• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.241-248
• /
• 2003

In August 2002, side wall of OO tunnel, at the Bonghwa, Kungbuk province, Korea, was collapsed by abruptly applied heavy soil and water pressure to side wall from a inclined shaft when there was a heavy rain. These days, Inclined shaft is used for the purpose of reducing construction time, using ventilation system, using the out of carrying equipment and mucking when we construct tunnel in the world. Recently constructed tunnel has the source of inclined shafts, but the more time elapse, we lose the source of the inclined shaft such as exact position, condition, and the fact that whether inclined shaft is exist or not. Therefore, this study inspected the interior's appearance, analyzed structure to evaluate the reason of collapsing side wall and this study also performed the repairing work. Finally, we show improving maintenance method to prevent that similar accident that might be happened.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.3
• /
• pp.108-114
• /
• 1997

The skin permeation study has two meanings in cosmetics. One is how to promote the skin permeation of active meterials for improving their bioavailabilities and the other is how to decrease it of irritants for reducing their skin side effects. In this study, we selected methyl paraben, one of the preservatives, as a model irritant and tried to reduce the skin irritation by the decrease of skin permeation. Furthermore, the relationship between skin permeation and skin primary irritation was discussed. For in vitro skin permeation experiments, Franz type diffusion cells and the excised skin of female hairless mouse from 8 weeks old were used. The donor compartment was charged with oil only or O/W emulsion containing 0.3% MP. We selected 19 oils, including esters, triglycerides, plant oils, hydrocarbons, and alchols, which are broadly used in cosmetics. We evaluated with female guinea pig. The skin permeahility of MP from the oils showed following order: ester oils > triglycerides > plant oils > hydrocarbons > alcohols. We considered that this result was based on the different effect of each oil on the barrier function of stratum corneum. In O/W emulsion containing each oil, the skin permeability of MP decreased as the oil/water partition coefficient of MP increased. The skin primary irritation increased as the skin permeability of MP increased. In conclusion, we suggest that the skin irritation could be reduced by the decrease of skin permeability of MP, which may be obtained by the good selection of oils in cosmetic preparations.

• Journal of Hydrogen and New Energy
• /
• v.22 no.3
• /
• pp.340-348
• /
• 2011

Effects of various inorganic-metal oxide (Zr, Zn, Si, Al and Ca as promoters and stabilizers) additive on the reduction rate of iron oxide and the composition of forming hydrogen using the steam-iron cycle operation was investigated. The reduction rate of redox agent with additive was determined from weight change by TGA. The changes of weight loss and reduction rate according to redox agent with various additive affected the hydrogen purity and cycle stability of the process. The cyclic micro reactor showed that hydrogen purity exceeding 95% could be obtained by the water splitting with Si/Fe, Zn/Fe, Zr/Fe redox agents. The redox agents with these elements had an affect on redox cycle stability as a good stabilizer for forming hydrogen by the steam-iron process.

• Journal of Hydrogen and New Energy
• /
• v.6 no.2
• /
• pp.75-84
• /
• 1995

SPE-composites which was prepared with impregnation-reduction method for hydroen production were investigated with morphological and electrochemical analysis. As Pt reagent's concentration increased, Pt loadings increased. However, reductant's concentration had a little effect on Pt loadings. By the morphological analysis, it was found that Pt was deposited inside of SPE. Furthermore, with electrochemical analysis, we found that Pt loading, electricity, roughness factor and active surface area were $2.05mg/cm^2$, 14.20 mC, 21.55, $10.51cm^2/mg$ respectively at reducing agent concentration 0.05 mol/L. Therefore, we found the deposited Pt inside of SPE would give an effect on electrical characteristics of SPE-composites.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.5
• /
• pp.19-26
• /
• 2014

The cross flow turbine attracts more and more attention for its relatively wide operating range and simple structure. In this study, a novel type of micro cross flow turbine is developed for application to a step in an irrigational channel. The head of the turbine is only H=4.3m and the turbine inlet channel is open ducted type, which has barely been studied. The efficiency of the turbine with inlet open duct channel is relatively low. Therefore, a guide nozzle on the turbine inlet is attached to improve the performance of the turbine. The guide nozzle shapes are investigated to find the best shape for the turbine. The guide nozzle plays an important role on directing flow at the runner entry, and it also decreases the negative torque loss by reducing the pressure difference in Region 1. There is 12.5% of efficiency improvement by attaching a well shaped guide nozzle on the turbine inlet.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.3
• /
• pp.175-183
• /
• 2010

Windows are widely used for natural ventilation of the various buildings. Especially high level windows as a part of industrial ventilation systems, play a crucial role in natural ventilation. Compared to mechanical ventilation system, natural ventilation has the advantage of lower installation and operating costs. In general, high level windows for industrial buildings have three types; louver type, 45$^{\circ}$ open type and 90$^{\circ}$ open type. Based on previous studies, it was found that the louver type and 45$^{\circ}$ open type are very effective in reducing rainwater penetration, but they did not have enough ventilation efficiencies. Preliminary tests were performed with the various types of windows. It was found that a 90$^{\circ}$ open double layer type window was the best among those which tested in our preliminary tests. Simulated rain was used to estimate the amount of rain penetrated through windows and to observe the paths of rain penetration. Various 90$^{\circ}$ open windows were tested to find the windows with minimum rain penetration and maximum ventilation efficiency.

