• 한국유체기계학회 논문집
• /
• 제10권6호
• /
• pp.17-23
• /
• 2007

In the present work, flow analysis has been performed in the steam turbine bypass control valve (single-path type) for two different cases i.e., case with steam only and case with both steam and water. The numerical analysis is performed by solving three-dimensional Reynolds-averaged Navier-Stokes (RANS) equations. The shear stress transport (SST) model and $k-{\varepsilon}$ model are used to each different case as turbulence closure. Symmetry condition is applied at the mid plane of the valve while adiabatic condition is used at the outer wall of the cage. Grid independency test is performed to find the optimal number of grid points. The pressure and temperature distributions on the outer wall of the cage are analyzed. The mass flow rate at maximum plug opening condition is compared with the designed mass flow rate. The numerical analysis of multiphase mixing flow(liquid and vapor) is also performed to inspect liquid-vapor volume fraction of bypass valve. The result of volume fraction is useful to estimate both the safety and confidence of valve design.

• 한국전기전자재료학회논문지
• /
• 제23권5호
• /
• pp.397-402
• /
• 2010

In this paper, we studied WVTR(water vapor transmission rate) properties of $Si_3N_4$ thin film that was deposited using TCP-CVD (transformer coupled plasma chemical vapor deposition) method for the possibility of OLED(organic light emitting diode) encapsulation. Considering the conventional OLED processing temperature limit of below $80^{\circ}C$, the $Si_3N_4$ thin films were deposited at room temperature. The $Si_3N_4$ thin films were prepared with the process conditions: $SiH_4$ and $N_2$, as reactive gases; working pressure below 15 mTorr; RF power for TCP below 500 W. Through MOCON test for WVTR, we analyzed water vapor permeation per day. We obtained that WVTR property below 6~0.05 gm/$m^2$/day at process conditions. The best preparation condition for $Si_3N_4$ thin film to get the best WVTR property of 0.05 gm/$m^2$/day were $SiH_4:N_2$ gas flow rate of 10:200 sccm, working pressure of 10 mTorr, working distance of 70 mm, TCP power of 500 W and film thickness of 200 nm. respectively. The proposed results indicates that the $Si_3N_4$ thin film could replace metal or glass as encapsulation for flexible OLED.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.320-320
• /
• 2011

We describe fabrication of superhydrophobic surface on non-woven fabric (NWF) having nano-hairy structures and a hydrophobic surface coating. Oxygen plasma was irradiated on NWF for nano-texuring and a precursor of HMDSO (Hexamethydisiloxane) was introduced as a surface chemical modification for obtaining superhydrophobicity using 13.56 MHz radio frequency-Plasma Enhanced Chemical Vapor Deposition (rf-PECVD). O2 plasma treatment time was varied from 1 min to 60 min at a bias voltage of 400V, which fabricated pillar-like structures with diameter of 30 nm and height of 150 nm on NWF. Subsequently, hydrophobic coating using hexamethyldisiloxane vapor was deposited with 10 nm thickness on NWF substrate at a bias voltage of 400 V. We evaluate superhydrophobicity of the modified NWF with sessile drop using goniometer and high speed camera, in which aspect ratio of nanohairy structures, contact angle and contact angle hysteresis of the surfaces were measured. With the increase of aspect ratio, the wetting angle increased from $103^{\circ}$ to $163^{\circ}$, and the contact angle hysteresis decreased dramatically below $5^{\circ}$. In addition, we had conducted experiment for nucleation and condensation of water via E-SEM. During increasing vapor pressure inside E-SEM from 3.7 Torr to over 6 Torr which is beyond saturation point at $2^{\circ}C$, we observed condensation of water droplet on the superhydropobic NWF. While the condensation of water on oxygen plasma treated NWF (superhydrophilic) occurred easily and rapidly, superhydrophobic NWF which was fabricated by oxygen and HMDSO was hardly wet even under supersaturation condition. From the result of wetting experiment and water condensation via E-SEM, it is confirmed that superhydrophobic NWF shows the grate water repellent abilities.

