• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.745-749
• /
• 1994

Animal experiments were conducted to confirm the suppressive effect of green tea on the intestinal absorption and tissue accumulation of toxic heavy metals in rats. When drinking water contaminated with 500 and 5000 times level of water quality standard for lead or cadmium was administrated to rats for 3 weeks, feed intake and body weight gain were not significantly differrent among all groups except for high cadmium group. In the relative weights of target organs, kidney and femur showed a significant difference by heavy metal administration and green tea did not influence on the weights. Green tea showed a suppressing effect on the accumulation of heavy metals in target organs, in which the reducing effect in femur was $25{\sim}45%$ for lead, and 42% for cadmium. As calcium content of femur decreased by heavy metal administration was increased in green tea group, it was concluded that heavy metal accumulation in femur was interrupted by tea beverage.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.27 no.5
• /
• pp.631-636
• /
• 2013

This study was to evaluate the antioxidant properties of the leaf extracts of Diospyros lotus (DLE) on the chemical-induced free radical and rat red blood cell (RBC) oxidative damage in vitro. DLE were prepared by extracting with water. DLE showed the high antioxidant activities on the scavenging of 2,2-diphenyl-1-picrylhydrazyl and 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid)-induced radicals. An antioxidant activities of DLE was similar to the reference antioxidant butylated hydroxytoluene (BHT) and (${\pm}$)6-hydroxy-2,5,7,8-tetramethylchromane-2-carboxylic acid (Trolox). Reducing power of $1,000{\mu}g/mL$ DLE also was similar to the vitamin C. In RBC, oxidative hemolysis induced by the aqueous peroxyl radical generator (2,2'-Azobis (2-methylpropionamidine) dihydrochloride (AAPH)) were significantly suppressed by DLE in a dose-dependent manner. Furthermore, DLE prevented the depletion of cytosolic antioxidant glutathione in RBC damaged with AAPH. These results suggest that DLE may has value as natural product with its high quality antioxidant properties against oxidative stress.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.425-431
• /
• 2014

Most fields in highland areas are covered with rye or hairy vetch for conservation during a fallow. However, using cover crops needs an effort to sow, and this makes top soil more vulnerable to loss due to surface disturbances. The aims of this study were to develop an automatic seeding-regulator device using a low-price, extensive-use GPS sensors and a DC motors and to evaluate a working efficiency of it after adaptation to partial tillage machine for reducing seeding effort. The amount of runoff water and soil loss was evaluated with partial tillage and simultaneous-seeding after harvesting soybean, in 17% slope lysimeters. In results, the seeding amount with the machine speed was stable between $0.5{\sim}0.8m\;s^{-1}$ of working sections. The automatic control device of seeding-rate could be enough to solve the slip problems of power selecting supply system or five four-wheel drive device. In partial tillage and simultaneous seeding, runoff water was 11.6% ($1.8m^3ha^{-1}$) of the scatter-seeding control ($15.5m^3ha^{-1}$) and soil loss was 13.2% ($7kg\;ha^{-1}$) of the scatter-seeding control ($53kg\;ha^{-1}$). These results suggest that partial tillage and simultaneous-seeding methods are very effective in decreasing work effort and soil loss of sloped land.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.3
• /
• pp.331-339
• /
• 2007

The purpose of this study was to investigate the biodegradability and performance of organic removal and methane production rate when treating piggery wastewater using a pilot scale two-phase anaerobic system operated up to a volumetric rate of $10m^3/day$. The pilot scale two-phase anaerobic process is consisted of a continuous-flow stirred-tank reactor (CFSTR) for the acidification phase and an Upflow Anaerobic Sludge Blanket reactor (UASB) for the methanogenesis. The acidogenic reactor played key roles in reducing the periodically applied shock-loading and in the acidification of the influent organics. The acidogenic CFSTR was operated at organic loading rates (OLR) between 1.8 and $14.4kgCOD/m^3{\cdot}day$, and the UASB reactor was operated between 0.5 and $5.6kgCOD/m^3{\cdot}day$. A stable maximum biogas production rate was $81m^3/day$ and the methane conversion rate of the organic matter varied from 0.30 to $0.42L\;CH_4/g\;COD_{removed}$(0.40) at hydraulic retention time (HRT) above 3.5days. The methane contents ranged from 73 to 82% during the experimental period. It is known that most of the removed organic matter was converted to methane gas, and the produced biogas might be high quality for its subsequent use.

• Journal of Korean Society of Rural Planning
• /
• v.12 no.2 s.31
• /
• pp.49-56
• /
• 2006

The application of domestic wastewater on rice paddies results in the accumulation of sodium(Na$^+$) to the soil. Excessive concentration of sodium may cause the deterioration of the physical characteristics of the soil, change in the osmosis of the soil, destruction of soil aggregates as well as ion toxicity due to sodium accumulation. Using domestic wastewater as irrigation water should be preceded by measures to prevent or control the soil salinization caused by sodium. Agricultural reuse of domestic wastewater were found not to cause serious problems with food safety due to heavy metals. However, pre-treatment using ultraviolet or ozone is recommended to reduce the number of bacteria and gem and for public health reasons. Using domestic wastewater has shown that reducing the standard application of chemical fertilizers by as much as 50% reduced the harvesting index by only 10%. This study has shown that it is feasible to reuse domestic wastewater on rice paddies. In order to facilitate the application, it is deemed necessary to establish wastewater treatment technologies in the future, to review criteria for recycling domestic wastewater for agricultural purposes such as conditions of soil and cropping system and to resolve conflicts with farmers and public health issues.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.695-704
• /
• 2016