• Environmental Engineering Research
• /
• v.15 no.3
• /
• pp.167-172
• /
• 2010

The effects of low impact development (LID) techniques, such as green roofs and porous pavements, on the runoff and pollutant load from an apartment complex were simulated using the Site Evaluation Tool (SET). The study site was the Olympic Village, a preexisting apartment complex in Seoul, South Korea, which has a high percentage of impervious surfaces (approximately 72% of the total area). Using the SET, the effects of replacing parking lots, sidewalks and driveways (37.5% of the total area) having porous pavements and rooftops (14.5% of the total area) with green roofs were simulated. The simulation results indicated that LID techniques reduced the surface runoff, and peak flow and pollutant load, and increased the evapotranspiration and soil infiltration of precipitation. Per unit area, the green roofs were better than the porous pavements at reducing the surface runoff and pollutant loads, while the porous pavements were better than green roofs at enhancing the infiltration to soil. This study showed that LID methods can be useful for urban stormwater management and that the SET is a useful tool for evaluating the effects of LID on urban hydrology and pollutant loads from various land covers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.257-260
• /
• 2003

A total of 135 F2 finishing pigs (65 barrows and 69 gilts) from resource population (Large White${\times}$Meishan) were slaughtered at about 87.8 kg BW. Contents of inosine acid (IMP) and carnine (HR) in muscle were assayed by HLPC and genetic parameters for IMP content and HR content were estimated using full sibs model. There was significant sex effect on IMP content(p<0.05), $3.561{\pm}0.077mg/g$ for gilt and $3.287{\pm}0.085mg/g$ for barrow. Heritability estimates for IMP and HR content were 0.127 and 0.357, respectively. The phenotypic correlation between IMP content and HR was 0.335, pH (A) 0.024, water lose rate (WLR) -0.069, intramuscular fat (IMF) -0.214, average marbling score (MARB) -0.143, average backfat measurements (AVBF) -0.084 and average color value (CV) -0.156, respectively. The result indicated that inosine acid content in meat might be retained or slightly improved by reducing backfat depth in pig breeding.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1869-1874
• /
• 2010

By reducing PVP with $H_2NOH$.HCl and NaOH 2:2:1 mass ratios in aqueous ethanol, poly-N-vinyl pyrrolidone oxime [PVPO] was prepared with 92% yield. Applying the sol-gel concept, orthosilicic acid [OSA] was made by hydrolyzing TEOS with ethanol in 1:0.5 molar ratios using 1 N KOH aqueous solution as a catalyst. The OSA + PVPO + $_L$-Valine ($\alpha$-amino acid) were mixed with pure ethanolic medium in 1:2:2 mass ratios and refluxed at $78^{\circ}C$ and 6 pH for 6.5 h. A white residue of poly-N-vinyl pyrrolidone oximo-L-valyl-siliconate [POVS] appeared after 5 h. The heating of reaction mixture was stopped and the contents were brought to NTP. The residue formation of POVS was intensified with lowering a temperature and completely solidified within 5 h, was filtered using a vacuum pump with Whatmann filter paper no. 42. The residue of POVS was washed several times with 20% aqueous cold ethanolic solution and dried in vacuum chamber at $25^{\circ}C$ for 24 h. The MP was noted above $350^{\circ}C$. Structural and internal morphology were analyzed with IR and $^1H$-NMR, and SEM respectively. A drug loading and transporting ability of the POVS in water and at pH = 5 and 8 was determined chromatographically.

• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.3-10
• /
• 2008

This paper is to investigate the characteristics of debris flow landslides in Gangwon Province through literature review, data collection and analyses and site investigation. As results of data analyses about landslides occurred currently in this province, the landslide in the form of debris flow is found to be 55 %. Therefore major loss and costs are caused by discharge of soil and rock fragments from landslide. From results of analyzing the geometrical characteristics of landslide, length of most of landslide is less than 200 m, their width is in the range of 10 - 40 m, most of them are know to be occurred in lower elevation than 400 m. Slope angle is in the range of 25 - 35 degrees. Comparing the period of rainfall intensity with the time of landslide being occurred, occurrence of landslide is quite related to duration of a heavy rainfall. For measures of controlling water flow discharge and debris flow, considering geological and topographical ground conditions, appropriate selection and building check dam, erosion control dam and ring net is very beneficial for reducing the loss and costs caused by the landslide of debris flow.