• The Korean Journal of Food And Nutrition
• /
• v.28 no.5
• /
• pp.774-781
• /
• 2015

The objective of the present study was to determine the total phenol and flavonoid contents and to evaluate the antioxidant potential, of different solvent extracts (ethyl acetate, n-butanol, chloroform, and water) from Robus idaeus in various radical scavenging models (DPPH activity, superoxide dismutase (SOD) activity, reducing power, and nitrite scavenging activity), along with their antimicrobial potential. Measurement of total phenol and flavonoid content of the ethyl acetate extract of R. idaeus was found to be significantly higher than those of the other extracts. The ethyl acetate extract (at a concentration of $1,000{\mu}g/mL$) showed significantly higher reducing power and DPPH radical scavenging activity as compared to the other extracts. Results were dose-dependent. Moreover, the ethyl acetate extract of R. idaeus ($1,000{\mu}g/mL$) showed potent antioxidant efficacy ($85.5{\pm}1.18%$) as evidenced by nitrite scavenging ability at pH 1.2. All solvent extracts of R. idaeus showed lower SOD-like activity (13.72~20.54%). In addition, the antimicrobial activity of all solvent extracts except water extract showed strong inhibition (inhibitory zones in mm) of Staphylococcus aureus ($19.40{\pm}1.00mm$) and Bacillus cereus ($20.50{\pm}0.21mm$) growth. In particular, ethyl acetate extracts (100 mg/mL) showed antimicrobial activity comparable to that of tetracycline (0.01 mg/mL), which was used as a positive control. The results of this study indicate that the ethyl acetate extract of R. idaeus is a natural antioxidant and antimicrobial, with enriched phenols and flavonoids concentration, that has potential in the development of health-enhancing food products.

• The Research Journal of the Costume Culture
• /
• v.19 no.3
• /
• pp.612-621
• /
• 2011

The process of making or cultivating indigo dyes is very cumbersome and complex. The dye extraction and dyeing methods using general plant dye, moth repellent dye, fast acting natural dye, and other dyes are very different. This research investigates the extraction of indigo dye and liquid dye extraction of polygonum(indigo) plants using calcium oxide water. While extracting indigo dye the concentration of purified indigo dye may be controlled by adjusting the pH level. Due to the various uses of dyes the adjustment of surface color must be considered. In regard to the change according to different concentrations of reducing agents, it was found that cotton fabrics and ramie fabrics show the highest color difference at 0.4% and 0.3% respectively. As the reduction temperature increases, the color difference increases as well. The maximum color difference was found to appear at $90^{\circ}C$. Cotton fabrics and ramie fabrics showed 70.55 and 67.01 respectively. The color difference increases as the concentration of dyes increases, but at a concentration of 300%, cotton fabrics was found to show 6.22PB in H value using the Munsell color system, containing purple and blue color. The pH of the polygonum dyes extracted through this experiment were adjusted by adding calcium oxide to the experimental water, without directly adding calcium oxide to the liquid polygonum extract. In a refine state, it was mixed with polygonum extract to extract a more refine and highly concentrated indigo dye. When lye and reducing agents are added to extracted indigo dye and sealed for long-term storage, it can be effective and easily used for dyeing.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.613-616
• /
• 2008

Many researches on alkali-activated concrete that does not need the presence of cement as a binder have been carried out recently. Instead, the source of material such as fly ash and blast slag, that are rich in Silicon(Si) and Aluminium(Al), are activated by alkaline liquids to produce the binder. Hence concrete with no cement is effect reduction of CO$_2$ gas. In this study, we investigated the influence of the workability and compressive strength of mortar on water reducing agent, alkaline activator and curing method in oder to develop cementless blast slag based alkali-activated mortar. In view of the results, we found out that the flowability of mortar was lowered as increasing to mole concentration of NaOH, but not large the loss of flowability to 9M NaOH, most of water reducing agent was not effect. The compressive strength was improved as increasing to mole concentration of NaOH, was the most effect in 9M NaOH. The curing temperature and curing conditions on compressive strength of blast slag based alkali-activated mortar didn't influence.

• KSBB Journal
• /
• v.29 no.6
• /
• pp.421-425
• /
• 2014

In this study, the antioxidant activities of fractions (methanol, hexane, methylene chloride, butanol, ethyl acetate and water) of Solanum nigrum L. extract was investigated. The contents of total phenolic compounds of each fractions of methanol, butanol, methylene chloride, ethyl acetate, hexane and water are $4.41{\pm}0.23%$, $5.57{\pm}0.35%$, $9.89{\pm}0.19%$, $9.86{\pm}0.19%$, $1.89{\pm}0.04%$, and $3.18{\pm}0.06%$, respectively. For assay of antioxidant activity, 1,1-diphenyl-2-picryhydrazyl (DPPH) radical scavenging activity, reducing power and nitrite scavenging activity are evaluated. In DPPH radical scavenging activity, the highest effect was obtained from the fraction of ethyl acetate. Reducing power is ordered as ethyl acetate > methylene chloride > methanol. In nitrite scavenging activity, the highest activity was 5.5% (butanol fraction), whereas hexane fraction did not detected. Overall, antioxidant activities are closely related the content of phenolic compound in extracts of S. nigrum L.

