• Toxicological Research
• /
• v.7 no.1
• /
• pp.51-59
• /
• 1991

The purpose of the present study was to investigate the effects of non-watering, fasting and non-watering fasting for 16-17 hrs on haematological and biochemical parameters in SD rats. 1. Liver weight was decreased in the order of in the fasting group, non-watering fasting group and non-watering group in both sexes. 2. In fasting group and non-watering fasting group, haematologic parameters of male (HGB and MCH) and femal (MCHC) were trends to decrease compared with normal feeding & watering group. 3. In the differential leucocyte counts, there were no significant differences compared with noraml feeding % watering group.

• Journal of the Korean Society of Tobacco Science
• /
• v.14 no.1
• /
• pp.42-47
• /
• 1992

This study was conducted to determine the effects of the bottom watering method on seedling growth, temperature of seedbed and working hours. The results of compared conventional watering with bottom watering were as follows: 1. The lowest and highest temperature on surface of bottom watering seedbed were higher about 2-3$^{\circ}C$ and 3-5$^{\circ}C$ than those of conventional plot, respectively. 2. At 30 days after seeding, flesh and dry weight of seedling in bottom watering seedbed were heavier about 121% and 62% than those of seedling in conventional plot, respectively, while dry ratio of that was lower about 30.2%. 3. Plant height of transplanting seedling in bottom watering seedbed was higher about 4-5cm than that of seedling in conventional plot. Otherwise, ratio of top to root and length of root were not significant. 4. Working hours of bottom watering for growing seedling were reduced 40.9% and 53.4% in primary and secondary seedbeds as compared with those of conventional plot, respectively.

• The Korean Journal of Mycology
• /
• v.16 no.4
• /
• pp.207-209
• /
• 1988

Sporocarps of Pleurotus tuber-regium Fr. were subjected to aerial and substrate(soil) watering sytems. Although aerial watering enhanced quick enlargment of pilei, those watered indirectly through the soil developed more naturally pigmented sporophores and with higher overall yield. Thus, substrate(soil) watering after emergence is preferred to direct watering of fruits.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.4
• /
• pp.886-889
• /
• 1999

To develope the soybean sprouting equipment(a type of cabinet) for medium amount(one bucket; 10~13kg) production of soybean sprouts, the watering system was made of four siphons and four the bottle necked water tank. Diameter of four siphons used for development of the watering system were 8, 13, 17 and 21mm, respectively and their water exhausting volumes were 40, 92, 154, 524ml/sec, respectively. The watering system can be automatically watered 524ml/sec without electric supply. The soybean sprouting equipment is consisted of four the bottle necked water tanks with the four siphons and six sprouting buckets with net shaped bottom for water draining. The soybean sprouting equipment with the watering system may be produced more than one box a day in the condition of 6~7 watering times a day at 25~30oC.

• Journal of Korea Water Resources Association
• /
• v.54 no.12
• /
• pp.1215-1222
• /
• 2021

In this study, a study on how to use a fire hydrant as a heat wave reduction facility through hydraulic analysis of the water supply pipe network was conducted. Assuming that the fire hydrant installation point is open for heat wave reduction, the water pressure at each point was derived. And the reduction rate of the temperature according to the hydrant watering was compared with the watering area according to the operation of the watering truck. The watering area according to the opening of the fire hydrant was calculated by deriving the pressure value at the node where the fire hydrant was installed through hydraulic analysis of the water pipe network, and then using the watering radius relational expression according to the pressure value. As a result of applying the proposed methodology to two real city areas, the temperature reduction effect of the watering method by a fire hydrant can be derived lower than the watering method by a watering truck according to the difference in the absolute watering area. However, unlike a watering truck, a fire hydrant does not have a relative restriction on the amount of water supply and is expected to allows continuous divided spraying of the same area.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.4
• /
• pp.41-48
• /
• 1986

