• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.508-514
• /
• 2017

Water-bloom and red tide due to eutrophication have been overgrown and have caused various environmental problems. Recently, however, research on bid-diesel that can utilize algae as an energy source has been actively carried out. In particular, many studies variously have been conducted to utilize algal photosynthesis oxygen as a supply method for reducing the energy by an air blower in MWTP. In this study, a lab scale algae-nitrification reactor was operated to replace the oxygen required for nitrogen removal and the operation period was largely divided into three sections. In the first section, ammonia nitrogen removal efficiency was 24 ~ 38% according to the MLSS (Mixed Liquer Suspended Solid) concentration. In the second section, ammonia nitrogen removal efficiency was 38 ~ 50% according to the micro-algae concentration and in the last section ammonia nitrogen removal efficiency was 61 ~ 80% according to HRT (Hydraulic Retention Time). As a result, as the MLSS decreased and algae biomass increased, the ammonia nitrogen removal efficiency tended to increase, but the effect of Algae biomass was greater than that of MLSS.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.spc
• /
• pp.47-50
• /
• 2009

Nutrient losses, especially nitrogen and phosphorus, in agricultural runoff can contaminate surface and ground water, leading to eutrophication. Thus, erosion control is crucial to minimizing nutrient losses from agricultural land. Assessments of various erosion control practices were carried out under various cropping system, soil management practices, and slope conditions by means of a lysimeter study and under artificial rainfall. Soil and nutrient losses were monitored in a small agricultural field to evaluate the soil conservation practices. Nutrient losses occur in runoff and leachate (dissolved nutrient) and in sediments (particulate nutrient). Dissolved nitrates accounted for the majority (about 90%) of nitrate transport within the soil. Particulate phosphate in sediments represented the majority (60% to 67%) of phosphate transport. Recently, engineering and agronomic erosion-control practices haver been used to reduce erosion problems in fields on slopes. These practices reduced soil loss, runoff, and nutrient loss to 1/6, 1/2,and 1/3 their original levels, respectively. Bioavailable particulate phosphate in sediments represents a variable but longterm source of phosphate for algae. Dissolved nitrate and phosphate are immediately available for algal uptake, so reducing fluxes of these nutrients should also reduce the risk of eutrophication.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.2
• /
• pp.87-92
• /
• 2001

As well as arising the concern about pesticides known as a Carcinogenic or endocrine disorder substrates, magnitude was increased of reducing pesticides in soil or water. In this work, removals of residual pesticides on surface of solid phase were attempted by the photooxidation process with hydrogen peroxide. The optimum conditions for the removals of benomyl (carbamatic pesticide) chlorothalonil (Organochoric pesticide) were 350nm UV wavelegth and 20% (v/v) hydrogen peroxide solution as oxidant. Removals are negligible when UV radiation or the supply of hydrogen peroxide are solely applied on the target compoounds. Removal rates of the pesticides are accelerated by UV radiation with hydrogen addition. After 20 min of the treatment, about $2{\mu}g/cm^2$ of benomyl and $1,88{\mu}g/cm^2$ of chlorothalonil were disappeared on the surface of the solid phase.

• Membrane Journal
• /
• v.13 no.4
• /
• pp.257-267
• /
• 2003

For the treatment of reactive phenolic resin waste, a simulation model of pervaporative dehydration process has been developed through hollow fiber membrane module. Some of basic parameters were determined directly from dehydration of the waste liquid through a flat sheet membrane to get realistic values. The simulation model was verified by comparing the simulated values with experimental data obtained from hollow fiber membrane module. Hollow fiber membranes with active layer coated on inside fiber were used, and feed flew through inside hollow fiber. Feed flow rate affected membrane performances and reaction by providing a corresponding temperature distribution of feed along with fiber length. Feed temperature is also a crucial factor to determine dehydration and reaction behavior by two competing ways; increasing temperature increases permeation rate as well as water formation rate. Once the permeate pressure is well below the saturated vapor pressure of feed, permeate pressure had a slightly negative effect on permeation performance by slightly reducing driving force. As the pressure approached the vapor pressure of feed, dehydration performances declined considerably due to the activity ratio of feed and permeate.

• Clean Technology
• /
• v.26 no.1
• /
• pp.79-87
• /
• 2020

The bio-oil produced from the fast pyrolysis of lignocellulosic biomass contains a high amount of oxygenates, causing variation in the properties of bio-oil, such as instability, high acidity, and low heating value, reducing the quality of the bio-oil. Consequently, an upgrading process should be recommended ensuring that these bio-oils are widely used as fuel sources. Catalytic fast pyrolysis has attracted a great deal of attention as a promising method for producing upgraded bio-oil from biomass feedstock. In this study, the fast pyrolysis of tulip tree was performed in a bubbling fluidized-bed reactor under different reaction temperatures, with and without catalysts, to investigate the effects of pyrolysis temperature and catalysts on product yield and bio-oil quality. The system used silica sand, ferric oxides (Fe₂O₃ and Fe₃O₄), and H-ZSM-5 as the fluidized-bed material and nitrogen as the fluidizing medium. The liquid yield reached the highest value of 49.96 wt% at 450 ℃, using Fe₂O₃ catalyst, compared to 48.45 wt% for H-ZSM-5, 47.57 wt% for Fe₃O₄ and 49.03 wt% with sand. Catalysts rejected oxygen mostly as water and produced a lower amount of CO and CO₂, but a higher amount of H₂ and hydrocarbon gases. The catalytic fast pyrolysis showed a high ratio of H₂/CO than sand as a bed material.

