• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.413-430
• /
• 2007

This study analyzed the foreign substances in waterlogged archaeological woods and compounds in soil where waterlogged archaeological wood was buried, in order to examine the relationship between burial environment and foreign substances in waterlogged archaeological wood. The XRF(X-ray Fluorescence Spectroscopy) and EDX(Energy Dispersive X-ray) analysis were conducted to examine the effect of iron(Fe) to blacken the waterlogged wood. The XRF results showed that investigated soil contained Si, Al, and Fe. Wood ash contained more sulfur and Fe than any other elements in the EDX analysis. Cellulose and hemicellulose were significantly reduced at the surface of wood, which is the blackened part of waterlogged wood. Foreign substances changed the surface color. These problems could be solved by removal of foreign substances in waterlogged archaeological wood using EDTA(Ethylene Diamine Tetra Acetic acid). The optimum condition to remove Fe from waterlogged wood by EDTA was investigated. To do this, the concentration of Fe removed was measured with various concentration of EDTA-2Na. The optimum pH of EDTA-2Na was figured to be 4.1 to 4.3. As the concentration of EDTA increased, the extracted concentration of Fe also increased. In the case of 0.4 wt% of EDTA-2Na, about 60ppm of Fe was eliminated and was stabilized after 48 hours. In the case of EDTA-3Na, the optimum pH was 7 to 8, and about 10 ppm of Fe was eliminated at 0.4 wt% of EDTA-3Na. In the case of EDTA-4Na, the optimum pH was 10 to 11, and about 20 ppm of Fe was eliminated at 0.4 wt% of EDTA-4Na. In conclusion, the iron(Fe) in waterlogged archaeological wood was removed by EDTA treatment and it increased the whiteness of the surface.

• Journal of Applied Biological Chemistry
• /
• v.43 no.1
• /
• pp.25-30
• /
• 2000

The main form of nitrogen fertilizer applied to lowland rice is urea, but little is known about its transport in waterlogged soil. This study was conducted to investigate the transport of urea in waterlogged soil column using WAVE (simulation of the substances Water and Agrochemicals in the soil, crop and Vadose Environment) model which includes the parameters for urea adsorption and hydrolysis, The adsorption distribution coefficient and hydrolysis rate of urea were measured by batch experiments. A transport experiment was carried out with the soil column which was pre-incubated for 45 days under flooded condition. The urea hydrolysis rate (k) was $0.073h^{-1}$. Only 5% of the applied urea remained in soil column at 4 days after urea application. The distribution coefficient ($K_d$) of urea calculated from adsorption isotherm was $0.21Lkg^{-1}$, so it was assumed that urea that urea was a weak-adsorbing material. The maximum concentration of urea was appeared at the convective water front because transport of mobile and weak-adsorbing chemicals, such as urea, is dependent on water convective flow. The urea moved down to 11 cm depth only for 2 days after application, so there is a possibility that unhydrolyzed urea could move out of the root zone and not be available for crops. A simulated urea concentration distribution in waterlogged soil column using WAVE model was slightly different from the measured concentration distribution. This difference resulted from the same hydrolysis rate applied to all soil depths and overestimated hydrodynamic dispersion coefficient. In spite of these limitations, the transport of urea in waterlogged soil column could be predict with WAVE model using urea hydrolysis rate (k) and distribution coefficient ($K_d$) which could be measured easily from a batch experiment.

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.11a
• /
• pp.122-134
• /
• 2005

XRF, EDX, IR analysis was conducted to figure the effect of Fe to blacken the waterlogged wood. The results showed that investigated soil contained more Fe than normal soil by XRF analysis and wood ash contained more sulfur and Fe than any other element by EDX analysis. C-H and C-O peaks were significantly reduced at the surface of wood where is blackened part of waterlogged wood by IR analysis. The optimum condition to remove Fe from waterlogged wood by EDTA was investigated. To do this, removed concentration of Fe was measured at various concentration of EDTA-2Na. The optimum pH of EDTA-2Na was figured to be 4.1 to 4.3 and as the concentration of EDTA was increasing, extracted concentration of Fe was also increased. In the case of 0.4 wt% of EDTA-2Na, 700ppm of Fe was eliminated and was stabilized after 48 hours time lapse. In the case of EDTA-3Na, the optimum pH was 7 to 8, and 10 ppm of Fe was eliminated at 0.4 wt% of EDTA-3Na. In the case of EDTA-4Na, the optimum pH was 10 to 11, and 120 ppm of Fe was eliminated at 0.4 wt% of EDTA-4Na.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.3
• /
• pp.187-199
• /
• 1984