• Korean journal of food and cookery science
• /
• v.15 no.3
• /
• pp.224-230
• /
• 1999

The purpose of this study was to find out the optimal mixing ratio of green tea powder, sugar, and water for the preparation of Seolgiddeok through Response Surface Methodology based on the color, sensory, and texture test. The oganoleptic and textural properties of Seolgiddeok prepared with various concentrations of green tea powder (0% (control group), 0.5% (GT-0.5 group), 1% (GT-1.0 group), 1.5% (GT-1.5 group), 2% (GT-2.0 group)), and their quality changes during storage were also investigated. The optimal mixing ratio of green tea powder, sugar, and water for preparing the best quality Seolgiddeok was 1.0%, 12%, and 22%, respectively. The proximate composition of green tea powder was 21.70% of crude protein, 8.49% of crude lipid, 2.95% of reducing sugar, and 6.40% of ash. The contents of crude lipid, reducing sugar, and catechins in Seolgiddeok added with a green tea powder were increased with increasing the content of green tea powder. The hardness and gumminess of GT-1.0 group were the lowest among four groups, whereas GT-1.0 and GT-2.0 groups had the lowest cohesiveness. While the control group was the lowest in adhesiveness, the springness was not significantly different among all groups. GT-0.5 and GT-1.5 groups were the highest in sweet taste and colorfulness, respectively. However, GT-1.0 group had the best overall quality. Total microbial numbers, the acidity and pH in Seolgiddeok during storage were decreased with increasing green tea powder content, and especially those of GT-1.0 and GT-1.5 groups were relatively the lower than others. The “L” value (lightness) of the control group (no additives) was the highest among five groups, and the value was decreased with storage period, and especially GT-0.5 groups had the lowest brightness. The“a”value (reddness) of the control group was the highest, followed by GT-0.5, GT-1.0, GT-1.5, and GT- 2.0 group in order. The“b”value (yellowness) was increased with the increase of green tea powder content. Above results indicated that GT-1.0 group showed the best quality of Seolgiddeok through organoleptic and rheology tests.

• Food Science of Animal Resources
• /
• v.31 no.3
• /
• pp.366-371
• /
• 2011

Viscosity is critically important for bulgogi sauce. However, exposure to irradiation may decrease the rheological properties of bulgogi sauce. This study was conducted to compare the effects of gamma irradiation (0-9 kGy) on viscosity, molecular weight, pH, reducing end level, and water solubility of xanthan gum, guar gum, and locust bean gum as thickening agents/stabilizers in bulgogi sauce. The physicochemical properties of all samples changed (p<0.05) from 3965 to 0 cP (viscosity), from 6048 to 28 kDa (molecular weight), from 5.79 to 4.62 (pH), from 0.13 mg/mL to 1.72 mg/mL (reducing end level), and from 6% to 87% (water solubility) following gamma irradiation. Viscosity after irradiation was most stable (p<0.05) in xanthan gum (from 1249 to 92 cP) compared with guar gum (from 3965 to 0 cP) and locust bean gum (from 1631 to 0 cP). The sensory properties (texture and taste) of bulgogi sauce prepared with xanthan gum (1%, w/w) were highly maintained (about 7.0-5.0) after high-dose irradiation of up to 40 kGy. These results indicate that xanthan gum can be effectively used as a thickening agent/stabilizer in bulgogi sauce, which had low viscosity after irradiation.

• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.128-134
• /
• 2018

With the increase in frequency of typhoons and heavy rains following the climate change, the scale of damage from the calamities in the mountainous areas has been growing larger and larger, which is different from the past. For the case of Korea where 64% of land is consisted of the mountainous areas, establishment of the check dams has been drastically increased after 2000 in order to reduce the damages from the debris flow. However, due to the lack of data on scale, location and kind of check dams established for reducing the damages in debris flow, the measures to prevent damages based on experience and subjective basis have to be relied on. Under this study, the high-precision DEM data was structured by using the terrestrial LiDAR in the Jecheon area where the debris flow damage occurred in July 2009. And, from the numerical models of the debris flow, Kanako-2D that is available to reflect the erosion and deposition action was applied to install the erosion control facilities (water channel, check dam) and analyzed the effect of reducing the debris flow shown in the downstream.After installing the erosion control facilities, most of debris flow moves along the water channel to reduce the area to expand the debris flow, and after installing the check dam, the flow depth and flux of the debris flow were reduced along with the erosion. However, as a result of analyzing the diffusion area, flow depth, erosion and deposition volume of the debris flow generated from the deposition part after modifying the location of the check dams with the damages occurring on private residences and agricultural land located on the upstream area, the highest reduction effect was shown when the check dam is installed in the maximal discharge points.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.4
• /
• pp.634-639
• /
• 2020

