• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.410-416
• /
• 2012

Isophorone diisocyanate (IPDI), polycarbonate diol (PCD), dimethylol propionic acid (DMPA)를 출발물질로 하여 수분산 폴리우레탄(waterborne polyurethane dispersion, PUD)을 합성하였다. 이 PUD에 아크릴 단량체인 HEMA (2-hydroxyethyl methacrylate):MMA (methyl methacrylate), HEMA:BA (butylacrylate), HEMA:BMA (butyl methacrylate), HEMA:HEA (2-hydroxyethyl acrylate), HEMA:PETA (pentaerytritol triacrylate) 혼합물을 첨가하여 수분산 폴리우레탄-아크릴 혼성 용액을 제조하였다. 또한 아크릴 단량체의 종류가 수분산 폴리우레탄-아크릴 혼성 용액의 내약품성과 내마모성에 미치는 영향을 조사하였다. 실험 결과 내약품성은 HEMA와 MMA를 중합한 것이 가장 우수했으며, 내마모성은 HEMA와 PETA를 중합한 것이 가장 우수한 결과를 나타내었다.

• 한국식물병리학회지
• /
• 제11권3호
• /
• pp.230-237
• /
• 1995

Airborne and waterborne ascospores and conidia of Botryosphaeria dothidea were collected in apple orchards at Suwon and Chunan in 1992 through 1994. Both waterborne and airborne spores were first detected in mid April to early May. Thereafter, spores were abundant in early June to late August and present until early December. Rainwater collections contained much more conidia than ascospores during the apple growing seasons. Airborne ascospores catches, which were also detected on humid days without measurable rainfall, were much more than airborne conidia catches. High amounts of ascospores were detected in early times of apple growing season, whereas most conidia catches occurred in later times of the season. The number of waterborne conidia and airborne ascospores was positively correlated with mean daily maximum, minimum, and average air temperatures during the trapping periods (p=0.01). However, no significant correlation was found between the number of spores and the total precipitation during the trapping periods.

• 대한의생명과학회지
• /
• 제16권1호
• /
• pp.10-18
• /
• 2010

The present study was set to develop comprehensive system for assessing the safety of drinking water using PCR-reverse blot hybridization assay (REBA). The REBA developed in this study can detect waterborne pathogens such as Shigella spp., Salmonella spp., Citrobacter spp., Enterobacter spp., Klebsiella spp., Yersinia spp., Mycobacterium spp., Listeria spp. at the genus level, and Escherichia coli, Citrobacter freundii, Klebsiella pneumoniae, Pseudomonas aeruginosa, Yersinia enterocolitica, Y. pseudotuberculosis, Mycobacterium avium complex, M. marinum, Enterococcus faecalis, and Staphylococcus aureus at the species level, and E. coli O157:H7 at the strain level.

• Macromolecular Research
• /
• 제15권1호
• /
• pp.22-30
• /
• 2007

High water vapor permeable coating materials were prepared by blending aqueous poly(vinyl alcohol) (PVA) solution with waterborne polyurethane-urea (WBPU) dispersions synthesized by prepolymer mixing process. Stable WBPU/PVA dispersions were achieved at PVA content below 30 wt%. As the water soluble polymer PVA content increased, the number and density of total micro-pores (tunnel-like/isolated micro-pores) formed after the dissolution of PVA in water increased, and the water vapor permeability of coated Nylon fabric also increased significantly. Using WBPU/water soluble polymer PVA blends as a coating material and then dissolving PVA in water was confirmed to be an effective method to obtain prominent breathable fabrics.

