• Applied Biological Chemistry
• /
• v.47 no.1
• /
• pp.72-77
• /
• 2004

The purpose of this research was to determine the effect of phenol compounds from green tea leaves and surfactant micelles on lipid oxidation in com oil-in-water emulsion (O/W). The concentration of phenol and surfactant in continuous phase of the O/W with exceed Brij 700 and phenol compounds was measured. The particle size of O/W with phenol (100 ppm) increased with increasing added exceed surfactant $(0{\sim}2.0%)$ and the concentration of surfactant and phenols in the continuous phase higher than these of control. Lipid oxidation rates, as determined by the formation of lipid hydroperoxides and headspace hexanal, in the O/W emulsions containing phenol compounds (100 ppm) and exceed surfactant $(0{\sim}2.0%)$ decreased with increasing concentration of exceed surfactant. The ability of the phenol compounds and exceed surfactant to inhibit hydroperoxide and headspace hexanal producing as lipid oxidation in O/W was BHT>procyanidin B3-3-O-gallate> (+)-gallocatechin > (+)-catechin and 2% > 1 % > 0% of exceed surfactant. These results indicate that phenol compounds and exceed surfactant could alter the physical location of hydroperoxide in O/W.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.6
• /
• pp.933-940
• /
• 2013

In this study, methyl esters with different saturated fatty acids (SFA) were prepared by urea fractionation to make an oil-in-water emulsion. Emulsion characteristics (emulsion stability and oxidative stability) of the methyl ester emulsion were then studied at different percentages of methyl ester saturation (5, 28, 39, 50, and 72%, termed ${\Sigma}$SFA5, ${\Sigma}$SFA28, ${\Sigma}$SFA39, ${\Sigma}$SFA50, and ${\Sigma}$SFA72, respectively). The stability of emulsions (ES) with different SFA content was 46.0 (${\Sigma}$SFA5), 39.5 (${\Sigma}$SFA28), 32.7 (${\Sigma}$SFA39), 32.6 (${\Sigma}$SFA50), and 27.3 (${\Sigma}$SFA72). Results from Turbiscan showed that creaming or clarification, based on the backscattering intensity, was more pronounced with increases in the saturation degree of the emulsion. These results implied that the emulsions with lower saturation were more stable. During 30 days of storage, the lipid peroxide value increased for all emulsions, with the increase less pronounced with the increasing saturation of the emulsion; 1.880 (${\Sigma}$ SFA5), 1.267 (${\Sigma}$SFA28), 1.062 (${\Sigma}$SFA39), 0.342 (${\Sigma}$SFA50) and 0.153 (${\Sigma}$SFA72) mg $H_2O_2/mL$ emulsion. In addition, thiobarbituric acid reactive substances (TBARS) values were significantly lower in emulsions with high saturation (4.419 mg for ${\Sigma}$SFA50 and 4.226 mg for ${\Sigma}$SFA72) than emulsions with low saturation (6.229 mg for ${\Sigma}$SFA5, 6.801 mg for ${\Sigma}$SFA28 and 6.246 mg for ${\Sigma}$SFA39). In conclusion, the emulsions with a higher saturation degree of methyl esters showed lower emulsion stability but better oxidation stability.

• Tribology and Lubricants
• /
• v.5 no.1
• /
• pp.51-56
• /
• 1989

The Lubricational characteristics of O/W Emulsions of beef tallow and mineral oil based lubricants are studied in a roller on disk apparatus. It is revealed that the coefficients of friction with both emulsion lubricants exhibit essentially similar behavior; that is, they rapidly decrease to 0.1% concentration and after they constants with increasing oil concentration, and that, with oil in water emulsions of a concentrations as low as 5wt% practically forms a elastohydrodynamic film. One hand, surface temperature effect on lubricants has virtually no severe, and that, the minimum EHL film chickness estimated that it begins to increase at a concentration of several percent; the effect of particle diameter becomes maked there after.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1478-1486
• /
• 2018

Liquid crystals offer plenty of useful activities as improving the stability of emulsion, increasing moisturizing power, drug release, improving skin feeling and visual effect for cosmetics fields. In order to prepare stable semi-transparent gel emulsion, liquid crystal emulsification method was used. The emulsion stabilities of systems containing glycerin, fatty alcohols, surfactants, water and oil were investigated at various temperatures as time passed. The stabilities of all emulsions were evaluated by means of a polarizing microscope, SEM, rheometer, colorimeter and DSC. Even though the samples stored at $50^{\circ}C$ thermostatic chamber were occurred the reduction of hardness, turbidity and ${\Delta}H$ and the peak shift, the semi-transparent gel emulsion was very stable without separation between water and oils phase in emulsion.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.4
• /
• pp.284-288
• /
• 2001

