• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.4
• /
• pp.257-263
• /
• 2019

Multilayered structures include lamination by relatively thick plies and thin interlayers. For efficient peridynamic analysis of dynamic fracturing multilayered structures, the interlayer is modeled using ghost peridynamic particles while the ply is formulated via real peridynamics. With the nonlocal ghost interlayer, one may keep the discretization resolution low for the ply. In this study, the characteristics of dynamic wave propagation through the nonlocal ghost interlayer in peridynamic analysis are investigated. It is observed that the interlayer not only binds adjacent plies, but also significantly influences energy transfer between plies, and thereby their deformation and motion. In addition, near a surface or boundary, peridynamic particles do not have a full nonlocal neighborhoods. This causes the effective material properties near the surface to be different from those in the bulk. Surface correction based on neighborhood volumes is employed. The impact of surface correction on wave propagation in multilayered structures is investigated.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.6
• /
• pp.698-705
• /
• 2008

When electromagnetic waves propagate through atmosphere, waves are affected by various factors. Atmosphere normally consists of different molecular species, water vapours, rain, fog, snow and small suspended particles called aerosols. The distributions of atmosphere molecules, water vapours, rain rate, snowfall and aerosol are dependent on geometrical regions or environment. In order to predict propagation characteristics in atmospheric environment, statistical analysis of the relevant parameters such as temperature, humidity, atmospheric pressure, wind speed, areosol and rainfall is crucial. In this paper, we performed a long-term statistical analysis for the atmospheric parameters in domestic environments and analyzed the propagation characteristics through atmosphere based on that.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.164-170
• /
• 2006

Millimeter waves can be used for high resolution ranging and imaging. As the necessity of high-speed multimedia communication increases, millimeter wave systems are being developed since they are useful for wide band communication considering the shortage of available spectrum bands. However, it is necessary to analyze the characteristics of millimeter propagation in the atmosphere to assess the performance of millimeter wave systems. MCF and intensity fluctuations describe atmospheric effects on millimeter wave propagation. Using the quasi-optical method, a method is investigated to obtain MCF from the intensity distribution of focal plane. Also, a practical method is proposed to compute MCF from the flux measurement in the antenna focal plane.

• Geomechanics and Engineering
• /
• v.18 no.6
• /
• pp.605-614
• /
• 2019

The present paper seeks to investigate propagation and reflection of waves at free surfaces of homogeneous, anisotropic and rotating micropolar fibre-reinforced medium with voids. It has been observed that, in particular when P-wave is incident on the free surface, there exist four coupled reflected plane waves traveling in the medium; quasi-longitudinal displacement (qLD) wave, quasi-transverse displacement (qTD) wave, quasi-transverse microrotational wave and a wave due to voids. Normal mode Analysis usually called harmonic solution method is adopted in concomitant with Snell's laws and appropriate boundary conditions in determination of solution to the micropolar fibre reinforced modelled problem. Amplitude ratios which correspond to reflected waves in vertical and horizontal components are presented analytically. Also, the Reflection Coefficients are presented using numerical simulated results in graphical form for a particular chosen material by the help of Mathematica software. We observed that the micropolar fibre-reinforced, voids and rotational parameters have various degrees of effects to the modulation, propagation and reflection of waves in the medium. The study would have impact to micropolar fibre-reinforecd rotational-acoustic machination fields and future works about behavior of seismic waves.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2632-2634
• /
• 2011

In the Structural Health Monitoring field, the piezoelectric elements are bonded the surface of the structures for generating the guided wave. For this reason, the structures become two-layer beam. It is very important to know precisely the dynamic characteristic of structures and also predict precisely the wave propagation in structures. Because wave propagation is very useful to analysis the dynamic characteristic of structures. In this paper, the governing equations of motion are derived from Hamilton's principle by applying the Timoshenko beam theory and Mindlin-Herrmann rod theory at the first. and then the wave propagations in a composite beams with a surface-bonded piezoelectric are examined.

