• 대한조선학회지
• /
• 제19권2호
• /
• pp.33-39
• /
• 1982

It is one of the basic problems of naval architecture and ocean engineering how to describe the wave kinematics normally under the assumption of an ideal fluid. At present, there are many wave theories available for design purposes. These can be classified into two groups: One is the analytic theory and the other is the numerical theory. This paper briefly introduces the stream function method of R.G. Dean which belongs to the latter group and shows its numerical evaluations exemplified for two cases: One is applied to observed waves and the other is for design waves. In the former case, the wave profiles are calculated by the stream function method and compared with those of the observed waves and also with the results of R.G. Dean. They show good agreement. In the latter case, the wave kinematics and wave loads on a column of diameter 1m are calculated by the stream function method and these are compared with those resulted from the 5th-order gravity wave theory. As a result of comparison the values by the stream function method are slightly larger than those by the 5th-order gravity wave theory but the difference are negligible. From this it is concluded that the stream function method is very useful. And as characteristics of the numerical theories, the stream function method of R.G. Dean can be easily extended to the higher order terms and can include easily the current velocity and the pressure distribution on the free surface. In addition, when the data of observed wave profile are given, this method can reproduced the observed wave profile as closely as possible so that this method seems to describe the ocean wave more realistically. And from standpoint of a mathematical principle the stream function method exactly satisfies the kinematic free-surface boundary condition.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 추계학술대회
• /
• pp.149-150
• /
• 2013

최근 외해의 파랑을 막기 위한 방파시설로 유공방파제가 다수 설치되고 있다. 일반적으로 유공방파제는 전면에 유공격실을 설치하여 유공에서 난류를 발생을 유도하여 반사파를 저감하고, 최대 파력도 저감하는 목적을 지닌다. 유공벽은 폭풍파에 직접 노출되어 있어 쇄파 발생시 충격적인 파압이 작용될 수 있어 설계 시 유의하여야 한다. 본 논문에서는 이러한 문제가 없는 공진수로를 이용한 새로운 개념의 유공방파제를 제안하고, 중요 설계변수 변화에 대하여 제안한 시스템의 반사특성을 수치적으로 모의하였다. 수치해석은 유공판을 통과하면서 발생하는 난류에 의한 에너지 소모효과를 고려할 수 있는 선형 포텐셜 이론에 기초한 Galerkin 유한요소 모델을 이용하여 수행하였다. 유공판의 유공율에 따른 반사율 변화를 살펴보았다.

• 대한조선학회논문집
• /
• 제45권2호
• /
• pp.144-150
• /
• 2008

Ships and offshore structures are exposed to wave and engine excitation loadings during navigation and cargo/ballasting operations. These excessive loads may cause damages to hull and may result loss of life the ship. Therefore, it is important to develop a system that allow accurate measurements of global hull loads. The objective of the study is developing a fiber optic monitoring system that is capable of monitoring, recording and warning of the vessel performance. A method for measurement of global loads on a vessel, using strain measurements from a network of fiber optic strain sensors and extensive finite-element analyses(FEA) with idealistic load cases, is presented. The method has been successfully validated on the idealized ship structure model with strain sensors.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.971-980
• /
• 2018

Using the concept of quasi-static decomposition and using three-noded isoparametric locking-free element, this article presents a formulation of the finite element method for Timoshenko beam subjected to spatially different time-dependent motions at supports. To verify the validity of the formulation, three fixed-hinged beams excited by the real seismic motions are examined; one is a slender beam, another is a stocky one, and the other is an intermediate one. The numerical results of time histories of motions of the three beams are compared with corresponding analytical solutions. The internal loads such as bending moment and shearing force at a specific time are also compared with analytic solutions. These comparisons show good agreements. The comparisons between static components of the internal loads and the corresponding total internal loads show that the static components predominate in the stocky beam, whereas the dynamic components predominate in the slender one. Thus, the total internal loads of the stocky beam, which is governed by static components, can be predicted simply by static analysis. Careful numerical experiments indicate that the fundamental frequency of a beam can be used as a parameter identifying such a stocky beam.

• 대한조선학회논문집
• /
• 제37권3호
• /
• pp.99-109
• /
• 2000

본 연구에서는 대파고 파랑 중을 항해하는 선박의 슬래밍 충격에 대한 선체 전체의 동적 탄성응답 해석법을 개발하였다. 선체구조는 전단효과를 고려하는 박판보 유한요소이론을 활용하였으며, 선체 각 단면에 작용하는 유체력은 통상의 선형 운동체 이론에 덧붙여 물체 경계의 비선형성을 고려하여 추정하였다. 즉 매 순간 선체와 파 입자간의 접수 형상을 고려하는 비선형 유체력 추정법을 모멘텀 슬래밍 이론에 근거하여 정식화하였다. 개발된 해석법의 검증을 위해 V형 단면 선형과 S-175 선형 모델을 대상으로 수치해석을 수행하였다. 시간 영역에 있어 각 단면에서의 파면에 대한 상대 변위 성분과 속도 성분들을 계산하였으며, 선체 중앙 단면에서의 굽힘 모멘트 값의 시간이력을 검토하였다.

