• Title/Summary/Keyword: water vapor content

Search Result 170, Processing Time 0.033 seconds

Synthesis and Evaluation of Copoly(chitosan-g-L-lysine) for Wound Covering Material (Chitosan과 L-lysine의 공중합체로 부터 인공피부의 제조와 평가)

  • Kim, K.Y.;Min, D.S.;Park, S.H.;Lee, S.Y.;Cho, Y.J.;Chung, Y.H.;Kim, J.M.
    • Proceedings of the KOSOMBE Conference
    • /
    • v.1989 no.05
    • /
    • pp.7-8
    • /
    • 1989
  • The graft copolymer of chitosan with amino acid, L-lysine was synthesized by heterogeneous copolymerization and was evaluated as an artificial skin. The mechanical properties under dry and wet state, water content, water vapor transmittance rate and biodegradability were measured. The tensile strength and elongation under wet state ranged $0.3-0.5\;kg/mm^2$, 10-13%, respectively. Water vapor transmittance rate ranged $450-500\;g/m^2{\cdot}day$ like that of the normal skin. The weight loss of prepared membrane by protease IV was measured for the degree of biodegradation. The degree of biodegradation was around 15% and after 4 days it was slow. Biocompatibility was evaluated by studying the attachment of human fibroblast on the prepared membrane surface.

  • PDF

Preparation and Physical Characteristics of High-Performance Heat Storage.Release Fabrics with PCMMc : Wet coating process (상전이 마이크로캡슐이 함유된 고기능성 축열.발열 직물의 제조 및 물리적 특성 : 습식코팅)

  • Koo, Kang;Choe, Jong-Deok;Choi, Jong-Suk;Kim, Eun-Ae;Park, Young-Mi
    • Textile Coloration and Finishing
    • /
    • v.19 no.1 s.92
    • /
    • pp.24-30
    • /
    • 2007
  • Heat storage/release system in textile is a useful tool to increase energy efficiency and enhance comfortable microclimate of clothing. Phase change materials(PCM) are used in regulating storage and release properties of thermal energy. To investigate the temperature regulating ability of fabrics with PCM microcapsule(PCMMc), Nylon fabrics were coated with PCMMc via wet processing and they were characterized by SEM, DSC and infrared thermal analyzer. Also, water moisture transpiration, water penetration resistance, peel strength and washing durability of the fabrics were assessed. The water vapor permeation and water penetration resistance decreased with increasing PCMMc content. In DSC analysis, it can be seen that the microencapsulated fabric showed both exothermic md endothermic phenomena at specific temperature. Peel strength was decreased with increasing PCMMc content.

Hydro-mechanical behavior of compacted silt over a wide suction range

  • Chen, Bo;Ding, Xiuheng;Gao, You;Sun, De'an;Yu, Haihao
    • Geomechanics and Engineering
    • /
    • v.22 no.3
    • /
    • pp.237-244
    • /
    • 2020
  • To achieve a wide suction range, the low suction was imposed on compacted silt specimens by the axis translation technique and the high suction was imposed by the vapor equilibrium technique with saturated salt solutions. Firstly, the results of soil water retention tests on compacted silt show that the soil water retention curves in terms of gravimetric water content versus suction relation are independent of the dry density or void ratio in a high suction range. Therefore, triaxial tests on compacted silt with constant water content at high suctions can be considered as that with constant suction. Secondly, the results of triaxial shear tests on unsaturated compacted silt with the initial void ratio of about 0.75 show a strain-hardening behavior with a slightly shear contraction and then strain-softening behavior with an obviously dilation. As the imposed suction increases, the shear strength increases up to a peak value and then decreases when the suction is beyond a special value corresponding to the peak shear strength. The residual strength increases to fair value and those at high suctions are almost independent of imposed suctions. In addition, the contribution of suction to the strength of compacted silt would not diminish even in a high suction range.

