• Economic and Environmental Geology
• /
• v.40 no.2 s.183
• /
• pp.209-221
• /
• 2007

Numerical analysis was performed to investigate the effect of heavy metal contamination on neighboring environment in case a dam is constructed by using rockfill materials contaminated by heavy metals. The numerical simulation carried out in this research includes both subsurface flow and contaminant transport in the inside of the CFRD(Concrete Faced Rockfill Dam), using two commercial programs, SEEP2D and FEMWATER. The three representative cases of scenarios were chosen to consider a variety of cases occurring in a dam site; (1) Scenario 1 : no crack in the concrete face slab, (2) Scenario 2 : a crack In the upper part of face slab, and (3) Scenario 3 : a crack between plinth and face slab in the lower part of face slab. As a result of seepage analysis, the amount of seepage in scenario 2 was calculated as $14.31\sim14.924m^3/day$ per unit width, corresponding to the 1,000 times higher value than that in other scenarios. Also, in the simulation of contaminant transport by using FEMWATER, specified contaminant concentration of 13 ppb in main rockfill zone was set to consider continuous leakage from the rock materials. Through the analysis of contaminant transport, we found that elapsed times to take for the contaminant concentration of about 2 ppb to arrive at the end of a dam are as follows. Scenario 1 has the elapsed time of 55,000 years. In Scenario 2. it is 50 years. Finally, scenario 3 has 27,000 years. The rapid transport of the contaminant in scenario 2 was attributed to greater seepage flow by 500 times than other scenarios. Although, in case of upper crack in the face slab, it was identified that the contaminant might transport to the end of a dam within 100 years with about 2 ppb concentration, however, it happened that the contaminant was hardly transported out of the dam in other scenarios, which correspond to either no crack or a crack between plinth and face slab. In conclusion, the numerical analysis showed that the alternative usage of the contaminated sand and gravel as the dam embankment material can be one of the feasible methods with the assumption that the cracks in a face slab could be controlled adequately.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.762-770
• /
• 2005

Adsorption and biodegradation performance of chlorinated by-products such as trihalomethanes(THMs) and haloacetic acids(HAA5) on granular activated carbon were evaluated in this study. The coconut-based activated carbon was found more effective than others in adsorption of THMs due to larger pore volume of less than $20{\AA}$. The wood-based activated carbon was less effective than coconut- and coal-based activated carbon in adsorption nevertheless having larger pore volume and specific surface area than others. The maximum adsorption capacity(X/M) of coconut-based carbon for THMS was 1.1-1.5 times larger than coal based carbon and 14.1-31.4 times larger than wood based activated carbons. Activated carbon usage rate(CUR) of coconut-, coal- and wood-based activated carbons for chloroform were 9.4, 11.2 and 38 g/day respectively. In the evaluation of adsorption isotherm of THM species for coconut-, coal- and wood-based activated carbons, k value of chloroform was the lowest in the THM species, It menas that chloroform is difficult to remove by activated carbon adsorption. and BDCM, CDBM, bromoform are in the succeeding order of adsorption. In the evaluation of biodegradation rate, mean biodegradation rate was chloroform 7%, BDCM 5%, CDBM 4% and bromoform 3%, respectively THMs are difficult materials to be biodegraded. In the evaluation of characteristics of adsorption and biodegradation for HAA5 species, HAA5 species appear to be removed effectively by activated carbon. Most of the HAA5 are adsorbed at the beginning of operation periods and HAA5 except TCAA were almost biodegraded from bed volume of 2,000 and more than 90 percent of biodegradation of TCAA was started from bed volume around 4,000 and after that biodegradation rate was increased with increasing bed volume.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.313-331
• /
• 2022