This study was fulfilled by the weighing lysimeter method at the experimental farm of KonKuk University from April to June of 1986 to investgate the amount of evapotranspiration ( ET-lettuec )by the growing periods, evapotranspiration ratio, amount of watering per one time, days of intermission and soil moisture extraction pattern of the crisphead lettuce cultivated in the clay loam soil by different watering points of pFl.7, pF2.O, pF2.7. The results obtained are summar ized as follows : 1.The total evapotranspiration(ETlettuce) of the pFl.7 treatment plot was 358,9mm., 314.9mm in the pF2.O plot and 281.8mm in the pF2.7 plot, therefore the total ETlettuec increased with the difference of 33mm-44mm by the decrease of watering point. 2.The daily maximum ETlettuce by the watering points was 7.66mm, 6:54mm, 5.98mm, respectively in the last ten days of May, and the mean daily ETlettuce during the growing season by the watering points of pFl.7, pF2.O and pF2.7 was 5.44mm(384.5g), 4.77mm(337.2g) and 4.27mm(301.8g), respectively. 3.The evapotranspiration ratio showed maximum value in the middle of May which was the beginning of mid-season stage, and the mean evapotranspiration ratio during the total growing period was 1A7, 1.29, 1.15 by the watering points. 4.The days of watering intermission by the watering points of pFl.7, pF2.O and pF2.7 was 1.0day, 2.9days and 12.Sdays, respectively. 5.The yield of the crisphead lettuce by the watering treatments showed very high significance, and the pF2.O was confirmed as a optimum watering point. 6.The soil moisture extraction pattern(SMEP) of the pF2.0 treatment plot in the initial stage was 85.6% in the 1st and 2nd soil layer and 14.4% in the 3rd and 4th layer, and in the midseason stage, the moisture extraction proportion of the under layer accounted for 34.7%which showed that the root elongated to the lowest soil layer, and there was no difference of the SMEP between the mid-season and late-season stage. 7.The correlation coefficient between the ETlettuce and yield of lettuce by the three watering points was.739, which showed the significance of 5%.

• KIEAE Journal
• /
• v.9 no.6
• /
• pp.51-56
• /
• 2009

The most important advantages of atrium buildings are to allow the abundant natural lighting and outside views. However, the abundant lighting frequently causes to increase a cooling load in summer. The roof watering systems are useful to reduce the cooling load and save the energy. This study aims to investigate the effects of the roof watering system in atrium through the scaled model experiments. For the study, the 1/20 scaled model was made and tests were performed under the clear sky conditions through August 24 to september 7 in 2008. The model size was $45{\times}45{\times}60(cm)$ and depth of roof water was 3(cm). As results, the thermal effects of two types of atrium(roof opening, and roof and front opening,) were evaluated through the experimental points and conditions. It is expected to use the results for the next research to develop the practical roof watering systems for atrium.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.613-622
• /
• 2000

Watering operation for oyster mushroom growing houses is regarded as drudgery and time consuming farm operation for growers. Most of mushroom growing beds in oyster mushroom growing houses are designed as two-row with four floor beds, therefore the watering and ventilation between the bed floors are much difficult for farmers because of its structural design. The study aimed to reduce the watering operation and improve the mushroom growing environment through the humidification and air supply on mushroom growing beds. Results showed that appropriate size of nozzle is between 0.8~0.5ml/s for the humidification and higher than the 2.0ml/s for the watering. The optimum water supply pressure was regarded as between 1.0~2.0MPa and the uniform distribution of droplet on the bed showed on air flow speed of 14m/s. The prototype was equipped with twin nozzle with. the humidification nozzle of 0.85ml/s and watering nozzle of 5.0ml/s, and the air blast fan with the air speed of 10m/sec in each air spout. In the field test in a practical scale mushroom growing house, it was well operated dependant on the set desire by a electric control unit. The machine can be practically used as air blast watering and air blast humidification for oyster mushroom growing farms without manual.

• Journal of the East Asian Society of Dietary Life
• /
• v.11 no.3
• /
• pp.219-224
• /
• 2001

This study was conducted to investigate the optimal conditions for the growth of soybean sprouts by ozone water watering. Optimal conditions for ozone water watering of soybean sprouts during cultivation at 2$0^{\circ}C$ were evaluated with ozone concentration(0.1~O.5 ppm) and watering frequency(1~9 times) by response surface methodology. The optimal conditions for growth of soybean sprouts were ozone concentrations of 0.20~0.32 ppm, ozone treatment frequency of 3.0~4.4 times. Germination rates, hypocotyl weights and hypocotyl lengths in the soybean sprouts cultivated under the optimal conditions increased by 13.3, 10.1 and 11.9%, respectively, whereas root weights decreased by 89.0%.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.694-702
• /
• 2013

The purpose of this study is to evaluate a de-watering filtrate treatment and the possibility of securing biological treatment capacity by changing the structure of the secondary clarifier. Accordingly, the column test was conducted to determine the effect of polymer in the de-watering filtrate on sludge sedimentation. Also, the characteristics of de-watering filtrate processing was evaluated through batch test and continuous processing operation. The results showed that sludge settling velocity increased with higher polymer concentration, and that effluent SS concentration was found to decrease. Regarding processing characteristics of de-watering filtrate, the removal efficiency of TSS and TBOD5 increased as the length of secondary clarifier was longer. Also, comparing injections into anoxic tank and secondary clarifier, de-watering filtrate by continuous infusion treatment process showed stability in both conditions. Therefore, by modifying the structure of secondary clarifier, efficient processing of de-watering filtrate is expected to be possible and processing capacity of small sewage treatment plants is considered to be improved.