• Journal of Forest and Environmental Science
• /
• 제21권1호
• /
• pp.92-97
• /
• 2005

1. 상엽의 기공증산속도는 광도가 증가함에 따라 계속적인 증가를 나타냈지만, 중엽과 하엽은 광도 약 $100{\mu}mol\;m^{-2}S^{-1}$ 이상에서 기공증산의 포화가 나타났다. 포화광도 $1,200{\mu}mol\;m^{-2}S^{-1}$)에서 기공증산은 상엽($1.29mmol\;H_2O\;m^{-2}S^{-1}$) > 중엽($0.56mmol\;H_2O\;m^{-2}S^{-1}$) > 하엽($0.31mmol\;H_2O\;m^{-2}S^{-1}$)순위였다. 2. 엽의 수분이용효율은 광도 $600{\mu}mol\;m^{-2}S^{-1}$ 까지 빠르게 증가하다가 그 이상의 광도에서는 감소한 반면, 중엽과 하엽은 광도 $400{\mu}mol\;m^{-2}S^{-1}$ 까지는 증가하였지만 그 이상의 광도에서는 증가를 보이지 않았다. 3. 엽의 광도증가에 따른 수증기압결핍은 직선적으로 감소하는 경향을 나타냈다.

• 한국지구과학회지
• /
• 제42권3호
• /
• pp.264-277
• /
• 2021

본 연구의 목적은 최근 발생한 태풍들의 이동속도와 관련하여 대기 중 총가강수량의 변화를 분석하는 것이다. 이 연구를 위해 미국기상위성연구소 및 기상청 천리안위성 2A호(GEO-KOMPSAT-2A)의 총가강수량 및 주야간 RGB 합성영상 자료뿐만 아니라 기상청의 기온, 강수량 및 풍속 등의 지상 관측 자료가 사용되었다. 기상청에서 제공하는 태풍 위치 및 이동속도를 활용하여, 2020년 태풍 바비, 마이삭, 하이선과 2019년 태풍 타파, 그리고 2018년 태풍 콩레이의 이동속도를 위도별 태풍 평균속도 통계자료와 비교하였다. 그 결과, 타파와 콩레이는 태풍의 위도별 평균속도와 유사하게 나타났으나 바비와 마이삭은 위도 약 25°N-30°N 구간에서 이동속도가 크게 감소하여 나타났다. 이는 대기 중의 수증기 띠가 전선의 형태로 바비와 마이삭 두 태풍의 전방에 위치하여 이들 태풍의 이동에 방해를 주었기 때문이었다. 즉 이동하는 태풍의 전방에 하층제트로 인해 발생한 수증기 띠가 전선을 형성할 경우, 이 전선과 태풍 사이에 위치하는 고기압 역은 더욱 발달하면서 열대야와 함께 블로킹 효과로 작용하여 태풍의 이동속도가 느리게 나타났다. 결과적으로 대기 중의 수증기가 많았던 바비와 마이삭의 경우, 1차로 하층제트를 따라 수증기 띠가 전선을 형성함으로 인한 집중호우가, 2차로 전선과 태풍 사이에 고기압 역의 하강기류로 인한 열대야 현상이, 그리고 3차로 태풍 자체의 육지 상륙에 의한 강풍과 폭우가 연달아 발생하였다.

• 한국의류학회지
• /
• 제25권1호
• /
• pp.154-161
• /
• 2001

We have treated polyester fabric with $CF_4,\;C_2F_6,\;SF_6\;and\;C_3F_6$ glow discharge plasmas to develop functional fabrics which preserve moisture transportation and water proofing nature. Modified properties were evaluated by water vapor permeation rate and breakthrough water pressure. The change of surface morphology was observed by SEM. Fiber interstice of the plasma treated fabric was calculated as $0.32{\mu}{\textrm}{m}$, and this value was sufficiently ideal as water repellent material. The moisture transportation of ${CF_4}-treated$ fabric was good as much as untreated fabric, and those of $C_2$F(sub)6-treated, SF(sub)6-treated fabrics were reduced by 1~3%, and that of ${C_3F_6}-treated$ fabric was reduced by 15%. The best treatment condition were 0.06 torr 120 seconds in $CF_4$, 0.05 torr 30 seconds in $SF_6$, 0.08~0.15 torr 90 seconds in $SF_6$ and 0.1 torr 45 seconds in $C_3F_6$ respectively. The grade of moisture transportation effect was $CF_4>C_2F_6>SF_6>>C_3F_6$, and water proofing effect was $C_2F_6{\approx}CF_4>C_3F_6>SF_6$. It was observed by SEM that the thin film was formed on the surface of the treated substrate by the fluorocarbon plasma treatment.

