristics due to the long-term transaction relationship between logistics providers and the companies who offer logistics services and the other, due to the weakening of the restriction of space and time. The effect of industry level is due to the transition of traditional to virtual vertical integration system The firms corresponding to a connection point in the process of supply chain management would try to realize both the scale of economy and the scope of economy for strengthening the competitiveness. We indicated above the emergence of contestable market however, it is a short-term phenomenon and result in the oligopoly market due to the entry barriers in the long-run sense.

  • PDF

Seismic protection of smart base-isolated structures using negative stiffness device and regulated damping

  • Bahar, Arash;Salavati-Khoshghalb, Mohsen;Ejabati, Seyed Mehdi
    • Smart Structures and Systems
    • /
    • 제21권3호
    • /
    • pp.359-371
    • /
    • 2018
  • Strong seismic events commonly cause large drift and deformation, and functionality failures in the superstructures. One way to prevent functionality failures is to design structures which are ductile and flexible through yielding when subjected to strong ground excitations. By developing forces that assist motion as "negative stiffness forces", yielding can be achieved. In this paper, we adopt the weakening and damping method to achieve a new approach to reduce all of the structural responses by further adjusting damping phase. A semi-active control system is adopted to perform the experiments. In this adaptation, negative stiffness forces through certain devices are used in weakening phase to reduce structural strength. Magneto-rheological (MR) dampers are then added to preserve stability of the structure. To adjust the voltage in MR dampers, an inverse model is employed in the control system to command MR dampers and generate the desired control forces, where a velocity control algorithm produces initial required control force. An extensive numerical study is conducted to evaluate proposed methodology by using the smart base-isolated benchmark building. Totally, nine control systems are examined to study proposed strategy. Based on the numerical results of seven earthquakes, the use of proposed strategy not only reduces base displacements, base accelerations and base shear but also leads to reduction of accelerations and inter story drifts of the superstructure. Numerical results shows that the usage of inverse model produces the desired regulated damping, thus improving the stability of the structure.