Natural or native abiotic molecular hydrogen (H₂) is a major component in natural gas, however yet its importance in the global energy sector's usage as clean and renewable energy is underestimated. Here we review the occurrence and geological settings of native hydrogen to demonstrate the much widesprease H₂ occurrence in nature by comparison with previous estimations. Three main types of source rocks have been identified: (1) ultramafic rocks; (2) cratons comprising iron (Fe²⁺)-rich rocks; and (3) uranium-rich rocks. The rocks are closely associated with Precambrian crystalline basement and serpentinized ultramafic rocks from ophiolite and peridotite either at mid-ocean ridges or within continental margin(Zgonnik, 2020). Inorganic geological processes producing H₂ in the source rocks include (a) the reduction of water during the oxidation of Fe²⁺ in minerals (e.g., olivine), (b) water splitting due to radioactive decay, (c) degassing of magma at low pressure, and (d) the reaction of water with surface radicals during mechanical breaking (e.g., fault) of silicate rocks. Native hydrogen are found as a free gas (51%), fluid inclusions in various rock types (29%), and dissolved gas in underground water (20%) (Zgonnik, 2020). Although research on H₂ has not yet been carried out in Korea, the potential H₂ reservoirs in the Gyeongsang Basin are highly probable based on geological and geochemical characteristics including occurrence of ultramafic rocks, inter-bedded basaltic layers and iron-copper deposits within thick sedimentary basin and igneous activities at an active continental margin during the Permian-Paleogene. The native hydrogen is expected to be clean and renewable energy source in the near future. Therefore it is clear that the origin and exploration of the native hydrogen, not yet been revealed by an integrated studies of rock-fluid interaction studies, are a field of special interest, regardless of the presence of economic native hydrogen reservoirs in Korea.

• Korean Journal of Ecology and Environment
• /
• v.56 no.4
• /
• pp.348-362
• /
• 2023

This study analyzed the monitoring results of fishways at 16 weirs constructed on four large Rivers to provide data helpful for the operation and management of fishways. The average utilization rate of the fishways at the weirs was confirmed to be 64.9%. When comparing the dominant species in the mainstream and fishway monitoring results, differences were observed in 9 weirs (56.3%). This indicated that the species prevalent in the mainstream were not necessarily the ones most frequently using the fishways. The average number of individuals using the fishways per day was 336. When classifying the fish species using the fishway by life type, 92.3% were primary freshwater fish, and migratory species accounted for only 5.6%. Analysis based on the season of fishway usage revealed that an average or higher number of fish species used the fishways from May to October, with the highest number of individual users occurring from June to August. Between May and July, 80% of the fish species using the fishways were in their spawning period, while during other season, less than 40% were species that move during the spawning period. The fishways that showed a significant alignment between the spawning period and the fishway passage period were Rhinogobius brunneus, Leiocassis nitidus, Squalidus chankaensis tsuchigae, Pseudogobio esocinus, Acheilognathus rhombeus, and Pungtungia herzi, in that order. When comparing the fishway monitoring results of the Gangjeong-Goryeong Weir and the Dalseong Weir with the upper part water level of the weir, both the number of fish species and individuals using the fishway showed positive correlations with the upper part water level of the weir. This suggests that a higher water level of the weir increases the inflow discharge within the fishway, leading to increased use by fish (number of individuals in Gangjeong-Goryeong Weir, P<0.001; number of species in Dalseong Weir, P<0.05). This study summarized and analyzed the results of fishway monitoring at 16 weirs built on four large Rivers, considering fishway efficiency, operation and management, monitoring period, and regulation of water level in the upper part of the weir. It is thought that this will help understand the status of fish use in fishways on large River and aid the construction, operation, and management of fishways in the future.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.492-500
• /
• 2023

