• Journal of Ocean Engineering and Technology
• /
• v.18 no.4 s.59
• /
• pp.23-32
• /
• 2004

Specially shaped concrete blocks are used for the armor layer of rubble structure for breakers, seawalls, or other shore protection work. In this study, the hydraulic characteristics of the Modified-Tribar(MTB), which addresses the shortcomings of the Arch-Tribar, and the most widely used Tetrapod(TTP) in Korea are examined through hydraulic model tests. The MTB are much more stable than the TTP, as shown through the stability model tests under non-breaking and non-overtopping condition. The value of the stability coefficient(KD) was obtained at around 30. The model tests show that the TTP random two layers and MTB uniform 1.5 layers have similar effects, but the MTB one layer shows slightly low effects in dissipating wave energy. The TTP random two layer model is the most effective in reducing wave overtopping rate, under overtopping condition, while the MTB uniform one layer and the MTB uniform 1.5 layer models follow respectively.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.6
• /
• pp.257-264
• /
• 2021

This study established a numerical model capable of calculating the wave overtopping rate of coastal structures by nonlinear irregular waves using the FUNWAVE-TVD model, a fully nonlinear Boussinesq equation model. Here, a numerical model was established by coding the mean value approach equations of EurOtop (2018) and empirical formula by Goda (2009), and adding them as subroutines of the FUNWAVE-TVD model. The verification of the model was performed by numerically calculating the wave overtopping rate of nonlinear irregular waves on vertical wall structures and comparing them with the experimental results presented in EurOtop (2018). As a result of the verification, the numerical calculation result according to the EurOtop equation of this model was very well matched with the experimental result in all relative freeboard (R_c/H_mo) range under non-impulsive wave conditions, and the numerical calculation result of empirical formula was evaluated slightly smaller than the experimental result in R_c/H_mo < 0.8 and slightly larger than the experimental result in R_c/H_mo > 0.8. The results of this model were well represented in both the exponential curve and the power curve under impulsive wave conditions. Therefore, it was confirmed that this numerical model can simulate the wave overtopping rate caused by nonlinear irregular waves in an vertical wall structure.

• Ocean Systems Engineering
• /
• v.10 no.4
• /
• pp.359-371
• /
• 2020

The performance of a multi-level overtopping wave energy converter (OWEC) has been numerically and experimentally investigated in a two-dimensional wave tank in order to study the effects of opening width of additional reservoirs. The device is a fixed OWEC consisting of an inclined ramp together with several reservoirs at different levels. A particle-based numerical simulation utilizing the Lattice Boltzmann Method (LBM) is used to simulate the flow behavior around the OWEC. Additionally, an experimental model is also built and tested in a small wave flume in order to validate the numerical results. A comparison in energy captured performance between single-level and multi-level devices has been proposed using the hydraulic efficiency. The enhancement of power capture performance is accomplished by increasing an overtopping flow rate captured by the extra reservoirs. However, a noticeably large opening of the extra reservoirs can result in a reduction in the power efficiency. The overtopping flow behavior into the reservoirs is also presented and discussed. Moreover, the results of hydrodynamic performance are compared with a similar study, of which a similar tendency is achieved. Nevertheless, the LBM simulations consume less computational time in both pre-processing and calculating phases.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.325-332
• /
• 2021

As commercial and residential areas are actively developed around the coastal area with excellent scenery, installing coastal structures such as seawalls and breakwaters is continuously increasing to secure safe coastal regions. Additionally, the increase in the intensity of natural disasters due to climate change may cause higher incident waves than in the past, which may further aggravate the damage caused by wave overtopping. In this study, compared to the existing vertical seawall, we investigated the effect of wave overtopping reduction of a recurved seawall, which actively reflects the incoming waves, through the hydraulic model test. As a result of the hydraulic model experiment, it was confirmed that there was an effect of up to 92.4% of wave overtopping reduction in average compared to the vertical seawall and structures covered with armor blocks.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.113-128
• /
• 1990

