• Korean journal of food and cookery science
• /
• v.32 no.1
• /
• pp.58-64
• /
• 2016

The effects of reducing pork hind legs concentrations from 80% to 60% and replacing the pork head meat with up to 20% pork head meat were investigated based on chemical composition, cooking characteristics, physicochemical properties, shear force, and sensory characteristics of hamburger patties. The increasing the pork head levels from 0% to 20% increased the protein content, pH, reduction in diameter, reduction in thickness, and shear force of hamburger patties, but decreased the moisture content, lightness, redness, yellowness, cooking yield, and water holding capacity of hamburger patties. The fat and ash contents of the hamburger patties with different amounts of pork hind legs and pork head showed no significantly different sensory characteristics from the control and all the treatments (p>0.05). The hamburger patties with increasing pork head levels had lower color, flavor, juiciness, and overall acceptability scores, but the overall acceptability of control showed similar trends to T1 and T2. Therefore, replacing pork hind legs with pork head meat in the formulation was successfully similar to control hamburger patties, with best results obtainedon replacing up to 10% pork head meat.

• Culinary science and hospitality research
• /
• v.20 no.4
• /
• pp.27-36
• /
• 2014

We investigated a method to improve antioxidant activities of colored potato extracts by ultra high pressure extraction process. The colored potato was extracted by water at $60^{\circ}C$(WE) and 300 MPa for 15 min (High Pressure Extraction, $HPE_{15}$) and 30 min (High Pressure Extraction, $HPE_{30}$). The extractions yielded by different extraction processes were 1.73(WE), 2.10($HPE_{15}$), and 2.41($HPE_{30}$)%. Total phenolic acid contents of different extraction processes were estimated as 48.21(WE), 50.20($HPE_{15}$) and 51.34($HPE_{30}$) GAL mg/g, respectively. The flavonoids contents of different extraction processes were measured as 13.12(WE), 14.35($HPE_{15}$) and 15.17($HPE_{30}$) RE mg/g, respectively. Generally, for the contents of phenolic acid and flavonoids, the samples from HPE were higher than those from conventional extraction process. $HPE_{30}$ showed 76.21% of DPPH radical scavenging activity (EDA, %) in 1,000 ug/mL. The reducing power of $HPE_{30}$ also showed the high activity as 0.42. In generally, antioxidant activities of colored potato were increased by high pressure extraction process. We could tell that the HPE extracts of colored potato had a higher antioxidant activity than those from conventional water extraction. The results of HPE showed obvious advantages in higher efficiency, shorter extraction time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.3
• /
• pp.471-476
• /
• 2014

We developed a method for improving the antioxidant activities of blueberry (Vaccinium ashei) extracts through an ultra high-pressure extraction process. Blueberries were subjected to water extraction at $60^{\circ}C$ and 300 MPa for 5 min (High Pressure Extraction, HPE5) and 15 min (HPE15). Extraction yields obtained by ultra high-pressure extraction process were 18.48, and 19.89%, respectively. Total polyphenol contents were estimated to be 28.3, and 28.9 mg/g, whereas flavonoid contents were measured as 5.9 and 6.0 mg/g, respectively. Generally, HPE resulted in higher yields than the conventional extraction process. Further, HPE15 showed 53.84% DPPH radical scavenging activity (EDA, %) at $1,000{\mu}g/mL$. Reducing power of HPE15 showed its highest activity of 0.21. In general, antioxidant activities of blueberry increased by HPE. Therefore, HPE of blueberry resulted in higher antioxidant activity than conventional water extraction. These results demonstrate obvious advantages in terms of higher efficiency, shorter extraction time, and lower energy costs.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.2
• /
• pp.47-54
• /
• 2009

The ballast track, the most common type of conventional railroad track in Korea, is deteriorated by abrasion of ballast, it's penetration into roadbed, and rugged surface of roadbed caused by cyclic loading of train. Persistent occurrence of those phenomena lead to insufficient drain capacity, one of major factors in track design, and it increases pore water pressure and decreases of shear strength under rainfall condition leading to unstable roadbed. In this study, cylindrical model tests are executed for 3 types of geotextile applying cyclic loading in order to observe the characteristics of displacement and bearing capacity of geotextile, and undrained condition has been applied for 0 day, 3 days and 7 days to each geotextiles. The results showed that there was about 1% difference at the final displacement rates between reinforced soils and nature soils and the displacement of the ground surface increases along with the degrees of the saturation. And in case that water contents exceeds the threshold, it is also apparent that weight and tensile strength of geotextile influences displacement of the ground surface. And the larger weight of geotextile is, the smaller plastic displacement. It is evaluated that non-woven fabric comes into effect on reducing the bearing capacity but, the weight of geotextile has little influence on it.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.6
• /
• pp.977-985
• /
• 2002