The spectrum of this study was research on the closed hydroponic cultivation of netted melons (Cucumis melo L.) using coir substrate, analyzing the impact of this cultivation method on melon yield, fruit quality, and the efficiency of water and nutrient usage. The experimental results showed that the average fruit weight of the melons grown in a closed system was 71.4 g higher than that of the open system, and the fruit width was on average 0.2 cm larger, showing a statistically significant difference. However, there was no difference in the average sugar content of the fruit flesh and height. Although there is no substantial commercial difference, it is conjectured that the change in the macronutrients ratio in the irrigation has played a role in the statistically significant increase in fruit weight, which is attributed to changes in the crops' nutrient uptake concentrations. This necessitates further research for a more comprehensive understanding. In terms of the productivity of irrigation required to produce the fruit, applying the closed system resulted in an increase of 7.6 kg/ton compared to the open system, saving 31.6% of water resources. Additionally, in terms of nutrients, cultivating in a closed system allowed for savings of approximately 59, 25, 55, 83, 76, and 87% of N, P, K, Ca, Mg, and S, respectively, throughout the entire cultivation period. As the drainage was reused, the ratios of NO₃^- and Ca²⁺ increased up to a maximum of 9.6 and 9.1%, respectively, while the ratios of other ions gradually decreased. In summary, these results suggest that closed hydroponic cultivation can effectively optimize the use of water and fertilizer while maintaining excellent fruit quality in melon cultivation.

• Journal of the Korean Society of Food Culture
• /
• v.15 no.1
• /
• pp.59-68
• /
• 2000

This survey investigated on the degree of acknowledgment, intake frequency and using methods of wild grasses of the residents in Kyeonggi, Kangwon, Chunnam, Chungbook, Kyeongnam & Cheju area. The results were as follows: 1. An answer that impression of wild grasses is 'nature food' was the highest(42.6%). It was founded that interest of nature food has been increasing. 2. It has been shown that the most common method for elimination of astringent taste is to blanch and then wash several times with water.(62.9%) 3. The most common obtaining routes was traditional market. It has been shown that rate of gathering in the fields is higher in rural community and the group of over 60 years old than that of urban community and the other groups. 4. In rural area, people(28.7%) ate wild grasses more frequently than in urban area. Family with the old and the group of over 40 years old eat wild grass often. 5. More than 95% of answerers were familiar with the names of wild grasses, codonopsis lanceolata, chinese bellflower, braken, mugwort, wild rocambole and edible shoots of a fatsia & Korean lettuce are known to them with over 88.6%, 85.1% respectively. Frequently eaten wild grasses were braken, chinese bellflower, wild tocambole, codonopsis lanceolata, mugwort and korean lettuce orderly. But in Chunnam & Kyeongnam, they were braken, chinese bellflower, mugwort, wild rocambole and Korean lettuce orderly. 6. Wild grasses eaten with rice were total 25 species, and mugwort had the highest usage rate with 41.9%. Mugwort was used for $D'{\breve{o}}k$(rice cake)(77.8%), T'wigim $J{\breve{o}}n$(deep fat fried dish swallow fat fried dish)(50.1%) and liquor(4.6%). In the cooking of Guk(soup), Chigae(stew), Sengch'ae(raw vegetable) and kinds of wild grasses for Namul(cooked seasonal vegetable) & Bokkum(saute) are the most various with 58 species, especially braken was most commonly used for saute. Sedum & Korean lettuce were the common ingredients of Kimch and codonopsis lanceolata was used in liquer & Jangachis(pickle) with 40%, 46% each. Chinese bellflower was used with the most variable cooking method. 7. 43 species of wild grasses were stored by blanching and drying, and braken had the highest rate(32.3%) then aster scaber, flowering fern, Pimpinella brachycarpa, mugwort and ligularia orderly.