• 한국가시화정보학회지
• /
• 제8권3호
• /
• pp.56-62
• /
• 2010

The interaction patterns between shock wave and boundary layer in a rocket nozzle are mainly classified into two categories, FSS(Free Shock Separation) and RSS(Restricted Shock Separation), both of which are associated with the thrust characteristics as well as side loads of the engine. According to the previous investigations, strong side loads of the engine are produced during the period of transition from FSS to RSS or vice versa. The present work aims at investigating the unsteady behavior of the separation shock waves in a two-dimensional supersonic nozzle, using experimental method and CFD. Schlieren optical method was employed to visualize the time-mean and time-dependent shock motions in the nozzle. The unsteady, compressible N-S equations with SST K-$\omega$ turbulence closure were solved using a fully implicit finite volume scheme. The results obtained show the separation shock motions during the transition of the interaction pattern.

• 한국항해항만학회지
• /
• 제26권4호
• /
• pp.441-447
• /
• 2002

전세계적인 인구증가와 산업화로 인하여 육지면적의 부족, 육상자원의 고갈 등의 문제로 해양의 이용 및 개발의 관심이 늘어나고 있으며, 환경친화적인 해양공간을 확보하기 위하여 초대형 부유식 해상구조물에 대한 기술개발이 요구되고 있다. 본 논문에서는 초대형 부유식 구조물의 상부구조물에 대한 시간이력해석법에 대하여 소개하고 파랑하중에 의한 부체변형을 이용한 시간변위이력 산정 방법을 제안한다. 또한 주기 및 진폭의 변화에 따른 상부구조물의 동적 시간이력응답 결과를 분석하고 초대형 부유식 상부구조물 시설계안의 동적구조안전성을 평가한다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.22-30
• /
• 2005

Sloshing loads, produced by the violent liquid free-surface motions inside the cargo tank have become an important design parameter in ship building industry since there have been demands for the increased sizes of the cargo containment system of LNG carriers. In this study, sloshing impact pressure acting on the shell of the spherical cargo tank of an LNG carrier as well as dynamic pressure and flow behavior around the pump tower located at the center of the tank have been calculated. Comparative numerical sloshing simulations for a spherical LNG tank using 2-D LR.FLUIDS which is based on the finite difference method and 3-D MSC.DYTRAN which is capable of calculating nonlinear fluid-structure interaction have been carried out. A method of calculating sloshing-induced dynamic loads and the subsequent structural strength analysis for pump tower of a spherical LNG carrier using MSC. DYTRAN and MSC.NASTRAN have been presented.

• 대한조선학회논문집
• /
• 제52권3호
• /
• pp.198-205
• /
• 2015

In this study, numerical studies using a Computational Fluid Dynamics(CFD) method were carried out to estimate the green water load acting on the breakwater plate of bow deck of container carrier, KCS. For the green load water load analysis, a full load condition was considered. The relative motions at bow deck were calculated from the seakeepig analysis. Statistical analysis were carried out to estimate the long term response of the relative motions with the North Atlantic wave scatter diagram. The equivalent design wave was determined from the RAO of the relative motions at bow and the long term responses. CFD geometry modeling with three different locations and simulations for the green water loads were carried out in the equivalent design waves. A commercial CFD program, STAR-CCM+ Ver. 8.04, was used and the green water pressures on the breakwater plate were calculated successfully. The CFD analysis for green water loads can be used as a useful design tool for the evaluation of the breakwater plate of the container vessel.

• 대한기계학회논문집
• /
• 제11권3호
• /
• pp.488-500
• /
• 1987

본 연구에서는 축대칭 봉재의 원주상에 기계가공된 인공릿지가 공구를 통하여 진행할 때의 변형모델을 제시하고 이를 상계해법으로 해석하여 표면소성 연마가공이 되기 위한 릿지의 물결모양운동과 이 운동이 일어나지 못하고 릿지가 편평해지면서 소 멸되고 또는 전단이 되는 경우들에 대한 판정조건 및 한계영역을 설정하였다. 순동 및 연강 그리고 알루미늄등을 시험재료로하여 이론적으로 예측된 릿지의 세 가지 운동 에 대해 실험을 통하여 검증하였으며 물결모양운동으로 인한 가공물의 표면조도 개선 정도를 시험전후에 최대높이 표면조도의 크기로 측정하여 비교하였다. 또한 릿지의 물결모양운동으로 인하여 가공물의 표층부에 형성된 가공변질층의 깊이를 이론적으로 예측하여 실험과 비교하였다.