Rubber deposited during aircraft landing is known as the main cause of reducing surface friction force on wet surfaces. Thus, rubber deposits are removed at regular intervals for sae airplane landing. The high-pressure waterblast method, widely used for the removal of rubber deposits, is regarded as the main cause for the loss of surface material because in this method, water hits the surface directly at a high pressure. In this study, a rubber removal primer is developed to reduce surface damage by lowering the pressure of waterblast relatively during the removal of rubber deposits such that the deposits are removed efficiently even with a lower water pressure. To achieve this, basic materials appropriate for the primer were selected and their performance, penetration rate, and site applicability were evaluated. Based on the evaluations, the proportion of additive required for improving the performance of the basic materials was first determined. Then, the optimum mix ratio was derived through the evaluation of the effect on pavements, and the development of the rubber removal primer was completed.

• Korean Journal Plant Pathology
• /
• v.14 no.4
• /
• pp.325-330
• /
• 1998

On the basis of the fact that the pycnidiospore of Botryosphaeria dothidea, the causal fungus of apple white rot is a typical water borne spore, a method for quantitative analysis of pycnidiospore dispersal from the warts produced on the diseased apple tree stem was developed. The warts on which cracks developed either on or around them were cut off at the base, and shaked in the water for 4hours at 2$0^{\circ}C$, in which condition the maximum number of spores were released. The volume of shaking solution was calculated as 1 ml per one wart. At the end of shaking, Trio, a household detergent was added to the shaking solution to the concentration of 0.1%, and shaked for additional 10 minutes at 35$^{\circ}C$ to take off the spores attached on the glass ware. One milliliter of the spore suspension thus prepared were passed through transparent membrane filter (pore size : 3.0 ${\mu}{\textrm}{m}$), and the spores attached on the filter were counted under a microscope ($\times$200) after staining them with lactophenol supplemented with aniline blue. The results thus obtained were statistically consistent when at least 30 warts were used simultaneously in single shaking. This method can be applicable in the elucidation of ecology of sporulation and spore dispersal, and also in the screening of the sporulation inhibitor which can be used in the control of the disease by reducing the inoculum density.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.173.1-173.1
• /
• 2011

The high fuel flexibility of gas turbine power system has boosted their use in a wide variety of applications. Recently, the demand for biogas generated from the digestion of organic wastes and sewage waste water as a fuel for gas turbines has increased. We investigated the performance of high pressure biogas compression system and operating conditions for supplying biogas. The total flow per minute of biogas from food waste water digestion tank is $54Nm^3$. The main type of biogas compression system is the reciprocating system and screw type system. The target of biogas mechanical data is the as belows; inlet pressure 0.045bar, supplying biogas temperature is $30{\sim}60^{\circ}C$, and final pressure is above the 25 bar. Also, inlet conditions of biogas consist of CH4 48.5%~83%, $H_2S$ Max. 500ppm, $NH_3$ Max. 1,500ppm and Siloxane 2.7~4.6ppm. The boosting Blower system raises a pressure from 0.045bar to 1bar before main compressor. The main system lay out of reciprocating consisits of compressor driver, filter, cooling system, blowdown vessel, control system and ESD(Emergency Shut Down) system. And an enclosure package needs to be installed for reducing noise up to 75dB. The system driver is the electronic motor of explosion proof type. Forthe compressor system reliable operation, the cleaning system something like particulate filter needs to be set up in the inlet of compressor and Coalescing Filter in the outlet of compressor. Particulate Filter has to be removed above $10{\mu}m$ size of the particles in biogas. The coalescing filter(Micofine Borosilicate Glass Fibers Filter treated phenol acid) also removes moisture and oil of above $0.3{\mu}m$ to be involved in high pressure biogas up to 90%~98%.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2000

In order to reduce the groundwater contamination around the Kimpo landfill in Korea by the leakage of the leachate within it, The method establishing 5 sets of Radial Collector Well Laterals(RCWLs) within the landfill, the method utilizing the wells dewatering the condensed water, the method establishing an interception wall to the 2nd layer at the circumference of the landfill and 22 sets of RCWLs within it, and the method establishing an interception wall to the 3rd layer and 40 sets of RCWLs were studied. Hydraulic parameters were measured for this study and then the groundwater flow and contaminant transport systems around the Kimpo landfill were analyzed with the MODFLOW and MT3D models. Conclusively, the method establishing an interception wall to the 2nd layer and 22 sets of RCWLs was evaluated as the most stable and economical option to reduce groundwater contamination concentration below drinking water standards.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.5
• /
• pp.472-481
• /
• 2008

In this study hydraulic experiment was carried out to investigate the flow characteristics in the submerged outlet structure of Boryeong power plant and the efficiency of bubble reduction by installing horizontal porous plate in the outlet structure. The cross-sectional mean velocity in the submerged outlet structure was smaller than 1 m/s, the target value at the design stage to prevent bubble outflow to the open sea area. In addition, it was found that the maximum depth of bubble penetration is reduced 30 to 50% by installing the horizontal porous plate at the second falling location in the submerged outlet structure. It is expected that the total bubble amount entrained in the water will be most efficiently reduced by installing square-hole-shape porous plate of 20 cm hole size and making its central section as non-porous structure to dissipate the energy of falling water.