• Journal of Animal Environmental Science
• /
• v.13 no.2
• /
• pp.129-138
• /
• 2007

A natural deodorizing agent (NDA) was made using pine cone byproduct, and its effects on malodor emission and composting were analyzed in this study. NDA was manufactured by mixing pine cone byproduct with three species of microorganisms and water containing mineral nutrients and molasses, and then by incubating for 48 hours at $30^{\circ}C$. Lab scale experiments were done with three treatment groups, T1 (control, sawdust treatment), T2 (microorganisms and sawdust treatment group), and T3 (NDA and sawdust treatment group). During composting, temperatures reached over $55^{\circ}C$, a minimum temperature for the inactivation of pathogenic microorganisms. No differences were found in physicochemical composition of compost among treatments. However, it was observed that over usage of NDA could obstruct temperature increase, since the biodegradation rate of organic matter of NDA was relatively low, Nitrogen loss due to ammonia gas emission, which normally happens during composting, was reduced by using NDA, and hence the nitrogen level of final compost was higher in T3 than in others. During experiment, it was found that ammonia gas emission was entirely lasted through compositing duration, but the $CH_3SH$ and $H_2S$ gases were produced only at early stage of composting. The ammonia concentration trapped in $H_2SO_4$ solution during 31 days of composting in T1, T2 and T3 was 12,660mg/L, 11,598mg/L and 7,367mg/L, respectively, showing distinguishable reduction of ammonia gas emission in T3. The emissions of $CH_3SH$ and $H_2S$ gases were also remarkably reduced in T3. Based on these obtained results, usage of the deodorizing agent made with pine cone byproduct could reduce the emission of malodor during composting, without any deterioration of compost quality.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.103-109
• /
• 2016

Polyethylene pipes has useful benefits which are anti-corrosive and flexible material, so it is used to gas pipes but also class 3 water pipes of nuclear power plant, process pipes of petrochemical plant and chemical plant. So the usage of polyethylene pipes is widely increased. But it has been limited for the usage of polyethylene, because it can not be directly detected to fusion joints by using non destructive evaluation. Polyethylene pipes are connected by two methods, one is butt fusion and the other is electrofusion. Butt fusion is widely used to connecting the pipes. It is proposed to method for determining the reliability of joints in this study that is detection of the melt flow zone at fusion joints. In this study, middle density polyethylene is used, outside diameter of the test specimen is 225mm and thickness is 20.5mm. Speed of ultrasonic of this test specimen is 2,200m/s. Test specimens were fabricated by varying the heating time which means from 0% to 130% applying time through heating plate to polyethylene for detecting melt flow zone. Also 4 additional test specimens were made, one was made that not scrapping attached surface of pipes but applying 100% of the proper heating time and the others were made to include of soil, gravel and vinly tape paper at fusion joints, that were also applied 100% of proper heating time. Ultrasonic testing to measure the melt flow zone of 20 test specimens was conducted by using 3.5MHz and 5.0MHz ultrasonic probes and melt flow zone measuring was conducted to three times at different point to one specimen. To differentiate the melt flow zone signal, post image processing was equally conducted to all test results and image levels, contrast, sharpen, threshold were adopted to all teat results and the test results were displayed gray scale. From the results, for the shorter heating times the reflection area of multiple echo have been increased, so the data was obtained from the position where it can be eliminated as much as possible. At 80% of proper heating time(168 sec.), the signal of melt flow zone was obtained clearly, so measuring could be conducted. From 7% of proper heating time(15 sec.) to shorter heating times. we could not obtain the signal because test specimen was not fused. From the result, we can verify that measuring of melt flow zone by using phased array ultrasonic imaging method is possible. And we can verify to complete and incomplete butt fusion by measuring the melt flow zone.

• Management & Information Systems Review
• /
• v.36 no.5
• /
• pp.45-60
• /
• 2017