Objective: This study was conducted to investigate the effect of heating of foot-and-mouth disease (FMD) vaccine before injection, on the incidence of lesions at the injection site (pork butt), amount of discarded meat, and economical benefit. Methods: In total, 101,086 piglets raised in 30 farms, were vaccinated in the neck with 2 mL of FMD vaccine at 56 d and 84 d of age using a commercial syringe. The heat treatment group (48,511 pigs) was injected with the FMD vaccine after it had been heated in a water bath at 40℃ for 20 min. After slaughter, the incidence of lesions on the pork butt was inspected, and the subsequent amount of discarded meat was recorded. Results: Heat treatment of FMD vaccine reduced the incident rate of lesions on the pork butt (p<0.01). Overall, 17.81% of the pigs in the heat treatment group had lesions, while the incident rate in the control group was 21.70%. The amount of discarded meat per head of total pigs and per head of pigs with lesions were significantly lower in the heat treatment group than the control group (p<0.01). Thus, the proportion of discarded meat to dressed carcass was lower in the heat treatment group (0.249%) compared with the control group (0.338%) (p<0.01). Farms that rear 1,000 sows can gain 1,863,289 KRW (1,600 USD) in one year when they adopt heat treatment of FMD vaccine before injection. Conclusion: Heat treatment of FMD vaccine using simple heat equipment (water bath) can be effective in reducing lesions caused by FMD vaccination and increase the economic benefits in pig farms.

• Fisheries and Aquatic Sciences
• /
• v.20 no.7
• /
• pp.14.1-14.8
• /
• 2017

In this study, marine tunicate Styela clava hydrolysate was produced by an environment friendly and green technology, pressurized hot water hydrolysis (PHWH) at different temperatures ($125-275^{\circ}C$) and pressure 50 bar. A wide range of physico-chemical and bio-functional properties such as color, pH, protein content, total carbohydrate content, reducing sugar content, and radical scavenging activities of the produced hydrolysates were evaluated. The appearance (color) of hydrolysates varied depending on the temperature; hydrolysates obtained at $125-150^{\circ}C$ were lighter, whereas at $175^{\circ}C$ gave reddish-yellow, and $225^{\circ}C$ gave dark brown hydrolysates. The $L^*$ (lightness), $a^*$ (red-green), and $b^*$ (yellow-blue) values of the hydrolysates varied between 35.20 and 50.21, -0.28 and 9.59, and 6.45 and 28.82, respectively. The pH values of S. clava hydrolysates varied from 6.45 ($125^{\circ}C$) to 8.96 ($275^{\circ}C$) and the values were found to be increased as the temperature was increased. The hydrolysis efficiency of S. clava hydrolysate was ranged from 46.05 to 88.67% and the highest value was found at $250^{\circ}C$. The highest protein, total carbohydrate content, and reducing sugar content of the hydrolysates were found 4.52 mg/g bovine, 11.48 mg/g and 2.77 mg/g at 175, and 200 and $200^{\circ}C$, respectively. Hydrolysates obtained at lower temperature showed poor radical scavenging activity and the highest DPPH, ABTS, and FRAP activities were obtained 10.25, 14.06, and 10.91 mg trolox equivalent/g hydrolysate (dry matter basis), respectively. Therefore, S. clava hydrolysate obtained by PHWH at $225-250^{\circ}C$ and 50 bar is recommended for bio-functional food supplement preparation.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.233-240
• /
• 2012

Hybrid SHCC is being researched actively for its excellent performance in controlling macro and micro cracks using macro and micro fibers, respectively. However, a significant autogenous shrinkage of SHCC is expected since it possesses high unit cement volume in its mix proportion, resulting in autogenous shrinkage cracks. Therefore, this study was performed to evaluate mechanical property of shrinkage-reducing type hybrid SHCC mixed together with steel fiber and PE fiber with excellent micro/macro crack controlling performance. In order to evaluate mechanical property of shrinkage-reducing type hybrid SHCC, replacement ratios of 0% and 10% of expansive admixture and water to binder ratios of 0.45, 0.3, and 0.2 were considered as variables. Then, shrinkage, compressive, flexural, and direct tensile tests were performed. The test results showed that mix proportion with W/B 0.3 significantly improved mechanical performance by using 10% replacement of expansive admixture.