In order to improve the quality of traditional kochujang, submaterials like sea tangle and chitosan were added to kochujang and their effects on microbial characteristics, enzyme activities and physicochemical characteristics were investigated for 24 weeks of fermentation. The activities of $\alpha$,$\beta$-amylase in kochujmg were higher in sea tangle added at 2% level and chitosan added at 0.1% level. However, acidic protease activity decreased as the ratio of submaterials increased. Viable cells of yeasts in the kochujang increased rapidly for 4~8 weeks of fermentation, and bacterial counts decreased in submaterials added groups. Moisture contents of kochujang increased until 12 weeks of fermentation, but water activity decreased. As the ratio of sea tangle increased, water activity decreased. Consistency of kochujang increased after middle of fermentation, and they increased remarkably by addition of sea tangle. The degree of increase in total color difference ($\Delta$E) of sea tangle added group was lowest. The titratable acidity of kochujang decreased after 4 weeks, and they changed a little by addition of chitosan. Amino nitrogen contents of kochujang increased as mixing ratio of submaterials increased in the late period of aging. Ammonia nitrogen contents was lower in chitosan added kochujang at 24 week of fermentation. Reducing sugar contents of kochujang increased rapidly for 4~8 weeks of fermentation, and they increased as the ratio of chitosan increased. Ethanol contents of kochujang increased until 12~16 weeks of fermentation, with lower values in sea tangle added group. After 24 weeks of fermentation, the result of sensory evaluation showed that 0.1% chitosan added kochujang were more acceptable than sea tangle added kochujang in the taste, color and overall acceptability.all acceptability.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.494-501
• /
• 2013

The convolution code(CC) of code rate 1/2 as a forward error correction (FEC) in Quadrature Phase Shift Keying (QPSK) is applied to decrease bit error rate (BER) by background noise and multipath in shallow water acoustic channel. Ratio of transmitting signal bandwidth to channel coherence bandwidth is defined as frequency selectivity index. BER and bit energy-to-noise ratio gain of transmitted signal according to frequency selectivity index are evaluated. In the results of indoor water tank experiment, BER is well matched theoretical results at frequency selectivity index less than about 1.0. And bit energy-to-noise ratio gain is also matched theoretical value of 5 dB. BER is effectively decreased at frequency selective multipath channel with frequency selectivity index higher than 1.0. But bit energy-to-noise ratio greater than a certain size in terms of CC weaving is effective in reducing bit errors. In the results, the defined frequency selectivity index in this study could be applied to evaluate a performance of CC in multipath channel. Also it could effectively reduced BER in a low speed underwater acoustic communication system without an equalizer.

• Journal of Bio-Environment Control
• /
• v.13 no.3
• /
• pp.135-142
• /
• 2004

The objective of this study was carried out to determine which method is effective for improving seed germination in carrot and onion among osmotic or solid matrix priming. Seeds were osmotic primed with -0.5 MPa polyethylene glycol 8000 (PEG) solution and solid matrix primed with Micro Cel E (seed, Micro Cel E, and water mixed with the ratio of 4.0：2.0：8.0 by weight for carrot, and the ratio of 4.0：1.2：5.0 for onion at $20^{\circ}C$ for 4 days). Seeds were rapidly absorbed water after osmotic priming and solid matrix priming treatment. The moisture content of solid matrix primed seeds was lower than that of osmotic primed seeds in carrot and onion. Osmotic priming and solid matrix priming did not influenced on increasing of percent germination, but $T_{50}$ of treated seeds was shorter than those of untreated seeds at four temperature regimes. The effects of osmotic or solid matrix priming in reducing the $T_{50}$ was greater when the seeds were germinated at $15^{\circ}C$ than at $25^{\circ}C$ and $30^{\circ}C$ temperature. Solid matrix primed seeds germinated faster than osmotic primed seeds at all temperature in both carrot and onion. After priming, surface-dried seeds germinated faster than dried-back seeds in carrot and onion. Emergence speed of carrot and onion seeds was faster than untreated seeds by osmotic priming or SMP treatment although the final emergence percentage was not significantly influenced. On the other hand, early growth was not significantly influenced by osmotic priming or SMP treatment of carrot and onion seeds.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.6
• /
• pp.475-482
• /
• 2014