Reduction of Organics in an Unsaturated Zone Using Zero-Valent Metals (영가금속을 이용한 불포화대에서 유기물질의 환원적 분해)

  • Kim, Jong-Gun;Kwon, Hee-won;Kim, Jeong-Jin;Hwang, In-Seong;Kim, Young-Hun
    • Journal of Environmental Science International
    • /
    • v.31 no.1
    • /
    • pp.77-85
    • /
    • 2022
  • Environmental contamination by organic compounds are not only restricted to water, but extends to soil and groundwater as well. However, highly oxidized compounds, such as halogenated organics and nitro-compounds, can be detoxified employing reducing methods. Permeable reactive barrier is one of the representative technologies where zero-valent metals (ZVMs) are employed for groundwater remediation. However, organics contaminates often contaminate the unsaturated zone above the groundwater. Despite the availability of technologies like soil vapor extraction and bioremediation, removing organic compounds from this zone represents several challenges. In this study, the reduction of nitrobenzene to aniline was achieved using zero-valent iron (ZVI) under unsaturated conditions. Results indicated that the water content was an important variable in this reaction. Under dry conditions (water content = 0.2%), the reduction reaction was inhibited; however, when the water content was between 10% and 25% (saturated condition), ZVI can reduce nitrobenzene. Palladized iron (Pd/Fe) can be used to reduce nitrobenzene when the water content is between 2.5% and 10%. The reaction was evaluated over a wide range of temperatures (10 - 40 ℃), and the results indicated that increasing the temperature resulted in increased reaction rates under unsaturated conditions.

Hot Air Injection/Extraction Method for the Removal of Semi-Volatile Organic Contaminants from Soils (토양내 저휘발성 유류오염물 제거를 위한 고온공기 주입/추출기술 연구)

  • Gu Chung-Wan;Ko Seok-Oh
    • Journal of Soil and Groundwater Environment
    • /
    • v.10 no.1
    • /
    • pp.6-12
    • /
    • 2005
  • Contamination of soils and groundwater by leakage of petroleum compounds from underground storage tanks (USTs) has become great environmental issues. Conventional methods such as soil vapor extraction (SVE) used for the remediation of unsaturated soils contaminated with volatile organic compounds might not be applied for the removal of semi-volatile organic compounds such as diesel fuels and PCBs, which have low volatility and high hydrophobicity. The objective of this study is to develop a hot air injection method to remove semi-volatile compounds. Additionally, operation parameters such as temperature, air flow rate, and water content are evaluated. Experimental results show that diesel ranged organics (DROs) are removed in the order of volatility of organic compounds. As expected, removal efficiency of organics is highly dependent on the temperature. It is considered that more than $90\%$ of organic contaminants whose carbon numbers range between 17 and 22 can be removed efficiently by the hot air injection-extraction method (modified SVE) over the $100^{\circ}C$. It is also found that increased air flow rate resulted in high removal rate of contaminants. However, air flow rate over 40 cc/min is not effective for the operation aspects, due to mass transfer limitation on the volatilization rate of the contaminants. The effect of the water content on the decane removal is minimal, but some components show large dependence on the removal efficiency with increasing water content.

Refinement of GRACE Gravity Model Including Earth's Mean Mass Variations (지구 평균 질량 변화를 포함한 GRACE 중력 모델 보정)

  • Seo, Ki-Weon;Eom, Jooyoung;Kwon, Byung-Doo
    • Journal of the Korean earth science society
    • /
    • v.35 no.7
    • /
    • pp.537-542
    • /
    • 2014
  • The Gravity Recovery and Climate Experiment (GRACE) has observed the Earth's mass redistribution mainly caused by the variations of groundwater, ice sheet, and sea level since its launch in April 2002. The global gravity model estimated by the GRACE observation is corrected by barometric pressure, and thus represents the change of Earth mass on the Earth's surface and below Earth's surface excluding air mass. However, the total air mass varies due to the water exchange between the Earth's surface and the atmosphere. As a result, the nominal GRACE gravity model should include the Earth's gravity spectrum associated with the total air mass variations, degree 0 and order 0 coefficients of spherical harmonics ($C_{00}$). Because the water vapor content varies mainly on a seasonal time scale, a change of $C_{00}$ (${\delta}C_{00}$) is particularly important to seasonal variations of sea level, and mass balance between northern and southern hemisphere. This result implies that ${\delta}C_{00}$ coefficients should be accounted for the examination of continental scale mass change possibly associated with the climate variations.