• Journal of Conservation Science
• /
• v.6 no.2 s.8
• /
• pp.126-140
• /
• 1997

There were some cases in the past that waterlogged wooden finds were neglected and damaged severely because adequate methods of conservation processing could not be found. However, since a wooden ship unearthed in Anapji of Kyongju was processed by poly(ethylene glycol) (PEG) impregnation method in 1975, most of waterlogged wooden finds have been processed by diverse scientific methods. Most commonly-used conservation processing methods of waterlogged wooden finds in Korea are PEG impregnation method, alcohol-ether-resin method and vacuum freeze-drying method. New methods developed recently in Europe and Japan such as sucrose method, sugar-alcohol method and higher alcohol method are also being studied here. The most important task in conservation processing of waterlogged wood is to find good impregnation materials suitable to Korean climate and environments and develop their application methods. For efficient conservation processing, it is important to know the natures of finds and impregnation materials and relation between impregnation and drying condition. To achieve it, many experiments and studies are needed.

• Geomechanics and Engineering
• /
• v.39 no.4
• /
• pp.407-423
• /
• 2024

Construction on waterlogged ground presents significant challenges for geotechnical engineers due to the low bearing capacity, high water table, and risks of post-construction settlement, all of which can compromise the stability of buildings. This study aims to investigate the settlement behavior of foundations on such terrains and recommend suitable foundation types to safely support building loads. To achieve these objectives, three-dimensional coupled consolidation analyses were performed to evaluate the bearing capacities of shallow footings with dimensions of 1.22 × 1.22 m² and 1.83 × 1.83 m². The results showed ultimate load capacities of approximately 10 kN and 21 kN, respectively, for these footings on waterlogged ground. To enhance these capacities, the use of pit sand as a filling material was explored, yielding substantial improvements. The bearing capacity of the 1.22 × 1.22 m² footing increased by a factor of 9, while the 1.83 × 1.83 m² footing saw a sixfold improvement. In addition, alternative foundation solutions were evaluated to achieve higher load-bearing capacities. These included raft foundations, single piles, pile groups, and piled raft foundations. Among these, a single pile demonstrated an ultimate load capacity of 300 kN, while a (2 × 2) pile group supported up to 400 kN. The piled raft foundation exhibited the highest capacity, with an ultimate load of 620 kN. These findings provide valuable insights into effective foundation designs for waterlogged conditions, enabling safer and more reliable construction practices.

• Journal of Conservation Science
• /
• v.29 no.3
• /
• pp.243-247
• /
• 2013

This study was conducted to investigate the penetration of PEG for conservation treatment conditions of archaeological waterlogged wood. The weight percent gain was examined, depending on the solvent of PEG, concentration and treatment period and temperature of treatment solutions. The penetration of PEG in the cell lumina of treatment woods was observed by scanning electron microscope. The results showed that the type of solvents had no influence on PEG penetration. In the concentration of the PEG treatment solutions, the weight percent gains (WPGs) were increased with increase in concentration of PEG. In terms of the period of the soaking treatment, a maximum WPGs were obtained for only 20 days. There was no distinctive difference in the WPGs by difference the temperature of the treatment. In conclusion, in the conservation of small size of archaeological waterlogged wood, it is confirmed that optimal solvent type and treatment period of PEG are water and 20 days, respectively.

• 한국문화재보존과학회:학술대회논문집
• /
• 2003.09a
• /
• pp.48-54
• /
• 2003

• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.110-118
• /
• 2004

In order to evaluate two-step treatment of PEG-freeze drying for highly-degraded waterlogged ash woods (Fraxinus PP.; ca. 5,700 BP), which were excavated from peat lands in western Korea, dimension stability was examined during 45 months after complete treatment. The samples pre-treated with PEG in water solution showed better dimensional stabilities than the ones with PEG in t-butanol(TBA) solution. It suggests that TBA reduced the flexibility of wood cells and overflying by TBA induced micro-checks during freeze drying. Micro-checks results in fragile wood structures and consequently, large shrinkage by moisture absorbances of high PEG contents during exposure in humid condition. The results suggest that PEG in water-solution treatment is better than PEG in t-butanol as pretreament for freeze drying of highly-degraded waterlogged ash woods.

• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.95-99
• /
• 2012

The compressive strength of PEG along processing concentration and solvent is willing to be measured and proper processing condition for exhibition and storage is also willing to be measured by comparing with dimensional stability. In the advanced research of setting PEG-preprocessing concentration & solvent for freeze drying of waterlogged archaeological wood of high water content, vacuum freeze drying showed the highest dimension stability after 40% PEG-preprocessing of aqueous solution. In this study, the compressive strength increased in proportion of processing concentration and water showed the relatively-higher compressive strength than t-butanol regarding solvent. Especially, it showed that there is no big strength difference between PEG 40% and PEG 50% in aqueous solution by 6.6%(16kgf/$cm^2$). According to the above results, it was recognized that it is most effective to implement freeze drying after 40% PEG-preprocessing when want to dimensional stability and compressive strength simultaneously.