• 한국전산유체공학회지
• /
• 제15권2호
• /
• pp.86-94
• /
• 2010

A thermal-hydraulic code, named CUPID, has been developed for the analysis of transient two-phase flows in nuclear reactor components. A two-fluid three-field model was used for steam-water two-phase flows. To obtain numerical solutions, the finite volume method was applied over unstructured cell-centered meshes. In steam-water two-phase flows, a phase change, i.e., evaporation or condensation, results in a great change in the flow field because of substantial density difference between liquid and vapor phases. Thus, two-phase flows are very sensitive to the local pressure distribution that determines the phase change. This in turn puts emphasis on the accurate evaluation of local pressure gradient. This paper presents a new reconstruction method to evaluate the pressure gradient at cell centers on unstructured meshes. The results of the new scheme for a simple test function, a gravity-driven cavity, and a wall boiling two-phase flow are compared with those of the previous schemes in the CUPID code.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.619-624
• /
• 2001

A performance test facility for turbopump inducer cavitation was developed and the inducer cavitation performance tests were performed. Major components of the performance test facility are driving unit, test section, piping, water tank, and data acquisition and control system. The maximum of testing capability of this facility are as follows: flow rate - 30kg/s; pressure - 13 bar; rotational speed 10,000rpm. This cavitation test facility is characterized by the booster pump installed at the outlet of the pump that extends the flow rate range, and by the pressure control system that makes the line pressure down to vapor pressure. The vacuum pump is used for removing the dissolved air in the water as well as the line pressure. Performance tests were carried out and preliminary data of test model inducer were obtained. The cavitation performance test and cavitation bubble flow visualization were also made. This facility is originally designed for turbopump inducer performance test and cavitation test. However it can be applied to the pump impeller performance test in the future with little modification.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.101-111
• /
• 2014

In this study the effect of heartwood-coating (HCO), vapor-dam (VD), bark-remaining (BR) and bark-remaining-coating (BRC) treatments on the air circulating oven-drying characteristics of Japanese larch hollowed round-post was evaluated. The drying times of the hollowed round-posts for control, VD, HCO and BR specimens were 72, 168, 204 and 240 hours, respectively, from the initial MC to about 8% MC, which was recommended as the indoor in-use MC. The temperature in the hole of the VD specimen was lower than that of wood and the difference between air temperature in the hole and wood temperature became large during drying period. The vapor pressure of air in the hole was higher than that of inside wood for all specimens except VD specimen. The surface checks on all specimens were observed in increasing order of BR, BRC, UC, HCO and VD specimens.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.50-55
• /
• 2015

본 연구에서는 공동 주택의 수전 개방 조건에서, 감압밸브 내부 오리피스 형상이 캐비테이션 발생에 미치는 영향에 대하여 살펴보았다. 이를 위하여 감압밸브 내부의 유로형상을 9가지 유형으로 구별하여 제시하고, 3차원 유한해석 코드인 ANSYS CFX를 사용하여 감압밸브 내의 유동해석을 수행하였다. 급격한 단면 변화가 일어나는 오리피스에서 최저 압력과 최대 속도가 발생하였다. 최대속도가 존재하는 부위에서 0 이상 증기체적비를 나타내어 캐비테이션이 발생함을 확인하였다. 유로 길이가 긴 형상에 비하여 돌연 확대관 형상의 모델에서 유체의 최대 속도가 낮게 나타났다. 돌연확대관 형상의 경우에는 매우 작은 증기체적비를 나타내고 있으며, 돌연확대의 정도가 클수록 증기체적비는 낮게 나타났다. 따라서 감압밸브의 케비테이션 발생을 방지하기 위해서는 돌연확대의 형상을 갖도록 설계하는 것이 타당하다고 판단된다.