• Computers and Concrete
• /
• v.32 no.1
• /
• pp.61-74
• /
• 2023

This article investigates the wave propagation analysis of the imperfect functionally graded (FG) sandwich plates based on a novel simple four-variable integral quasi-3D higher-order shear deformation theory (HSDT). The thickness stretching effect is considered in the transverse displacement component. The presented formulation ensures a parabolic variation of the transverse shear stresses with zero-stresses at the top and the bottom surfaces without requiring any shear correction factors. The studied sandwich plates can be used in several sectors as areas of aircraft, construction, naval/marine, aerospace and wind energy systems, the sandwich structure is composed from three layers (two FG face sheets and isotropic core). The material properties in the FG faces sheet are computed according to a modified power law function with considering the porosity which may appear during the manufacturing process in the form of micro-voids in the layer body. The Hamilton principle is utilized to determine the four governing differential equations for wave propagation in FG plates which is reduced in terms of computation time and cost compared to the other conventional quasi-3D models. An eigenvalue equation is formulated for the analytical solution using a generalized displacements' solution form for wave propagation. The effects of porosity, temperature, moisture concentration, core thickness, and the material exponent on the plates' dispersion relations are examined by considering the thickness stretching influence.

• International Journal of Ocean System Engineering
• /
• v.4 no.1
• /
• pp.43-48
• /
• 2014

Varying bathymetry significantly affects on the wave propagation and motion response of floating body. Coupled-mode wave theory is adopted to describe the incident wave properly in varying region. The results of waves and motion response are compared to those from numerical wave tank, and the agreement is favorable. The sloped bottom is modeled and its effect on the floating body is discussed.

• Steel and Composite Structures
• /
• v.22 no.2
• /
• pp.277-299
• /
• 2016

In this paper, free vibration, forced vibration, resonance and stress wave propagation behavior in nanocomposite plates reinforced by wavy carbon nanotube (CNT) are studied by a mesh-free method based on first order shear deformation theory (FSDT). The plates are resting on Winkler-Pasternak elastic foundation and subjected to periodic or impact loading. The distributions of CNTs are considered functionally graded (FG) or uniform along the thickness and their mechanical properties are estimated by an extended rule of mixture. In the mesh-free analysis, moving least squares (MLS) shape functions are used for approximation of displacement field in the weak form of motion equation and the transformation method is used for imposition of essential boundary conditions. Effects of CNT distribution, volume fraction, aspect ratio and waviness, and also effects of elastic foundation coefficients, plate thickness and time depended loading are examined on the vibrational and stresses wave propagation responses of the nanocomposite plates reinforced by wavy CNT.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1653-1658
• /
• 2008

In this paper, it is analyzed propagation distribution characteristics of radio wave, which is radiated on all sides from Access Point device for estimating scheme of wireless AP without GPS receiver environment. To tracking AP device is traced from wireless terminals and wireless terminal is traced from fixed AP devices, above all it is important to analysis the characteristics of receiving power in according to distance. Therefore in this paper, radio propagation characteristics of 2.4GHz wave is analyzed effect extent and quality in according to distance in doors and out doors, and utilized to location estimation.

• Steel and Composite Structures
• /
• v.27 no.1
• /
• pp.109-122
• /
• 2018

In This work an analysis of the propagation of waves of functionally graduated plates is presented by using a high order hyperbolic (HSDT) shear deformation theory. This theory has only four variables, which is less than the theory of first order shear deformation (FSDT). Therefore, a shear correction coefficient is not required. Unlike other conventional shear deformation theories, the present work includes a new field of displacement which introduces indeterminate integral variables. The properties of materials are supposed classified in the direction of the thickness according to two simple distributions of a power law in terms of volume fractions of constituents. The governing equations of the wave propagation in the functionally graded plate are derived by employing the Hamilton's principle. The analytical dispersion relation of the functionally graded plate is obtained by solving an eigenvalue problem. The convergence and the validation of the proposed theoretical numerical model are performed to demonstrate the efficacy of the model.