In recent years, various types of coastal protection scheme have been studied around the coastal region. Among them, so-called zonal protection systems are being watched with interest from various points of view. In this paper, wave overtopping rate from overflowing the vertical seawall is investigated by conducting two dimensional model on the horizontal bed experiment. Hereafter this system is referred to as a artificial reef system. One is the foundation to control wave height near the surfzone and the other is function to prevent coastal disaster by suppressing net overtopping rate. The main results obtained in this study are summarized as follows. 1) Wave attenuation taken place on the artificial reef can be predicted numerically by using energy dispersion model due to wave breaking proposed by Battjes. 2) To evaluate the wave overtopping rate from a vertical seadike on various coastal constructions by weir model, a numerical procedure for prediction of overtopping is confirmed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.4
• /
• pp.383-389
• /
• 2006

In three dimensional wave field, a direct numerical simulation model, which is able to handle free-fall and slope-fall of a waterdrop due to overtopping, is proposed to evaluate the overtopping rate on the coastal structures like an absorbing revetment. A comparison between the numerical model and existing experimental results for overtopping rate was made to validate the proposed numerical model's accuracy, and showed fairly good agreement between them. It is confirmed in numerical and hydraulic(existing) model test that the overtopping quantity on a absorbing revetment becomes larger with an increase in Ursell number. Also, the overtopping rate estimated by 3-D numerical model is compared with it obtained by 2-D numerical model.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.168-174
• /
• 2022

In a wave power generation system, the overtopping system is known as an overtopping wave energy converter (OWEC). The performance of an OWEC is affected by wave characteristics such as height and period because its power generation system is sensitive to those characteristics; these, as well as wave direction, depend on the sea. As these characteristics vary, it is hard for the OWEC to produce power in a stable manner. Therefore, it is necessary to find an appropriate shape for an OWEC, according to the characteristics of the sea it is in. This research verified the effect of the design of the OWEC ramp on the hydraulic efficiency using the smoothed particle hydrodynamics (SPH) particle method. A total of 10 models were designed and used in simulations performed by selecting the design parameters of the ramp and changing the attack angle based on those parameters. The hydraulic efficiency was calculated based on the rate of discharged water obtained from the analysis result. The effect of each variable on the overtopping performance according to the shape of the ramp was then confirmed. In this study, we present suggestions for determining the direction for an appropriately shaped OWEC ramp, based on a specific sea area.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.2 s.63
• /
• pp.34-39
• /
• 2005

All of the design criterion are not only formulated by an internal study, concerning the design of maritime structures, but also by the guarantee that internal design technology is essential, at least according to theoretical and experimental studies. Furthermore, the basic data, which is necessary for the development of a more stable design of breakwater structures, should be ensured, according to current research and analysis of damage created by water waves. According to the necessity to solve the problems that occur in the design and construction of ocean structures, until now, it is recognized that the hydraulic experiments are important. This paper provides the design of structures to decrease the energy created by waves. Suggestions to make contributions to the development of ocean/fisheries technology are also discussed. It is better to use S-type coastal structures/breakwaters than to use uniform type breakwaters, concerning stability, reflection, and overtopping.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.3
• /
• pp.21-30
• /
• 2010

This study presents a numerical simulation of sea water-exchange as a preliminary accessing tool of water quality in the protected shore behind a overtopped breakwater. The overtopped breakwater is taken into account for a safe swimming and beach protection. The overtopping rate is calculated by empirical models and the consequent currents, known as wave-induced currents, are calculated under the conditions of H.W.O.S.T and L.W.O.S.T. The rate of sea water exchange is used to evaluate the characteristics of sea water exchange and calculated through the simulation processes such as advective discharging through the outlets and random-walking diffusion of particles released within a basin. The numerical results show that the overtopped waves sufficiently improve the water exchange without healthless stagnation of contaminated mass and the consequent currents are not too strong for swimming.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.743-748
• /
• 1997

In this paper, a new type of precast perforated concrete block is presented to be used in the construction of a step seawall. The overtopping rate of the perforated step seawall is lower than that of the traditional non-perforated step seawall. In construction stage, the cost of total construction of the perforated block is cheaper than that of traditional block. The new type of perforated block may be used as an alternative for shore protection facility.