• Korean Journal of Agricultural Science
• /
• v.16 no.1
• /
• pp.71-83
• /
• 1989

The purpose of this research are to forecast the demand and supply of milk in Korea, and to obtain information for attitudes affecting milk consumption, which is necessary to make a plan for increasing milk consumption in Korea. The estimation of the milk demand and production was made by the multiplicative decomposition method and the statistical function. Data on consumer were collected from 737 students who were attending primary school, middle school and university in Daejeon during the period of July 11 to July 21, 1988. The results obtained are as follows; 1. The prediction results showed that the production for milk will over supply 21,900 tons in 1,990, 70,800 tons in 1,995 by the multiplicative decomposition method and 45,400 tons in 1990, -51,500 tons in 1995 by the statistical function. 2. It was found that almost all the students awared milk as essential food-stuff of common food stuff for the Koreans. 3. Quite a few students were apt to believe that milk processors added water into fluid milk. 4. Most students showed obtaining information about the nutritional value of milk by school education and advertising of TV, Radio, and Printed media. 5. However, it was found that the advertising by TV, Radio, and Printed media did hardly give to consumers influences on the choice of a particular milk brand. Accordingly, the conclusions are as follows; 1. Need to provide consumers with well planned education programs on the nutritional value of milk. 2. Heavy brand advertising for fluid milk may mislead the understanding of consumer, since city milk is not much differentiated in Korea. Therefore the milk processors should put more efforts in generic milk promotion by reducing brand advertizement. 3. The milk processors should provide major portion of financing for generic milk promotion program.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.923-926
• /
• 2008

Currently more high flow and high performance concrete is used for construction of buildings in the world. However, when high flow and high performance concrete put high performance water reducing agent in quantity to improve flow, it has a negative effect on concrete structures since segregation arises from it though flow will be improved. There are naked-eye observation, coarse aggregate washing test, L Flow test for permeation among reinforcing rods and measurement of viscosity to judge concrete segregation resistance. However, it is difficult to apply them to practical affairs since they are very complicated and troublesome. Therefore, the study analyzed EIS dividing slump flow value into slump value, how to valuate concrete segregation resistance more easily, on the basis of the existing reference materials to propose EIS. As the results, in the event of high flow concrete, it is desirable that EIS value is prescribed to be less than 2.5 at the time of managing segregation. Also, at the time of prescribing EIS with performance, it is judged that it is desirable to manage segregation as less than 2.2 (Grade 1), 2.2$\sim$2.4 (Grade 2) and more than 2.6 (Grade 3).

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.605-608
• /
• 2008

This study investigated fundamental properties corresponding to mixtures for the high strength, and their properties of spalling prevention after a fire test. The results were summarized as following. For the flowability of using mixtures for the high strength, the target flow was satisfied with a small quantity of high performance reducing water agent to compare with silica fume. For the compressive strength in the case of using mixtures for the high strength, it was higher to compare with silica fume at 7 days, so it was proved that using mixtures for the high strength was profitable to prevent early frost damage. The compressive strength at the 28 days of silica fume and mixtures for the high strength were similar. There was no reduced tendency at the compressive strength according fiber contents, so it found out that the bonding strength between the fiber and concrete was hardly effective. For the spalling properties, the specimens without fibers were destroyed, however using over 0.05% of NY and PP fibers was effective to prevent spalling on the high strength concrete.

• KIEAE Journal
• /
• v.14 no.2
• /
• pp.11-19
• /
• 2014

Building energy consumption takes up almost 25% of the total energy consumption. Therefore, diversified ways, such as improving wall and window insulation, have been considered to reduce building energy consumption. Recently, green roof system has been explored as an effective alternative for dealing with reducing heating and cooling energy, thermal island effect and improving water quality. However, recent studies regarding a green roof system have only focused on building energy reduction without considering the applied usage, location, and story of the green roof system. Therefore, this study pays attention to the heating and cooling energy in relation to the applied usage, location, and story of a green roof system for investigating its impact on energy reduction. The result of simulations show that the reduction in heating energy consumption is higher when applied to Cherwon-gun province which has a continental climate condition, compared to the city of Busan that is distinguished by its warm climate. Cooling energy saving turns out to be higher when the green roof system is applied to Busan in comparison with Cherwon. As for the applied usage or function of the building, residential space acquires the highest heating and cooling energy saving effect rather than commerce, educational or office space because of HVAC's running time based on usage. When it comes to the story of the green roof, both heating and cooling energy saving become the highest when the green roof is applied to single-storied buildings. The reason is that single story building is affected by the ground largely. Generally, the variations of heating energy consumption are larger than the cooling energy consumption. The outcome of the simulations, when a green roof system is applied, indicates that the energy consumption reduction rate is dynamically responding to the applied usage, location, and story. Therefore, these factors should be counted closely for maximizing the reduction of energy consumption through green roof systems.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1805-1812
• /
• 2012

The effects of red-potato on the physicochemical properties of kochujang were investigated during fermentation. The number of yeast and aerobic bacteria in kochujang increased up to 4 weeks of fermentation, then the yeast number slowly decreased. Amylase activities also increased after 2~4 weeks of fermentation with the addition of red-potato. The Hunter L-value of kochujang decreased sharply and the a-value increased through the addition of starch syrup, causing major changes in total color difference as the ratio of red-potato increased. There was a direct correlation between the amount of red-potato with water activity and titratable acidity. The oxidation-reduction potential of kochujang decreased sharply after 12 weeks of fermentation, and was lowered with the addition of red-potato. As the ratio of red-potato increased, reducing sugars and ethanol contents of kochujang increased in the later stage of fermentation, while the amino-type nitrogen content was lower. Sensory results showed that a final percentage of 2% red-potato in kochujang was optimal for taste and overall acceptability.