Atmospheric Correction Issues of Optical Imagery in Land Remote Sensing (육상 원격탐사에서 광학영상의 대기보정)

  • Lee, Kyu-Sung
    • Korean Journal of Remote Sensing
    • /
    • v.35 no.6_3
    • /
    • pp.1299-1312
    • /
    • 2019
  • As land remote sensing applications are expanding to the extraction of quantitative information, the importance of atmospheric correction is increasing. Considering the difficulty of atmospheric correction for land images, it should be applied when it is necessary. The quantitative information extraction and time-series analysis on biophysical variables in land surfaces are two major applications that need atmospheric correction. Atmospheric aerosol content and column water vapor, which are very dynamic in spatial and temporal domain, are the most influential elements and obstacles in retrieving accurate surface reflectance. It is difficult to obtain aerosol and water vapor data that have suitable spatio-temporal scale for high- and medium-resolution multispectral imagery. Selection of atmospheric correction method should be based on the availability of appropriate aerosol and water vapor data. Most atmospheric correction of land imagery assumes the Lambertian surface, which is not the case for most natural surfaces. Further BRDF correction should be considered to remove or reduce the anisotropic effects caused by different sun and viewing angles. The atmospheric correction methods of optical imagery over land will be enhanced to meet the need of quantitative remote sensing. Further, imaging sensor system may include pertinent spectral bands that can help to extract atmospheric data simultaneously.

Water Vapor Sorption Behavior of Some Agricultural Products Produced in Korea (일부(一部) 한국산(韓國産) 농산물(農産物)의 등온흡습곡선(等溫吸濕曲線)에 관(關)한 연구(硏究))

  • Rhee, Chul;Maeng, Young-Sun
    • Korean Journal of Food Science and Technology
    • /
    • v.15 no.4
    • /
    • pp.315-320
    • /
    • 1983
  • The water vapor sorption isotherms for a great variety of agricultural products were determined by using the standard salt solution technique at the temperatures of $25^{\circ},\;35^{\circ}\;and\;45^{\circ}C$. The B.E.T. monomolecular layer moisture contents were evaluated from experimental data on the sorption isotherms, and an analysis was made of the thermodynamic functions for water vapor sorption behaviors with respect to the storage stability of dehydrated foods. It may be concluded that the variation of entropy with moisture content of some agricultural products and seaweeds investigated would be a guide for the elucidation of the storage stability of dehydrated foods.

  • PDF

Dimensional Change of Acetylated Softwood (아세틸화 침엽수재의 치수변화 특성)

  • Han, Gyu-Seong;Cho, Nam-Seok
    • Journal of the Korean Wood Science and Technology
    • /
    • v.24 no.4
    • /
    • pp.40-46
    • /
    • 1996
  • It is well-known fact that dimensional stability of wood is greatly enhanced by acetylation of wood. This dimensional stability results from bulking of the reacted acetate within the cell wall, which reduces further swelling when the modified woods corne into contact with water or water vapor. The purpose of this research was to determine the water absorption and dimensional stability of the acetylated solid wood in liquid water and in humidity tests. Radiata pine, Siberian larch, and Japanese larch were acetylated. Antiswelling efficiency(ASE) and equilibrium moisture content(EMC) of acetylated wood, at 95% RH and $20^{\circ}C$ after 4weeks, was quite dependent on WPG, but was not dependent on species.

  • PDF

Mechanical and Water Barrier Properties of Soy Protein and Clay Mineral Composite Films

  • Rhim, Jong-Whan;Lee, Jun-Ho;Kwak, Hyo-Sup
    • Food Science and Biotechnology
    • /
    • v.14 no.1
    • /
    • pp.112-116
    • /
    • 2005
  • Composite films were prepared with soy protein isolate (SPI) and various clay minerals by casting from polymer and clay water suspension. Effects of clay minerals on film thickness, moisture content (MC), tensile strength (TS), elongation at break (E), water vapor permeability (WVP), and water solubility (WS) were tested. Properties including thickness, surface smoothness, and homogeneity of films prepared with organically modified montmorillonite (O-MMT), Wamok clay (W-clay), bentonite, talc powder, and zeolite were comparable to those of control SPI films. TS increased significantly (p<0.05) in films prepared with O-MMT and bentonite, while WVP decreased significantly (p<0.05) in bentonite-added films. WS of most nanocomposite films decreased significantly (p<0.05).