This study aims to elucidate the key improvements through the current state of customer support for smart home services based on the Internet of things and the evaluation of user's usage. Smart home services typically provide a wide range of value in terms of security, safety, manageability (electricity and water use), convenience, and remote management accessibility. In this study, we analyzed the current state of smart home service based on Internet of Samsung, SKT and LG U + companies in Korea. However, since LG U+ is the only company providing user reviews, there is a limit to generalization, but we are trying to figure out whether the customer value is conveyed properly or not, and in which part the customer support is focused to support the service. As a result of analyzing the results of the study, we found that the smart home service is commercialized and marketed in various forms. However, it is questionable whether the technological level and user satisfaction level are sufficiently satisfied. The results of this study are as follows. First, although each company provides usage guidance, they still ask many questions about joining products and using products. Second, there are many defects in the product itself, and it is found that the companies are not satisfied with the overall response. Third, the three companies are focusing on switches, outlets, sensors, and lamps. This is an individual intelligent product rather than an interlocking or linking level, and it can be seen that there are many parts that are not compatible with the concept of the original Internet of things. In conclusion, this study shows that there are still many areas to improve on the level of customer service provision of smart home service, in particular, the ease of use is low and the quality of products is not reliable. We would like to present the improvement of this in detail through this study and reflect the companies that provide it and the service providers.

• Journal of Sericultural and Entomological Science
• /
• v.23 no.1
• /
• pp.47-55
• /
• 1981

Silk textile finishing has been studied for many years by many workers in order to meet more utilities for various endusers. Such studies, however, could not be successful because any natural fibers are hardly change their natures by artificial treating methods. Textile finishing is of course to improve the mechandise qualities and the poor natures of silk so that it may be available as the best textile fiber in the world. Sometimes, famous trade marked textile plays more power than its quality in the silk market, nevertheless, this should be over line of research activities. Meantime, the silk demand has been also transferred from ladies stocking to other clothes since nylon or other synthetic fibers were developed. That is why, the extension of silk demand should be developed by various research works. Specially, silk is known as difficult textile to handle it during washing or ironing process which happened to depress down the silk usage for house wives. In order to solve such problems, the reporter has been worked for many years and now, he believes that he has developed a proper finishing method to coversuch problems. The developed finishing method may be said to eligible with economical aspect and shorten the dry duration after water washing in half against normal silk textile without harming the specific silk nature. As all of us know, silk fiber starts to denature since it was spinned by silkworm and the fiber is formed as overlapped "S" type curves during its concooning process. After it is made as raw silk or sericin silk, it shows as straight line form, but it changes in to waved form in case refining or degumming process in order return to its original spinned form. Such nature is continued during its textile form and ends with hard ironing nature than other textile fibers. Mean while, the silk fiber keeps to continue its denaturing and this is iniciated by repeat of washing and drying which takes many years to reach its final stage, The reporter has found the iniciating denature of silk by his finishing process, with out heat, decreasing the swollen nature which ended with shortening the drying duration after wash. Each washing was carried out by soaking the previously weighed sample in cold water for one hour, then pressed the sample for ten minutes to eliminate its free water component before weighing with same condition. According to this, the treated silk showed much denaturing after the finishing, but the standard silk progressed the denaturing by and by with the repeat of washing and drying, finally reached the same swollen degree of treated silk, Such treating result explains that the treated silk happened to be stebilized nature by the treating immediately. On the other that the treated silk happened to be stebilized nature by the treating immediately. On the other hand, standard silk may reach to such condition by the time of worn out clothes after repeat of washing and drying for many years while the clothes will be no more useful. The decreased swelling nature has brought about the drying period in half against standard silk after all. Not only the tests of tenacity and elongation but also crease resistance recovery, stiffness and shrinkage tests were carried out after each washing and drying which he has found better result on the treated silk textile against the standard silk. The most important thing was to keep the textile feeling of silk by such finishing work before improve any poor nature of silk. The general silk has a nature to absorb smoke or dirt from its surrounding air and reaches to dirty color shade upon such exposure, but the treated one has improved such nature because of its artificial denaturing, another word, it keeps clean longer than the normal silk. Many previous finishing works could improve some specific nature of silk, but it happened to deprave other important natures. The reporters work is, however, specialized to improve the silk to be useful as Wash and Wear Silk without harming its standard natures. So far, this work happened to be a overall innovative finishing method of silk textile.