Lipid emulsions with saturated triacylglycerols (TAGs) with 4 to 10 carbons in each acyl chain were prepared to study how the oil component alters the stability of the lipid emul-sions when phosphatidylcholines were used as emulsifiers. The average droplet size of the emul-sions became smaller as the chain length of the TAG increased. For a given oil emulsion with smaller droplets was formed with an emulsifier having higher HLB value. The influence of HLB values on the droplet size was biggest for the tributyrin (C4) emulsion. For the tricaprylin(C8) emulsions, droplet size was identical at given emulsifier concentrations regardless of HLB values. The HLB value and the concentration of the emulsifiers also affect the droplet size of the emul-sions. The emulsions with smaller average droplet size were more stable than with bigger size for 20 days. The oil and water (o/w) interfacial tension in inversely proportional to the initial droplet size of the emulsion.

• 한국연소학회:학술대회논문집
• /
• 1999.10a
• /
• pp.105-110
• /
• 1999

The elementary experiment was performed to develop the emulsified fuel production system using pressure injection nozzle in this study. The stabilities and characteristics of emulsified fuel which is produced through direct spray of water via pressure injection nozzle into oil are examined. To understand performance of emulsion production, stabilities of emulsified fuel which is made by adding water to the mixed fuel of Bunker-C and 10 $^{\sim}$ 50 vol% of heating oil were investigated. According to volume ratios of surfactant in heating oil the stability and SMDs were measured

• Membrane Journal
• /
• v.12 no.4
• /
• pp.216-225
• /
• 2002

Experimental study on the crossflow electro-microfi1tation of simulated oil emulsion waste water was carried out with polypropylene microfiltration membrane to evaluate the applicability of electrofiltration process in the treatment of oily waste water generated from many industries including nuclear field. The effects of electric field strength transmembrane pressure, crossflow velocity, and oil emulsion concentration on the permeate flux were investigated. In electro-microfiltration process using the external electric field, significant enhancement of permeate flux was achieved by diminishing membrane fouling and it was shown that considerable permeate flux can be maintained for long-term operation compared with conventional membrane filtration process without an electric field.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.2
• /
• pp.13-20
• /
• 2013

In this study, two biodegradable polymer(PLA, PBS) emulsions were treated on agricultural packaging paper such as fruit bagging paper. Water-repellency, mechanical properties, and SEM image with thermal aging were measured on the emulsion treated fruit bagging paper. Biodegradable polymers(such as poly lactic acid, poly butylene succinate) emulsion treated fruit bagging paper had higher water-repellency and strength than other water-repellent(such as acrylic repellent, linseed oil and paraffin wax) treated fruit bagging paper. According to FE-SEM results of polymer emulsion coated fruit bagging paper, the colloidal particles of emulsion after thermal treatment (looks like being) were adhered to the fibers. Thus, using biodegradable polymer emulsion is expected to protect a fruit for a long time.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.6
• /
• pp.28-35
• /
• 2012

Water-in-oil emulsion (W/O) and oil-in-water emulsion (O/W) types biodegradable polymer emulsions prepared to PLA and PBS. The optimal mixing ratio of polymer : solvent : OA : TEA : water was found be 10 : 40 : 4 : 6 : 30(g) when preparing emulsions. Biodegradability was most retained after preparation of polymer emulsions. Particle size of PLA and PBS emulsions were 2-3 ${\mu}m$ and 3-4 ${\mu}m$, respectively. Molecular weight of PLA and PBS emulsions were 108,000 and 92,000, respectively. And molecular weight of PLA and PBS emulsions became slightly lower than those of pellets.

• Journal of ILASS-Korea
• /
• v.16 no.3
• /
• pp.152-158
• /
• 2011

Fast pyrolysis of biomass is one of the most promising technologies for converting biomass to liquid fuels. The pyrolysis oil, also known as the bio crude oil (BCO), have been regarded as an alternative fuel for petroleum fuels to be used in diesel engine. However, the use of BCO in diesel engine requires modifications due to low energy density, high water contents, low acidity, and high viscosity of the BCO. One of the easiest way to adopt BCO to diesel engine without modifications is the use of BCO/diesel emulsions. In this study, a diesel engine operated with diesel, bio diesel (BD), and BCO/diesel emulsion was experimentally investigated. Performance and emission characteristics of a diesel engine fuelled by BCO/diesel emulsion were examined. Results showed that stable engine operation was possible with emulsion and engine output power was comparable to diesel and bio diesel operation. Long term validation of adopting BCO in diesel engine is still needed because the oil is acid, with consequent problems of corrosion especially in the injection system.