• 한국환경과학회지
• /
• 제14권3호
• /
• pp.359-366
• /
• 2005

Starch was crosslinked with epichlorohydrin. Crosslinked starch-filled waterborne acrylate (CSWAC) films were prepared by blending this crosslinked starch with waterborne acrylate. The thermal and mechanical properties of these films were investigated by thermogravimetric analysis (TGA), tensile strength and elongation test. The biodegradability was also studied by determination of reduced sugar products after enzymatic hydrolysis and the surface morphology was investigated by scanning electron microscopy (SEM). The CSW AC film showed significantly higher tensile strength and elongation than those of starch-filled waterbonre acrylate (SWAC). The biodegradability of this film was higher than that of native starch-filled acrylate film, and was increased by the addition of crosslinked starch to the acrylate film.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.68-75
• /
• 2008

This paper investigates the correlation between surface roughness and gloss of aluminium sheet painted waterborne paint. One customer criterion of automotive quality is the as-painted appearance of the final products. Especially, the current emphasis on control of surface roughness of sanded aluminium sheet has been prompted by the automotive industry's concern with the as-painted appearance. because the influence of such characteristics on paintability, and painted appearance is important in defining outer panel requirements for automobile. This paper is dedicated primarily to the issue of painted appearance and reviews for improvement of roughness. The conclusions are obtained as follows ; 1) Painted aluminium sheet appearance is strongly affected by surface roughness of base-metal and influenced by sand paper and sanding method. 2) The painted appearance of aluminium sheets was determined and related to surface roughness parameters, combination of sand paper.

• Macromolecular Research
• /
• 제11권3호
• /
• pp.198-201
• /
• 2003

Aqueous emulsion of polyurethane (PU) ionomers were reinforced with hydrophobic nanosilica to give composites. The aqueous emulsion was stable and the particle size increased as the content of hydrophobic nanosilica was increased. The reinforcing effect of nanosilica in mechanical properties of these composites were examined by dynamic mechanical and tensile tests, and the Shore A hardness was measured. Enhanced thermal and water resistance and marginal reduction in transparency of these composites were observed compared with pristine polymer. These results were similar with those of our previous studies on waterborne PU/organoclay nanocomposites.

• Macromolecular Research
• /
• 제14권6호
• /
• pp.634-639
• /
• 2006

Waterborne polyurethane (WBPU) adhesive with varying amounts of dimethylol propionic acid (DMPA) was synthesized by prepolymer process and blended with polyisocyanate hardener. The mean particle size of the WBPU dispersion decreased with increasing DMPA content. $^1H$ NMR spectroscopy confirmed the formation of allophanate bonds and biuret bonds due to the reaction of hardener NCO with urethane/urea groups. The optimum NCO content with the greatest adhesive strength was dependent on the total content of urethane/urea groups in the WBPU molecules. The optimum NCO content increased with increasing number of urethane groups (DMPA content). The adhesion strength of WBPU adhesives was maximized at a molar ratio of hardener NCO to urethane/urea of about 0.28.

• Fibers and Polymers
• /
• 제7권2호
• /
• pp.95-104
• /
• 2006

In order to improve the water swelling, thermal/mechanical and adhesion properties of waterborne polyurethane (WBPU), a series of the crosslinkable WBPUs containing hydrophilic ionic component, dimethylol propionic acid (20 mole%), were prepared by in-situ polymerization using a cross-linker hexakis (methoxymethyl) melamine (HMMM). Effects of the HMMM content (2, 4, and 6 wt%) and curing temperature on these properties of the crosslinked WBPUs samples were investigated. All properties were found to increase with increasing HMMM content. It was found that the optimum curing temperature of the WBPU films and adhesives was near $120^{\circ}C$, which was not dependent on the HMMM content.

• Macromolecular Research
• /
• 제13권5호
• /
• pp.418-426
• /
• 2005

One-pack cross-linkable nanocomposites of waterborne methyl ethyl ketoxime (MEKO)-blocked aromatic polyurethane dispersion (BPUD) reinforced with organoclay (quaternary ammonium salt of Cloisite 25A) were synthesized by the acetone process using 4,4'-methylenedi-p-phenyl diisocyanate (MDl), poly(tetramethylene) glycol (PTMG), dimethylol propionic acid (DMPA), and methyl ethyl ketoxime (MEKO). Particle size, viscosity, and storage stability of these nanocomposites were investigated. TEM and XRD studies confirmed that the silicate layers of organophilic clay were exfoliated and intercalated at a nanometer-scale in the BPUD matrix.