This study was indicated to enhance the anti-inflammation activities by the fermentation of the fruits of Aronia melanocarpa (Michx.) Elliott. The extracts by 70% ethanol (EE) showed better biological activities than those by hot water (WE) from campared result of the effect of extraction solvents. Then, the extract from 70% ethanol extraction was further fermented by lactic acid, denoted as FEE. For antioxidant activities, the FEE had showed the highest value as 0.832 of reducing powder, in comparison with those of EE and WE. Cytotoxicity of the water extraction (WE) was measured for 12.06% in addition of $1.0mg/m{\ell}$ of FEE. For anti-inflammation activities, NO production from the macrophage, RAW 264.7 was observed as $7.24{\mu}M$ and $8.52{\mu}M$ from FEE and EE, respectively. Prostaglandin $E_2$ ($PGE_2$) production from human fibroblast cell, CCD-986sk, was also estimated for $152pg/m{\ell}$ in addition of $1.0mg/m{\ell}$ of the FEE. The lowest production of both IL-6 and TNF-${\alpha}$ were $3.5pg/m{\ell}$ and $865.5pg/m{\ell}$, respectively in addition of $1.0mg/m{\ell}$ of the FEE, whereas $74.5pg/m{\ell}$ and $982.4pg/m{\ell}$ in treated with same concenrations of the EE. It was also found that the FEE was higher amounts than other extracts through HPLC analysis of the anthocyanins. These results strongly indicate that fermentation process of the lactic acid could enhance anti-inflammation activities of extracts by increasing the amounts of the anthocyanins, especially cyanidin-galactoside. Our results suggest that the application of the fermentation process for other medicinal herbs can be improved their biological activities.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.2
• /
• pp.203-210
• /
• 2012

Recently, the interest and demand for large-scale buildings and skyscrapers have been on the rise, and the performance of concrete is an area of high priority. Securing 'mass concrete and high strength concrete' is very important as a key construction technology. For high strength concrete, the high heat of hydration takes place inside the concrete because of the vitality of hydration in cement due to the large amount of powder, and leads to problems such as an increase of thermal stress due to the temperature difference with the outside, which results in cracks and slump loss. For this reason, measures to solve these problems are needed. This study aims to reduce the hydration heat of high strength concrete to control the hydration heat of mass concrete and high strength concrete, by replacing the type of admixture, The purpose of this study is to control the hydration heat of high strength concrete and mass concrete. Our idea for this purpose is to apply not only the types and contents of admixture but also incorporation mixing water to ice-flake. As a result of the test, the use of blast furnace slag and fly ash as admixture, and the use of ice-flake as mixing water can improve the liquidity of concrete and reduce slump loss. Significantly dropping the maximum temperature will contribute greatly to reducing cracks due to hydration heat in mass concrete and high strength concrete, and improve quality.

• Journal of Conservation Science
• /
• v.29 no.2
• /
• pp.187-196
• /
• 2013

This study is on the corrosion of iron objects caused by sulfides in undersea environment. The corrosion state of objects in seawater and their damage state after underwater and left in highly humid air were studied. The samples of this study were four iron objects which had been taken out from undersea mud layer located in Taean Mado, Chungcheongnamdo. SEM-EDS and XRD analyse on the objects to check whether they have sulfides or not. The result of analysis suggested that the major component of corrosion product generated in undersea deposit soil is sulfur(S) and iron sulfide(FeS) is formed as sulfide. However, there was no clear corrosion on the surface of objects which was exposed to sea water because of the impact of concretion which covered the surface. In order to check the damage status of iron objects after they had been taken out of sea water, exposure tests in high humidity environment and dehumidified environment were done on the corrosion products. The result of the test suggested that the oxidization of iron sulfide corrosion product makes iron sulfate ($FeSO_4$) and sulfuric acid ($H_2SO_4$) and they can cause secondary corrosion of iron objects. Therefore, it is believed that the iron sulfide corrosion product of iron objects taken out from underwater environment should be removed by all means and the keeping environment of the iron objects should also maintain dehumidified state.