• Journal of the Korean Society of Marine Environment & Safety
• /
• v.3 no.1
• /
• pp.51-71
• /
• 1997

As passenger ship accidents so frequently have occurred, crisis consciousness is highly aroused in Korean society. Although bombastic policy guidlines were suggested in accordance with every passenger ship accident, there remains a still high possibility of such an accident reoccurring because passenger ship accidents occur from the perspective of non-compliance. The research objective of this study is to government's safety regulatory policies. Data for the analysis was collected from literature review. A Case study related to passenger ship accident is adopted for the analysis. The research methods utilized in this study consist of extensive quantitative analysis of 138 passenger ship accidents which had happened over last 10 years from 1984 to 1993 in Korea and a qualitative analysis of the passenger ship accident of the Seohae Ferry in October 1993. The results of the quantitive analysis on the 138 passenger ship accidents are as follows; Seeing the accidents yearly, the accidents which occurred by policy non-compliance are still exist, only somewhat reduced as years gone by. Seeing the accidents from the perspective of types of accident, fire accidents and death and injury accidents had more non-compliance factors than contact accidents and one-side collision accidents, etc. had. Seeing the accidents from the perspectives of types of passenger ship, large ships like car ferries and general passenger ship accidents had more non-compliance factors than any other kinds of ships had. Seeing the accidents from the perspectives of tons of passenger ships, large ships weighing more than 1, 000 tons and small ships weighing less than 50tons contained a lots of non-compliance factors. The results of the qualitative analysis of the passenger ship accident of the Seohae Ferry in Octovber 1993 are as follows; From the viewpoint of the human factor, there were non-compliance to the recruiting of required number of qualified crew members and non-compliance to the rule which prohibited them from leaving port in bad weather and high wave conditions. From the viewpoint of the ship factor, there were defects in the ship. So we might say that there was non-compliance which was aroused from the lacks of technical skills. From the viewpoint of the administrative factor, there were many non-compliance factors such as sailor education, shipping management, rescue, safety equipment. From the viewpoint of the passenger factor, there were passengers' threats which compelled the crews to leave the port under bad weather conditions. In conclusion, the principal non-compliances factors are passenger ship company did not follow safety rules such as shipping the permitted number of passengers, loading permitted tons of freight and fastening freights properly and recruiting required number of qualified crew. In order to reduce accidents, firstly we should find out the causes which play key roles in passenger ship companies' non-compliance to the government's safety regulations. Secondly we should tackle the causes.

• Journal of the Korean Geophysical Society
• /
• v.6 no.1
• /
• pp.39-46
• /
• 2003

Twin stone pagodas of the ruins of Kamunsa temple at Kyongju city, Kyungsangbukdo were believed to be built in 682 during the Unified Shilla Kingdom. The 13.4-m-high granodiolite pagodas with the base of 6.78 m x 4.4 m are the largest three-story stone pagoda in Korea. The western pagoda which was re-organized in 1959 is observed to be on the process of severe weathering. Also, some stone contacts are represented by the shape of sharp chevron, which is probably caused by the uneven loading due to the structural unbalance. For the structure-safety diagnosis of the western pagoda, it is necessary to understand its site characteristics and surrounding subsurface environment. Combined geophysical survey such as seismic and resistivity methods was carried out around the western pagoda. The range of 55∼350 Ωm is shown around the pagoda from the electrical resistivity mapping by the Wenner method. The higher resistivities occur the southwestern area, while the lower (<100 Ωm) values indicating the weaker subsurface appear to be on the northeastern area. This result coincides with the measurement of a leaning angle of the pagoda. Along 6 seismic lines, about 3-m-thick uppermost section around the pagoda shows the P-wave velocity of 200∼700 m/s from the refraction survey. Based on the integrated geophysical survey, the foundation of the pagoda is estimated to be in the form of 11-m-side square down to the depth of 3 m.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.4
• /
• pp.21-31
• /
• 2014

Recently, the research on renewable energy against depletion of fossil fuel have been actively carried out in the world. Especially, offshore wind turbines are very economical and innovative technology. However, offshore wind turbines experience large base moments due to the wind and wave loading, so the monopile with large diameter needs to be applied. For the economical design of the large diameter pile, it is important to consider the flexibility of the foundation to estimate the maximum moment accurately, based on studies conducted so far. In this paper, the foundation was modeled using the finite element method in order to better describe the large diameter effect of a monopile and the results were compared with those of p-y method. For the examples studied in this paper, the change in maximum moment was insignificant, but the maximum tilt angle from the finite element method was over 14% larger than that of p-y method. Therefore, the finite element approach is recommended to model the flexibility effect of the pile when large tilt angles may cause serviceability issues.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.6
• /
• pp.287-292
• /
• 2021

Load and resistance factor design is an efficient design approach that provides a system of consistent design solutions. This study aims to determine the load and resistance factors needed for the design of breakwater foundations within a probabilistic framework. In the study, four typical types of Korean breakwaters, namely, rubble mound breakwaters, vertical composite caisson breakwaters, perforated caisson breakwaters, and horizontal composite breakwaters, are investigated. The bearing capacity of breakwater foundations under wave loading conditions is thoroughly examined. Two levels of the target reliability index (RI) of 2.5 and 3.0 are selected to implement the load and resistance factors calibration using Monte Carlo simulations with 100,000 cycles. The normalized resistance factors are found to be lower for the higher target RI as expected. Their ranges are from 0.668 to 0.687 for the target RI of 2.5 and from 0.576 to 0.634 for the target RI of 3.0.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.5
• /
• pp.27-40
• /
• 2023

A pile is a structural element that is used to transfer external loads from superstructures and has been widely utilized in construction fields all over the world. The method of installing a pile into the ground should be selected based on geotechnical conditions, location, site status, environmental factors, and construction costs, among others. It can be divided into two types: direct hammering and preboring. The direct hammering method installs a pile into the bearing layer, such as rock, using a few types of hammer, generating a considerable amount of pile driving-induced vibration. The vibration from pile driving influences adjacent structures and the ground; therefore, quantitatively investigating the effects of vibration is inevitably required. In this study, two-dimensional dynamic numerical modeling and analysis are performed using the finite difference method to investigate the influence on the adjacent slope, including temporary supporting system. Time-dependent loading induced by pile driving is estimated and used in the numerical analysis. Consequently, large surface displacement is estimated due to surface waves and less wave deflection, and refraction at the surface. The total displacement decreases with the increase of the distance from the source. However, lateral displacement at the top of the slope shows a larger value than vertical displacement, and the overall displacement tends to be concentrated near the face of the slope.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.3
• /
• pp.287-301
• /
• 2009

The novel cut-and-cover tunnel construction method using rib-reinforced pre-cast arch segments has been recently developed and applied for practice to secure a structural stability of high covering and wide width section tunnels. Cut-and-cover tunnels are usually damaged by the seismic behavior of backfill grounds in case of a low covering condition. Seismic analyses are performed in this study to characterize the dynamic behavior of rib-reinforced pre-cast arch cut-and-cover tunnels. Seismic analyzes for 2 lane cast-in-place and rib-reinforced pre-cast arch cut-and-cover tunnels are carried out by using the commercial FDM program (FLAC2D) considering various field conditions such as the covering height embankment slope and excavation slope. It can be concluded that the amplification of seismic wave is reduced due to an increase in the structural stiffness induced by rib-reinforcement. The results show that the rib-reinforced pre-cast arch cut-and-cover tunnels are more effective against the seismic loading, compared to the cast-in-place cut-and-cover tunnels.